[PATCH 2/2] dt-bindings: iio: adc: mediatek,mt2701-auxadc: new 32k clock

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Fri Oct 21 01:10:40 PDT 2022


Il 20/10/22 21:30, Daniel Golle ha scritto:
> On Thu, Oct 20, 2022 at 10:28:02AM +0200, AngeloGioacchino Del Regno wrote:
>> Il 19/10/22 16:38, Daniel Golle ha scritto:
>>> Newer MediaTek SoCs need an additional clock to be brought up for
>>> AUXADC to work. Add this new optional clock to
>>> mediatek,mt2701-auxadc.yaml.
>>>
>>> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
>>> ---
>>>    .../bindings/iio/adc/mediatek,mt2701-auxadc.yaml          | 8 ++++++--
>>>    1 file changed, 6 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
>>> index 7f79a06e76f596..c2a1813dd54152 100644
>>> --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
>>> +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
>>> @@ -44,10 +44,14 @@ properties:
>>>        maxItems: 1
>>>      clocks:
>>> -    maxItems: 1
>>> +    maxItems: 2
>>> +    minItems: 1
>>>      clock-names:
>>> -    const: main
>>> +    items:
>>> +      - const: main
>>> +      - const: 32k
>>
>> You're adding this for MT7986, and I don't see any 32KHz ADC clock on that SoC.
>> I suppose that your '32k' clock is CLK_INFRA_ADC_FRC_CK, currently parented to
>> 'csw_f26m_sel', so that's 26MHz, not 32KHz.
>>
>> Since you'll need the same changes for thermal as well, I would consider setting
>> "infra_adc_frc" as a parent of "infra_adc_26m", like so:
>>
>> 	GATE_INFRA1(CLK_INFRA_ADC_26M_CK, "infra_adc_26m", "infra_adc_frc", 20),
>> 	GATE_INFRA1(CLK_INFRA_ADC_FRC_CK, "infra_adc_frc", "csw_f26m_sel", 21),
>>
>> ...just because there's apparently no reason to have one of them enabled but not
>> the other or, at least, it looks like we *always* need ADC_26M_CK enabled when
>> ADC_FRC_CK is enabled.
>>
> 
> Yes, this change is for MT7986 and MT7981, immitating the behavior
> found in MediaTek's SDK sources. Embedding the dependency into the
> clock driver as you have suggested should also be possible as it is
> true that you always need them both and a similar change for the
> thermal driver would be needed as well.
> 
> Unless you were planning to do so already I will send a patch with your
> suggested change to drivers/clk/mediatek/clk-mt7986-infracfg.c.
> In any case, this series can be dropped then.
> 
> Thank you for the review!
> 
> 

You're welcome. Nice job sending the clock commit.

For the maintainers:
This series can be abandoned, as that clock dependency was fixed elsewhere.

Regards,
Angelo





More information about the Linux-mediatek mailing list