[PATCH 1/2] dt-bindings: input: goodix: Add powered-in-suspend property

[Matthias Brugger]

On 18/04/2023 14:49, Fei Shao wrote:
> We observed that on Chromebook device Steelix, if Goodix GT7375P
> touchscreen is powered in suspend (because, for example, it connects to
> an always-on regulator) and with the reset GPIO asserted, it will
> introduce about 14mW power leakage.
> 
> This property is used to indicate that the touchscreen is powered in
> suspend. If it's set, the driver will stop asserting the reset GPIO in
> power-down, and it will do it in power-up instead to ensure that the
> state is always reset after resuming.
> 
> Signed-off-by: Fei Shao <fshao at chromium.org>

Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>

> ---
> 
>   Documentation/devicetree/bindings/input/goodix,gt7375p.yaml | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
> index ce18d7dadae2..942acb286d77 100644
> --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
> +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
> @@ -43,6 +43,12 @@ properties:
>         itself as long as it allows the main board to make signals compatible
>         with what the touchscreen is expecting for its IO rails.
>   
> +  powered-in-suspend:
> +    description:
> +      This indicates that the touchscreen is powered in suspend, so the driver
> +      will not assert the reset GPIO in power-down to prevent power leakage.
> +    type: boolean
> +
>   required:
>     - compatible
>     - reg