[PATCH v3 1/3] dt-bindings: pinctrl: mediatek: deprecate custom drive strength property

[Alexandre Mergnat]

Deprecate mediatek,drive-strength-adv which shall not exist, that was an
unnecessary property that leaked upstream from downstream kernels and
there's no reason to use it.

The generic property drive-strength-microamp should be used instead.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat at baylibre.com>
---
 .../devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml      | 8 ++++++--
 .../devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml      | 6 +++++-
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
index bf67d4672455..ff24cf29eea7 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -110,8 +110,13 @@ patternProperties:
           drive-strength:
             enum: [2, 4, 6, 8, 10, 12, 14, 16]
 
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
           mediatek,drive-strength-adv:
+            deprecated: true
             description: |
+              DEPRECATED: Please use drive-strength-microamp instead.
               Describe the specific driving setup property.
               For I2C pins, the existing generic driving setup can only support
               2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
@@ -217,7 +222,7 @@ examples:
               pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
                 <PINMUX_GPIO49__FUNC_SDA5>;
               mediatek,pull-up-adv = <3>;
-              mediatek,drive-strength-adv = <7>;
+              drive-strength-microamp = <1000>;
             };
           };
 
@@ -226,7 +231,6 @@ examples:
               pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
                 <PINMUX_GPIO51__FUNC_SDA3>;
               mediatek,pull-down-adv = <2>;
-              mediatek,drive-strength-adv = <4>;
             };
           };
         };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
index 5aa8ba4cb547..dce9fd1a6a72 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
@@ -91,8 +91,13 @@ patternProperties:
 
           input-schmitt-disable: true
 
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
           mediatek,drive-strength-adv:
+            deprecated: true
             description: |
+              DEPRECATED: Please use drive-strength-microamp instead.
               Describe the specific driving setup property.
               For I2C pins, the existing generic driving setup can only support
               2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
@@ -191,7 +196,6 @@ examples:
           pins {
             pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>, <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
             mediatek,pull-up-adv = <3>;
-            mediatek,drive-strength-adv = <00>;
             bias-pull-up;
           };
         };

-- 
2.25.1