[PATCH v1 04/17] dt-bindings: display: mediatek: add MT8195 hdmi bindings

[Guillaume Ranquet]

Add mt8195 SoC bindings for hdmi and hdmi-ddc

Make port1 optional for mt8195 as it only supports HDMI tx for now.
Requires a ddc-i2c-bus phandle.
Requires a power-domains phandle.

Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
index bdaf0b51e68c..abb231a0694b 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -21,6 +21,10 @@ properties:
       - mediatek,mt7623-hdmi
       - mediatek,mt8167-hdmi
       - mediatek,mt8173-hdmi
+      - mediatek,mt8195-hdmi
+
+  clocks: true
+  clock-names: true
 
   reg:
     maxItems: 1
@@ -28,20 +32,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks:
-    items:
-      - description: Pixel Clock
-      - description: HDMI PLL
-      - description: Bit Clock
-      - description: S/PDIF Clock
-
-  clock-names:
-    items:
-      - const: pixel
-      - const: pll
-      - const: bclk
-      - const: spdif
-
   phys:
     maxItems: 1
 
@@ -58,6 +48,16 @@ properties:
     description: |
       phandle link and register offset to the system configuration registers.
 
+  ddc-i2c-bus:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: Phandle to the ddc-i2c device
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier as defined by bindings
+      of the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -76,7 +76,6 @@ properties:
 
     required:
       - port at 0
-      - port at 1
 
 required:
   - compatible
@@ -86,9 +85,55 @@ required:
   - clock-names
   - phys
   - phy-names
-  - mediatek,syscon-hdmi
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-hdmi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: APB
+            - description: HDCP
+            - description: HDCP 24M
+            - description: Split HDMI
+        clock-names:
+          items:
+            - const: hdmi_apb_sel
+            - const: hdcp_sel
+            - const: hdcp24_sel
+            - const: split_hdmi
+
+      required:
+        - power-domains
+        - ddc-i2c-bus
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Pixel Clock
+            - description: HDMI PLL
+            - description: Bit Clock
+            - description: S/PDIF Clock
+
+        clock-names:
+          items:
+            - const: pixel
+            - const: pll
+            - const: bclk
+            - const: spdif
+
+        ports:
+          required:
+            - port at 1
+
+      required:
+        - mediatek,syscon-hdmi
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
new file mode 100644
index 000000000000..3c80bcebe6d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI DDC Device Tree Bindings for mt8195
+
+maintainers:
+  - CK Hu <ck.hu at mediatek.com>
+  - Jitao shi <jitao.shi at mediatek.com>
+
+description: |
+  The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-hdmi-ddc
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ddc-i2c
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    hdmiddc0: ddc_i2c {
+      compatible = "mediatek,mt8195-hdmi-ddc";
+      clocks = <&clk26m>;
+      clock-names = "ddc-i2c";
+    };
+
+...

-- 
b4 0.10.0-dev