[PATCH 2/2] usb: mtu3: fix failed runtime suspend in host only mode

[Chunfeng Yun]

When the dr_mode is "host", after the host enter runtime suspend,
the mtu3 can't do it, because the mtu3's device wakeup function is
not enabled, instead it's enabled in gadget init function, to fix
the issue, init wakeup early in mtu3's probe()

Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode")
Reported-by: Tianping Fang <tianping.fang at mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
 drivers/usb/mtu3/mtu3_core.c | 2 --
 drivers/usb/mtu3/mtu3_plat.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 0ca173af87bb..a3a6282893d0 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -978,8 +978,6 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 		goto irq_err;
 	}
 
-	device_init_wakeup(dev, true);
-
 	/* power down device IP for power saving by default */
 	mtu3_stop(mtu);
 
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 4cb65346789d..d78ae52b4e26 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -356,6 +356,8 @@ static int mtu3_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
+	device_init_wakeup(dev, true);
+
 	ret = ssusb_rscs_init(ssusb);
 	if (ret)
 		goto comm_init_err;
-- 
2.18.0