[PATCH v5 5/6] iommu: Use EINVAL for incompatible device/domain in ->attach_dev
Nicolin Chen
nicolinc at nvidia.com
Thu Sep 22 01:54:34 PDT 2022
Following the new rules in include/linux/iommu.h kdocs, update all drivers
->attach_dev callback functions to return EINVAL in the failure paths that
are related to domain incompatibility.
Also, drop adjacent error prints to prevent a kernel log spam.
Reviewed-by: Jean-Philippe Brucker <jean-philippe at linaro.org>
Reviewed-by: Lu Baolu <baolu.lu at linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian at intel.com>
Signed-off-by: Nicolin Chen <nicolinc at nvidia.com>
---
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 11 +----------
drivers/iommu/arm/arm-smmu/arm-smmu.c | 3 ---
drivers/iommu/arm/arm-smmu/qcom_iommu.c | 7 +------
drivers/iommu/intel/iommu.c | 10 +++-------
drivers/iommu/ipmmu-vmsa.c | 2 --
drivers/iommu/omap-iommu.c | 2 +-
drivers/iommu/sprd-iommu.c | 4 +---
drivers/iommu/tegra-gart.c | 2 +-
drivers/iommu/virtio-iommu.c | 3 +--
9 files changed, 9 insertions(+), 35 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index d32b02336411..f96f8aad8280 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2429,23 +2429,14 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
goto out_unlock;
}
} else if (smmu_domain->smmu != smmu) {
- dev_err(dev,
- "cannot attach to SMMU %s (upstream of %s)\n",
- dev_name(smmu_domain->smmu->dev),
- dev_name(smmu->dev));
- ret = -ENXIO;
+ ret = -EINVAL;
goto out_unlock;
} else if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1 &&
master->ssid_bits != smmu_domain->s1_cfg.s1cdmax) {
- dev_err(dev,
- "cannot attach to incompatible domain (%u SSID bits != %u)\n",
- smmu_domain->s1_cfg.s1cdmax, master->ssid_bits);
ret = -EINVAL;
goto out_unlock;
} else if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1 &&
smmu_domain->stall_enabled != master->stall_enabled) {
- dev_err(dev, "cannot attach to stall-%s domain\n",
- smmu_domain->stall_enabled ? "enabled" : "disabled");
ret = -EINVAL;
goto out_unlock;
}
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c
index dfa82df00342..dbd12da31707 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c
@@ -1167,9 +1167,6 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
* different SMMUs.
*/
if (smmu_domain->smmu != smmu) {
- dev_err(dev,
- "cannot attach to SMMU %s whilst already attached to domain on SMMU %s\n",
- dev_name(smmu_domain->smmu->dev), dev_name(smmu->dev));
ret = -EINVAL;
goto rpm_put;
}
diff --git a/drivers/iommu/arm/arm-smmu/qcom_iommu.c b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
index 17235116d3bb..37c5ddc212c1 100644
--- a/drivers/iommu/arm/arm-smmu/qcom_iommu.c
+++ b/drivers/iommu/arm/arm-smmu/qcom_iommu.c
@@ -381,13 +381,8 @@ static int qcom_iommu_attach_dev(struct iommu_domain *domain, struct device *dev
* Sanity check the domain. We don't support domains across
* different IOMMUs.
*/
- if (qcom_domain->iommu != qcom_iommu) {
- dev_err(dev, "cannot attach to IOMMU %s while already "
- "attached to domain on IOMMU %s\n",
- dev_name(qcom_domain->iommu->dev),
- dev_name(qcom_iommu->dev));
+ if (qcom_domain->iommu != qcom_iommu)
return -EINVAL;
- }
return 0;
}
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 31bc50e538a3..b1788b3d3b2d 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4181,19 +4181,15 @@ static int prepare_domain_attach_device(struct iommu_domain *domain,
return -ENODEV;
if (dmar_domain->force_snooping && !ecap_sc_support(iommu->ecap))
- return -EOPNOTSUPP;
+ return -EINVAL;
/* check if this iommu agaw is sufficient for max mapped address */
addr_width = agaw_to_width(iommu->agaw);
if (addr_width > cap_mgaw(iommu->cap))
addr_width = cap_mgaw(iommu->cap);
- if (dmar_domain->max_addr > (1LL << addr_width)) {
- dev_err(dev, "%s: iommu width (%d) is not "
- "sufficient for the mapped address (%llx)\n",
- __func__, addr_width, dmar_domain->max_addr);
- return -EFAULT;
- }
+ if (dmar_domain->max_addr > (1LL << addr_width))
+ return -EINVAL;
dmar_domain->gaw = addr_width;
/*
diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index 1d42084d0276..f5217a4cb9b3 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -628,8 +628,6 @@ static int ipmmu_attach_device(struct iommu_domain *io_domain,
* Something is wrong, we can't attach two devices using
* different IOMMUs to the same domain.
*/
- dev_err(dev, "Can't attach IPMMU %s to domain on IPMMU %s\n",
- dev_name(mmu->dev), dev_name(domain->mmu->dev));
ret = -EINVAL;
} else
dev_info(dev, "Reusing IPMMU context %u\n", domain->context_id);
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index 447e40d55918..be12f49140c7 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -1472,7 +1472,7 @@ omap_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
/* only a single client device can be attached to a domain */
if (omap_domain->dev) {
dev_err(dev, "iommu domain is already attached\n");
- ret = -EBUSY;
+ ret = -EINVAL;
goto out;
}
diff --git a/drivers/iommu/sprd-iommu.c b/drivers/iommu/sprd-iommu.c
index 511959c8a14d..945576039c9e 100644
--- a/drivers/iommu/sprd-iommu.c
+++ b/drivers/iommu/sprd-iommu.c
@@ -237,10 +237,8 @@ static int sprd_iommu_attach_device(struct iommu_domain *domain,
struct sprd_iommu_domain *dom = to_sprd_domain(domain);
size_t pgt_size = sprd_iommu_pgt_size(domain);
- if (dom->sdev) {
- pr_err("There's already a device attached to this domain.\n");
+ if (dom->sdev)
return -EINVAL;
- }
dom->pgt_va = dma_alloc_coherent(sdev->dev, pgt_size, &dom->pgt_pa, GFP_KERNEL);
if (!dom->pgt_va)
diff --git a/drivers/iommu/tegra-gart.c b/drivers/iommu/tegra-gart.c
index e5ca3cf1a949..ed53279d1106 100644
--- a/drivers/iommu/tegra-gart.c
+++ b/drivers/iommu/tegra-gart.c
@@ -112,7 +112,7 @@ static int gart_iommu_attach_dev(struct iommu_domain *domain,
spin_lock(&gart->dom_lock);
if (gart->active_domain && gart->active_domain != domain) {
- ret = -EBUSY;
+ ret = -EINVAL;
} else if (dev_iommu_priv_get(dev) != domain) {
dev_iommu_priv_set(dev, domain);
gart->active_domain = domain;
diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
index 4c652773fd6c..87128266b6e3 100644
--- a/drivers/iommu/virtio-iommu.c
+++ b/drivers/iommu/virtio-iommu.c
@@ -733,8 +733,7 @@ static int viommu_attach_dev(struct iommu_domain *domain, struct device *dev)
*/
ret = viommu_domain_finalise(vdev, domain);
} else if (vdomain->viommu != vdev->viommu) {
- dev_err(dev, "cannot attach to foreign vIOMMU\n");
- ret = -EXDEV;
+ ret = -EINVAL;
}
mutex_unlock(&vdomain->mutex);
--
2.17.1
More information about the Linux-mediatek
mailing list