[PATCH v3 5/6] ASoC: dt-bindings: mediatek,mt7986-wm8960: add mt7986-wm8960 document

[Maso Huang (黃加竹)]

On Mon, 2023-07-31 at 16:56 +0200, Krzysztof Kozlowski wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  On 31/07/2023 10:14, Krzysztof Kozlowski wrote:
> >>>> +  mediatek,audio-codec:
> >>>> +    $ref: /schemas/types.yaml#/definitions/phandle
> >>>> +    description: The phandle of wm8960 codec.
> >>>> +
> >>>
> >>> How did you implement Rob's comment? Or did you just ignore it?
> >>>
> >>> Best regards,
> >>> Krzysztof
> >>>
> >>
> >> Hi Krzysztof,
> >>
> >> Sorry, I did not mean to ignore Rob's comment.
> >> I waited for some suggestion in mail below, but it seems Rob was a
> >> little busy.
> >>
> >> 
> https://lore.kernel.org/lkml/8c6316e79e40406e4d46709f602dcb14a4c00562.camel@mediatek.com/
> >>
> >> After gentle ping last week and receiving your advice, I thought
> that
> >> means to send the v3 patch and might discuss dtbingding in v3
> series.
> >>
> >> So sorry for misunderstanding it, I'll check the details with Rob
> in v3
> >> series then refine it in v4.
> > 
> > The problem is that you did not reference in this patch any ongoing
> > discussion and further questions, so comment looks like addressed,
> while
> > it was not.
> > 
> > Rob said:
> > "in a common schema and reference them "
> > You said:
> > "common part yaml and reference to it"
> > so I think you both agreed on the same.
> > 
> > The advice would be to create common binding which is then
> referenced by
> > other and your bindings. However if you start doing it, you will
> notice
> > that it is impossible, because you have conflicting types for
> > "audio-codec", so you cannot have one definition.
> > 
> > This leads to the point - property is probably wrong and you need
> > dai-link with sound-dai property, just like most cards are doing.
> 
> BTW, might be useful for you, just sent:
> 
https://lore.kernel.org/linux-devicetree/20230731094303.185067-1-krzysztof.kozlowski@linaro.org/T/#t
> 
> Anyway you need dai-links, I think.
> 
> Best regards,
> Krzysztof
> 

Hi Krzysztof,

Thanks for your useful info!
I'll reference to sound-card-common.yaml for audio-routing.

For mediatek,platform and mediatek,audio-codec, I would like to replace
them with cpu and codec as properties directly like below.

cpu {
    sound-dai <&ate>;
};

codec {
    sound-dai <&wm8960>;
};

Is that OK?

Best regards,
Maso