[RFC PATCH v2 net-next 01/14] net: dsa: mt7530: fix comments regarding port 5 and 6 for both switches

[Arınç ÜNAL]

On 10.04.2023 17:30, Daniel Golle wrote:
> On Fri, Apr 07, 2023 at 04:46:13PM +0300, arinc9.unal at gmail.com wrote:
>> From: Arınç ÜNAL <arinc.unal at arinc9.com>
>>
>> There's no logic to numerically order the CPU ports. State the port number
>> and its being a CPU port instead.
> 
> Port 5 is often used as a user port as well, eg. on the BPi-R3 where
> it serves to provide SerDes for the 2nd SFP cage.
> On other boards (e.g. Netgear WAX-206) it is used to connect a 2.5G
> PHY used as WAN port.
> 
> Hence just stating that port 5 "a CPU port" could be a bit misleading
> as it is not always used as a CPU port.

Makes sense. I was not using the DSA term, so the "a CPU port" here 
rather meant that the port connects to the CPU. I'll change it to "which 
can be used as a CPU port" on both ports, that should explain that it 
can be used as other than a CPU port, and it does not necessarily 
connect to a CPU MAC.

Thanks.
Arınç