[PATCH v3] ARM:unwind:fix unwind abort for uleb128 case

[Linus Walleij]

On Fri, Apr 14, 2023 at 8:10 AM Haibo Li <haibo.li at mediatek.com> wrote:

> When unwind instruction is 0xb2,the subsequent instructions
> are uleb128 bytes.
> For now,it uses only the first uleb128 byte in code.
>
> For vsp increments of 0x204~0x400,use one uleb128 byte like below:
> 0xc06a00e4 <unwind_test_work>: 0x80b27fac
>   Compact model index: 0
>   0xb2 0x7f vsp = vsp + 1024
>   0xac      pop {r4, r5, r6, r7, r8, r14}
>
> For vsp increments larger than 0x400,use two uleb128 bytes like below:
> 0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
>   Compact model index: 1
>   0xb2 0x81 0x01 vsp = vsp + 1032
>   0xac      pop {r4, r5, r6, r7, r8, r14}
> The unwind works well since the decoded uleb128 byte is also 0x81.
>
> For vsp increments larger than 0x600,use two uleb128 bytes like below:
> 0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
>   Compact model index: 1
>   0xb2 0x81 0x02 vsp = vsp + 1544
>   0xac      pop {r4, r5, r6, r7, r8, r14}
> In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)).
> While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)).
> The unwind aborts at this frame since it gets incorrect vsp.
>
> To fix this,add uleb128 decode to cover all the above case.
>
> Signed-off-by: Haibo Li <haibo.li at mediatek.com>

Way to go, remember to collect all the Reviewed-by tags before
you put the patch into Russell's patch tracker.

Yours,
Linus Walleij