[PATCH v1 11/12] drm/bridge: Drop drm_bridge_funcs.mode_fixup

Laurent Pinchart laurent.pinchart at ideasonboard.com
Mon Sep 19 08:34:21 PDT 2022


Hi Sam,

Thank you for the patch.

On Sun, Jul 17, 2022 at 07:58:00PM +0200, Sam Ravnborg wrote:
> All users are converted over to drm_bridge_funcs.atomic_check()
> so it is safe to drop the mode_fixup support.
> 
> Update the comment for atomic_check with relevant parts from mode_fixup.
> 
> Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
> Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> Cc: Maxime Ripard <mripard at kernel.org>
> Cc: Thomas Zimmermann <tzimmermann at suse.de>
> Cc: David Airlie <airlied at linux.ie>
> Cc: Daniel Vetter <daniel at ffwll.ch>

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

> ---
>  drivers/gpu/drm/drm_bridge.c |  7 +----
>  include/drm/drm_bridge.h     | 60 ++++++++++--------------------------
>  2 files changed, 17 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> index b6f56d8f3547..3f5acb19957c 100644
> --- a/drivers/gpu/drm/drm_bridge.c
> +++ b/drivers/gpu/drm/drm_bridge.c
> @@ -685,10 +685,6 @@ static int drm_atomic_bridge_check(struct drm_bridge *bridge,
>  						  crtc_state, conn_state);
>  		if (ret)
>  			return ret;
> -	} else if (bridge->funcs->mode_fixup) {
> -		if (!bridge->funcs->mode_fixup(bridge, &crtc_state->mode,
> -					       &crtc_state->adjusted_mode))
> -			return -EINVAL;
>  	}
>  
>  	return 0;
> @@ -934,8 +930,7 @@ drm_atomic_bridge_propagate_bus_flags(struct drm_bridge *bridge,
>   * @conn_state: new connector state
>   *
>   * First trigger a bus format negotiation before calling
> - * &drm_bridge_funcs.atomic_check() (falls back on
> - * &drm_bridge_funcs.mode_fixup()) op for all the bridges in the encoder chain,
> + * &drm_bridge_funcs.atomic_check() op for all the bridges in the encoder chain,
>   * starting from the last bridge to the first. These are called before calling
>   * &drm_encoder_helper_funcs.atomic_check()
>   *
> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
> index 7496f41535b1..8c93369bcc74 100644
> --- a/include/drm/drm_bridge.h
> +++ b/include/drm/drm_bridge.h
> @@ -106,7 +106,7 @@ struct drm_bridge_funcs {
>  	 * to look at anything else but the passed-in mode, and validate it
>  	 * against configuration-invariant hardward constraints. Any further
>  	 * limits which depend upon the configuration can only be checked in
> -	 * @mode_fixup.
> +	 * @atomic_check.
>  	 *
>  	 * RETURNS:
>  	 *
> @@ -116,46 +116,6 @@ struct drm_bridge_funcs {
>  					   const struct drm_display_info *info,
>  					   const struct drm_display_mode *mode);
>  
> -	/**
> -	 * @mode_fixup:
> -	 *
> -	 * This callback is used to validate and adjust a mode. The parameter
> -	 * mode is the display mode that should be fed to the next element in
> -	 * the display chain, either the final &drm_connector or the next
> -	 * &drm_bridge. The parameter adjusted_mode is the input mode the bridge
> -	 * requires. It can be modified by this callback and does not need to
> -	 * match mode. See also &drm_crtc_state.adjusted_mode for more details.
> -	 *
> -	 * This is the only hook that allows a bridge to reject a modeset. If
> -	 * this function passes all other callbacks must succeed for this
> -	 * configuration.
> -	 *
> -	 * The mode_fixup callback is optional. &drm_bridge_funcs.mode_fixup()
> -	 * is not called when &drm_bridge_funcs.atomic_check() is implemented,
> -	 * so only one of them should be provided.
> -	 *
> -	 * NOTE:
> -	 *
> -	 * This function is called in the check phase of atomic modesets, which
> -	 * can be aborted for any reason (including on userspace's request to
> -	 * just check whether a configuration would be possible). Drivers MUST
> -	 * NOT touch any persistent state (hardware or software) or data
> -	 * structures except the passed in @state parameter.
> -	 *
> -	 * Also beware that userspace can request its own custom modes, neither
> -	 * core nor helpers filter modes to the list of probe modes reported by
> -	 * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure
> -	 * that modes are filtered consistently put any bridge constraints and
> -	 * limits checks into @mode_valid.
> -	 *
> -	 * RETURNS:
> -	 *
> -	 * True if an acceptable configuration is possible, false if the modeset
> -	 * operation should be rejected.
> -	 */
> -	bool (*mode_fixup)(struct drm_bridge *bridge,
> -			   const struct drm_display_mode *mode,
> -			   struct drm_display_mode *adjusted_mode);
>  	/**
>  	 * @disable:
>  	 *
> @@ -466,9 +426,7 @@ struct drm_bridge_funcs {
>  	 * &drm_bridge_funcs.atomic_check() hooks are called in reverse
>  	 * order (from the last to the first bridge).
>  	 *
> -	 * This method is optional. &drm_bridge_funcs.mode_fixup() is not
> -	 * called when &drm_bridge_funcs.atomic_check() is implemented, so only
> -	 * one of them should be provided.
> +	 * This method is optional.
>  	 *
>  	 * If drivers need to tweak &drm_bridge_state.input_bus_cfg.flags or
>  	 * &drm_bridge_state.output_bus_cfg.flags it should happen in
> @@ -478,6 +436,20 @@ struct drm_bridge_funcs {
>  	 * &drm_connector.display_info.bus_flags if the bridge is the last
>  	 * element in the chain.
>  	 *
> +	 * NOTE:
> +	 *
> +	 * This function is called in the check phase of atomic modesets, which
> +	 * can be aborted for any reason (including on userspace's request to
> +	 * just check whether a configuration would be possible). Drivers MUST
> +	 * NOT touch any persistent state (hardware or software) or data
> +	 * structures except the passed in @state parameter.
> +	 *
> +	 * Also beware that userspace can request its own custom modes, neither
> +	 * core nor helpers filter modes to the list of probe modes reported by
> +	 * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure
> +	 * that modes are filtered consistently put any bridge constraints and
> +	 * limits checks into @mode_valid.
> +	 *
>  	 * RETURNS:
>  	 * zero if the check passed, a negative error code otherwise.
>  	 */

-- 
Regards,

Laurent Pinchart



More information about the Linux-mediatek mailing list