[PATCH v2] net: mtk_sgmii: implement mtk_pcs_ops
Russell King (Oracle)
linux at armlinux.org.uk
Mon Oct 24 07:56:50 PDT 2022
On Mon, Oct 24, 2022 at 04:45:40PM +0200, Frank Wunderlich wrote:
> Hi
> > Gesendet: Montag, 24. Oktober 2022 um 11:27 Uhr
> > Von: "Russell King (Oracle)" <linux at armlinux.org.uk>
>
> > Here's the combined patch for where I would like mtk_sgmii to get to.
> >
> > It looks like this PCS is similar to what we know as pcs-lynx.c, but
> > there do seem to be differences - the duplex bit for example appears
> > to be inverted.
> >
> > Please confirm whether this still works for you, thanks.
>
> basicly Patch works, but i get some (1-50) retransmitts on iperf3 on first interval in tx-mode (on r3 without -R), other 9 are clean. reverse mode is mostly clean.
> run iperf3 multiple times, every first interval has retransmitts. same for gmac0 (fixed-link 2500baseX)
>
> i notice that you have changed the timer again to 10000000 for 1000/2500baseX...maybe use here the default value too like the older code does?
You obviously missed my explanation. I will instead quote the 802.3
standard which covers 1000base-X:
37.3.1.4 Timers
link_timer
Timer used to ensure Auto-Negotiation protocol stability and
register read/write by the management interface.
Duration: 10 ms, tolerance +10 ms, –0 s.
For SGMII, the situation is different. Here is what the SGMII
specification says:
The link_timer inside the Auto-Negotiation has been changed from 10
msec to 1.6 msec to ensure a prompt update of the link status.
So, 10ms is correct for 1000base-X, and 1.6ms correct for SGMII.
However, feel free to check whether changing it solves that issue, but
also check whether it could be some ARP related issue - remember, if
two endpoints haven't communicated, they need to ARP to get the other
end's ethernet addresses which adds extra latency, and may result in
some packet loss in high packet queuing rate situations.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
More information about the Linux-mediatek
mailing list