[PATCH v2] ARM:unwind:fix unwind abort for uleb128 case
Haibo Li
haibo.li at mediatek.com
Thu Apr 13 00:34:29 PDT 2023
When unwind instruction is 0xb2,the subsequent instructions
are uleb128 bytes.
For now,it uses only the first uleb128 byte in code.
For vsp increments of 0x204~0x400,use one uleb128 byte like below:
0xc06a00e4 <unwind_test_work>: 0x80b27fac
Compact model index: 0
0xb2 0x7f vsp = vsp + 1024
0xac pop {r4, r5, r6, r7, r8, r14}
For vsp increments larger than 0x400,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x01 vsp = vsp + 1032
0xac pop {r4, r5, r6, r7, r8, r14}
The unwind works well since the decoded uleb128 byte is also 0x81.
For vsp increments larger than 0x600,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0x81 0x02 vsp = vsp + 1544
0xac pop {r4, r5, r6, r7, r8, r14}
In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)).
While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)).
The unwind aborts at this frame since it gets incorrect vsp.
To fix this,add uleb128 decode to cover all the above case.
Signed-off-by: Haibo Li <haibo.li at mediatek.com>
---
v2:
- As Linus Walleij and Alexandre Mergnat suggested,add comments for unwind_decode_uleb128
- As Alexandre Mergnat suggested,change variables declaration in Alphabetical order
---
arch/arm/kernel/unwind.c | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 53be7ea6181b..f37e55fcf81d 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -308,6 +308,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
return URC_OK;
}
+static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl)
+{
+ unsigned long bytes = 0;
+ unsigned long insn;
+ unsigned long result = 0;
+
+ /* unwind_get_byte() will advance ctrl one instruction at a time,
+ * we loop until we get an instruction byte where bit 7 is not set.
+ * Note:It decodes max 4 bytes to output 28bits data.
+ * 28bits data(0xfffffff) covers vsp increments of 1073742336.
+ * It is sufficent for unwinding stack.
+ */
+ do {
+ insn = unwind_get_byte(ctrl);
+ result |= (insn & 0x7f) << (bytes * 7);
+ bytes++;
+ if (bytes == sizeof(result))
+ break;
+ } while (!!(insn & 0x80));
+
+ return result;
+}
+
/*
* Execute the current unwind instruction.
*/
@@ -361,7 +384,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
if (ret)
goto error;
} else if (insn == 0xb2) {
- unsigned long uleb128 = unwind_get_byte(ctrl);
+ unsigned long uleb128 = unwind_decode_uleb128(ctrl);
ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
} else {
--
2.25.1
More information about the Linux-mediatek
mailing list