[PATCH v5, 1/8] dt-bindings: media: mediatek: vcodec: Adds encoder cores dt-bindings for mt8195

[Krzysztof Kozlowski]

On Fri, 29 Jul 2022 11:51:22 +0800, Irui Wang wrote:
> mt8195 has two H264 encoder hardware, which are named core0 and core1.
> The two encoder cores are independent, we can just enable one core to
> do encoding or enable both of them to achieve higher performance. We
> pick core0 as main device and core1 as its subdevice, it just a way to
> to manage the two encoder hardware, because they are two equal encoder
> hardware with the same function.
> 
> Signed-off-by: Irui Wang <irui.wang at mediatek.com>
> ---
>  .../media/mediatek,vcodec-encoder-core.yaml   | 218 ++++++++++++++++++
>  .../media/mediatek,vcodec-encoder.yaml        |   1 -
>  2 files changed, 218 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-encoder-core.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spi/spi-rockchip.example.dtb: spi at ff110000: Unevaluated properties are not allowed ('pinctrl-0', 'pinctrl-1' were unexpected)
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spi/spi-rockchip.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.