[PATCH 7/8] wifi: mt76: connac: add more unified command IDs

[Deren Wu]

Add more unified command IDs which will be used in new chipset.

This is the preliminary patch for mt7925 support.

Co-developed-by: Lorenzo Bianconi <lorenzo at kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
Signed-off-by: Deren Wu <deren.wu at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
index ed70bde1428b..6ab86b1925f5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
@@ -796,6 +796,7 @@ enum {
 	STA_REC_PHY = 0x15,
 	STA_REC_HE_6G = 0x17,
 	STA_REC_HE_V2 = 0x19,
+	STA_REC_MLD = 0x20,
 	STA_REC_EHT = 0x22,
 	STA_REC_HDRT = 0x28,
 	STA_REC_HDR_TRANS = 0x2B,
@@ -1212,12 +1213,17 @@ enum {
 	MCU_UNI_CMD_RX_HDR_TRANS = 0x12,
 	MCU_UNI_CMD_SER = 0x13,
 	MCU_UNI_CMD_TWT = 0x14,
+	MCU_UNI_CMD_SET_DOMAIN_INFO = 0x15,
+	MCU_UNI_CMD_SCAN_REQ = 0x16,
 	MCU_UNI_CMD_RDD_CTRL = 0x19,
 	MCU_UNI_CMD_GET_MIB_INFO = 0x22,
+	MCU_UNI_CMD_GET_STAT_INFO = 0x23,
 	MCU_UNI_CMD_SNIFFER = 0x24,
 	MCU_UNI_CMD_SR = 0x25,
 	MCU_UNI_CMD_ROC = 0x27,
+	MCU_UNI_CMD_SET_DBDC_PARMS = 0x28,
 	MCU_UNI_CMD_TXPOWER = 0x2b,
+	MCU_UNI_CMD_SET_POWER_LIMIT = 0x2c,
 	MCU_UNI_CMD_EFUSE_CTRL = 0x2d,
 	MCU_UNI_CMD_RA = 0x2f,
 	MCU_UNI_CMD_MURU = 0x31,
@@ -1296,6 +1302,7 @@ enum {
 	UNI_BSS_INFO_IFS_TIME = 23,
 	UNI_BSS_INFO_OFFLOAD = 25,
 	UNI_BSS_INFO_MLD = 26,
+	UNI_BSS_INFO_PM_DISABLE = 27,
 };
 
 enum {
-- 
2.18.0