[PATCH v2 net-next 2/6] dt-bindings: net: mediatek: add WED RX binding for MT7986 eth driver

Lorenzo Bianconi lorenzo at kernel.org
Wed Oct 26 03:37:07 PDT 2022 

> On Sun, Oct 23, 2022 at 08:28:06PM +0200, Lorenzo Bianconi wrote:
> > Document the binding for the RX Wireless Ethernet Dispatch core on the
> > MT7986 ethernet driver used to offload traffic received by WLAN NIC and
> > forwarded to LAN/WAN one.
> > 
> > Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
> > ---
> >  .../arm/mediatek/mediatek,mt7622-wed.yaml     | 91 +++++++++++++++++++
> >  .../arm/mediatek/mediatek,mt7986-wo-boot.yaml | 46 ++++++++++
> >  .../arm/mediatek/mediatek,mt7986-wo-ccif.yaml | 49 ++++++++++
> >  .../arm/mediatek/mediatek,mt7986-wo-dlm.yaml  | 50 ++++++++++
> >  4 files changed, 236 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> >  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> >  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> > index 84fb0a146b6e..8e2905004790 100644
> > --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
> > @@ -29,6 +29,41 @@ properties:
> >    interrupts:
> >      maxItems: 1
> >  
> > +  memory-region:
> > +    minItems: 3
> > +    maxItems: 3
> 
> What is each entry? Need to define them.

Is something like the chunk below works for you?

  ....

  memory-region:
    items:
      - description:
          Phandle for the node (wo-emi) used to run firmware EMI region
      - description:
          Phandle for the node (wo-ilm) used to run firmware ILM region
      - description:
          Phandle for the node (wo-data) used to run firmware CPU DATA region

  memory-region-names:
    items:
      - const: wo-emi
      - const: wo-ilm
      - const: wo-data

  ....
> 
> > +    description:
> > +      phandles to nodes describing reserved memory used by mt7986-wed firmware
> > +      (see bindings/reserved-memory/reserved-memory.txt)
> 
> What does that document say?
> 
> (You don't need generic descriptions/refs of common properties)

I used some other bindings as reference (e.g. ti,k3-dsp-rproc.yaml) and
I have not checked the document. I will drop it in v3.

> 
> > +
> > +  mediatek,wo-ccif:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      Phandle to the mediatek wed-wo controller.
> > +
> > +  mediatek,wo-boot:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      Phandle to the mediatek wed-wo boot interface.
> > +
> > +  mediatek,wo-dlm:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      Phandle to the mediatek wed-wo rx hw ring.
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: mediatek,mt7986-wed
> > +    then:
> > +      properties:
> > +        mediatek,wo-boot: true
> > +        mediatek,wo-ccif: true
> > +        mediatek,wo-dlm: true
> > +        memory-region: true
> 
> This does nothing. You need the opposite? Disallow these properties for 
> 7622?

ack, I will fix in v3.

> 
> > +
> >  required:
> >    - compatible
> >    - reg
> > @@ -49,3 +84,59 @@ examples:
> >          interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
> >        };
> >      };
> > +
> > +  - |
> 
> Why a new example? 

do you mean to drop mt7986-wed example or squash it with mt7622-wed one?
Something like:

wed0: wed at 1020a000 {
    compatible = "mediatek,mt7622-wed","syscon";
    ....
};

wed1: wed at 15011000 {
    compatible = "mediatek,mt7986-wed","syscon";
    ....
};

> > +      wed1: wed at 1020a000 {


> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +      reserved-memory {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        wo_emi: wo-emi at 4fd00000 {
> > +          reg = <0 0x4fd00000 0 0x40000>;
> > +          no-map;
> > +        };
> > +
> > +        wo_data: wo-data at 4fd80000 {
> > +          reg = <0 0x4fd80000 0 0x240000>;
> > +          no-map;
> > +        };
> > +
> > +        wo_ilm: wo-ilm at 151e0000 {
> > +          reg = <0 0x151e0000 0 0x8000>;
> > +          no-map;
> > +        };
> > +      };
> 
> Don't need to show /reserved-memory in examples.

ack, I will fix it in v3.

> 
> > +
> > +      wo_boot: wo-boot at 15194000 {
> > +        compatible = "mediatek,mt7986-wo-boot","syscon";
> > +        reg = <0 0x15194000 0 0x1000>;
> > +      };
> > +
> > +      wo_ccif0: wo-ccif at 151a5000 {
> > +        compatible = "mediatek,mt7986-wo-ccif","syscon";
> > +        reg = <0 0x151a5000 0 0x1000>;
> > +        interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
> > +      };
> 
> Don't really need to show these either. You already have them in their 
> own schemas and we don't need 2 examples.
> 
> Didn't I already say this?

sorry, I missed it. I will fix it in v3.

Regards,
Lorenzo

> 
> > +
> > +      wo_dlm0: wo-dlm at 151e8000 {
> > +        compatible = "mediatek,mt7986-wo-dlm";
> > +        reg = <0 0x151e8000 0 0x2000>;
> > +        resets = <&ethsysrst 0>;
> > +        reset-names = "wocpu_rst";
> > +      };
> > +
> > +      wed1: wed at 1020a000 {
> > +        compatible = "mediatek,mt7986-wed","syscon";
> > +        reg = <0 0x15010000 0 0x1000>;
> > +        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +        memory-region = <&wo_emi>, <&wo_data>, <&wo_ilm>;
> > +        mediatek,wo-ccif = <&wo_ccif0>;
> > +        mediatek,wo-boot = <&wo_boot>;
> > +        mediatek,wo-dlm = <&wo_dlm0>;
> > +      };
> > +    };
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> > new file mode 100644
> > index 000000000000..ce9c971e6604
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-boot.yaml
> > @@ -0,0 +1,46 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-boot.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title:
> > +  MediaTek Wireless Ethernet Dispatch WO boot controller interface for MT7986
> > +
> > +maintainers:
> > +  - Lorenzo Bianconi <lorenzo at kernel.org>
> > +  - Felix Fietkau <nbd at nbd.name>
> > +
> > +description:
> > +  The mediatek wo-boot provides a configuration interface for WED WO
> > +  boot controller on MT7986 soc.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - mediatek,mt7986-wo-boot
> > +      - const: syscon
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +      wo_boot: wo-boot at 15194000 {
> > +        compatible = "mediatek,mt7986-wo-boot","syscon";
> > +        reg = <0 0x15194000 0 0x1000>;
> > +      };
> > +    };
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> > new file mode 100644
> > index 000000000000..48cb27bcc4cd
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-ccif.yaml
> > @@ -0,0 +1,49 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-ccif.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: MediaTek Wireless Ethernet Dispatch WO Controller for MT7986
> > +
> > +maintainers:
> > +  - Lorenzo Bianconi <lorenzo at kernel.org>
> > +  - Felix Fietkau <nbd at nbd.name>
> > +
> > +description:
> > +  The mediatek wo-ccif provides a configuration interface for WED WO
> > +  controller on MT7986 soc.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - mediatek,mt7986-wo-ccif
> > +      - const: syscon
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +      wo_ccif0: wo-ccif at 151a5000 {
> > +        compatible = "mediatek,mt7986-wo-ccif","syscon";
> > +        reg = <0 0x151a5000 0 0x1000>;
> > +        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> > +      };
> > +    };
> > diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
> > new file mode 100644
> > index 000000000000..db9252598a42
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wo-dlm.yaml
> > @@ -0,0 +1,50 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wo-dlm.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: MediaTek Wireless Ethernet Dispatch WO hw rx ring interface for MT7986
> > +
> > +maintainers:
> > +  - Lorenzo Bianconi <lorenzo at kernel.org>
> > +  - Felix Fietkau <nbd at nbd.name>
> > +
> > +description:
> > +  The mediatek wo-dlm provides a configuration interface for WED WO
> > +  rx ring on MT7986 soc.
> > +
> > +properties:
> > +  compatible:
> > +    const: mediatek,mt7986-wo-dlm
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  reset-names:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - resets
> > +  - reset-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      wo_dlm0: wo-dlm at 151e8000 {
> > +        compatible = "mediatek,mt7986-wo-dlm";
> > +        reg = <0 0x151e8000 0 0x2000>;
> > +        resets = <&ethsysrst 0>;
> > +        reset-names = "wocpu_rst";
> > +      };
> > +    };
> > -- 
> > 2.37.3
> > 
> > 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20221026/e7697550/attachment.sig>

More information about the Linux-mediatek mailing list