[RFC PATCH net-next] net: dsa: mt7530: fix port specifications for MT7988

Arınç ÜNAL arinc.unal at arinc9.com
Thu Apr 6 03:24:45 PDT 2023


Port 6 configuration is shared so it's simpler to put a label.

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 6fbbdcb5987f..009f2c0948d6 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2548,7 +2548,7 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
  	phy_interface_zero(config->supported_interfaces);
  
  	switch (port) {
-	case 0 ... 4: /* Internal phy */
+	case 0 ... 3: /* Internal phy */
  		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
  			  config->supported_interfaces);
  		break;
@@ -2710,37 +2710,50 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
  	struct mt7530_priv *priv = ds->priv;
  	u32 mcr_cur, mcr_new;
  
-	switch (port) {
-	case 0 ... 4: /* Internal phy */
-		if (state->interface != PHY_INTERFACE_MODE_GMII &&
-		    state->interface != PHY_INTERFACE_MODE_INTERNAL)
+	if (priv->id == ID_MT7988) {
+		switch (port) {
+		case 0 ... 3: /* Internal phy */
+			if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
+				goto unsupported;
+			break;
+		case 6: /* Port 6, a CPU port. */
+			goto port6;
+		default:
  			goto unsupported;
-		break;
-	case 5: /* Port 5, a CPU port. */
-		if (priv->p5_interface == state->interface)
+		}
+	} else {
+		switch (port) {
+		case 0 ... 4: /* Internal phy */
+			if (state->interface != PHY_INTERFACE_MODE_GMII)
+				goto unsupported;
  			break;
+		case 5: /* Port 5, a CPU port. */
+			if (priv->p5_interface == state->interface)
+				break;
  
-		if (mt753x_mac_config(ds, port, mode, state) < 0)
-			goto unsupported;
+			if (mt753x_mac_config(ds, port, mode, state) < 0)
+				goto unsupported;
  
-		if (priv->p5_intf_sel == P5_INTF_SEL_GMAC5 ||
-		    priv->p5_intf_sel == P5_INTF_SEL_GMAC5_SGMII)
-			priv->p5_interface = state->interface;
-		break;
-	case 6: /* Port 6, a CPU port. */
-		if (priv->p6_interface == state->interface)
+			if (priv->p5_intf_sel == P5_INTF_SEL_GMAC5 ||
+			priv->p5_intf_sel == P5_INTF_SEL_GMAC5_SGMII)
+				priv->p5_interface = state->interface;
  			break;
+		case 6: /* Port 6, a CPU port. */
+port6:
+			if (priv->p6_interface == state->interface)
+				break;
  
-		if (mt753x_mac_config(ds, port, mode, state) < 0)
-			goto unsupported;
+			if (mt753x_mac_config(ds, port, mode, state) < 0)
+				goto unsupported;
  
-		priv->p6_interface = state->interface;
-		break;
-	default:
+			priv->p6_interface = state->interface;
+			break;
+		default:
  unsupported:
-		dev_err(ds->dev, "%s: unsupported %s port: %i\n",
-			__func__, phy_modes(state->interface), port);
-		return;
+			dev_err(ds->dev, "%s: unsupported %s port: %i\n",
+				__func__, phy_modes(state->interface), port);
+			return;
+		}
  	}
  
  	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));

Arınç



More information about the Linux-mediatek mailing list