[PATCH] arm64: dts: mt8195: Add Ethernet controller

Biao Huang biao.huang at mediatek.com
Mon Oct 17 23:37:54 PDT 2022 

Dear Krzysztof,
	Thanks for your comments!

On Mon, 2022-10-17 at 22:01 -0400, Krzysztof Kozlowski wrote:
> On 17/10/2022 05:58, Biao Huang wrote:
> > Add Ethernet controller node for mt8195.
> > 
> > Signed-off-by: Biao Huang <biao.huang at mediatek.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 88
> > ++++++++++++++++++++
> >  arch/arm64/boot/dts/mediatek/mt8195.dtsi     | 87
> > +++++++++++++++++++
> >  2 files changed, 175 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> > b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> > index 4fbd99eb496a..02e04f82a4ae 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
> > @@ -258,6 +258,72 @@ &mt6359_vsram_others_ldo_reg {
> >  };
> >  
> >  &pio {
> > +	eth_default: eth_default {
> 
> No underscores in node names. Please also be sure your patch does not
> bring new warnings with `dtbs_check` (lack of suffix above could mean
> it
> brings...)
OK, I'll fix the underscores issue in next send.
As to "lack of suffix" issue, do you mean I should write it like:
	eth-default: eth-default at 0 {
		...
	}
If yes, other nodes in current file don't have such suffix.
e.g.
	gpio_keys_pins: gpio-keys-pins

Should I keep unified style with other nodes?
> 
> > +		txd_pins {
> 
> No underscores
OK, will fix in next send.
> 
> > +			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
> > +				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
> > +				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
> > +				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
> > +			drive-strength = <MTK_DRIVE_8mA>;
> > +		};
> > +		cc_pins {
> 
> Ditto... and so on.
OK, will fix in next send.
> 
> > +			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
> > +				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
> > +				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
> > +				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
> > +			drive-strength = <MTK_DRIVE_8mA>;
> > +		};
> > +		rxd_pins {
> > +			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
> > +				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
> > +				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
> > +				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
> > +		};
> > +		mdio_pins {
> > +			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
> > +				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
> > +			input-enable;
> > +		};
> > +		power_pins {
> > +			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
> > +				 <PINMUX_GPIO92__FUNC_GPIO92>;
> > +			output-high;
> > +		};
> > +	};
> > +
> > +	eth_sleep: eth_sleep {
> > +		txd_pins {
> > +			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
> > +				 <PINMUX_GPIO78__FUNC_GPIO78>,
> > +				 <PINMUX_GPIO79__FUNC_GPIO79>,
> > +				 <PINMUX_GPIO80__FUNC_GPIO80>;
> > +		};
> > +		cc_pins {
> > +			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
> > +				 <PINMUX_GPIO88__FUNC_GPIO88>,
> > +				 <PINMUX_GPIO87__FUNC_GPIO87>,
> > +				 <PINMUX_GPIO86__FUNC_GPIO86>;
> > +		};
> > +		rxd_pins {
> > +			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
> > +				 <PINMUX_GPIO82__FUNC_GPIO82>,
> > +				 <PINMUX_GPIO83__FUNC_GPIO83>,
> > +				 <PINMUX_GPIO84__FUNC_GPIO84>;
> > +		};
> > +		mdio_pins {
> > +			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
> > +				 <PINMUX_GPIO90__FUNC_GPIO90>;
> > +			input-disable;
> > +			bias-disable;
> > +		};
> > +		power_pins {
> > +			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
> > +				 <PINMUX_GPIO92__FUNC_GPIO92>;
> > +			input-disable;
> > +			bias-disable;
> > +		};
> > +	};
> > +
> >  	gpio_keys_pins: gpio-keys-pins {
> >  		pins {
> >  			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
> > @@ -434,6 +500,28 @@ &xhci0 {
> >  	status = "okay";
> >  };
> >  
> > +&eth {
> > +	phy-mode ="rgmii-rxid";
> > +	phy-handle = <&eth_phy0>;
> > +	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
> > +	snps,reset-delays-us = <0 10000 10000>;
> > +	mediatek,tx-delay-ps = <2030>;
> > +	pinctrl-names = "default", "sleep";
> > +	pinctrl-0 = <&eth_default>;
> > +	pinctrl-1 = <&eth_sleep>;
> > +	status = "okay";
> > +
> > +	mdio {
> > +		compatible = "snps,dwmac-mdio";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +		eth_phy0: eth_phy0 at 1 {
> 
> ethernet-phy at 1
OK, will modify in next send.
> 
> > +			compatible = "ethernet-phy-id001c.c916";
> > +			reg = <0x1>;
> > +		};
> > +	};
> > +};
> > +
> >  &xhci1 {
> >  	vusb33-supply = <&mt6359_vusb_ldo_reg>;
> >  	status = "okay";
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > index 905d1a90b406..aa1fcc3b9cb6 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > @@ -1042,6 +1042,93 @@ spis1: spi at 1101e000 {
> >  			status = "disabled";
> >  		};
> >  
> > +		stmmac_axi_setup: stmmac-axi-config {
> > +			snps,wr_osr_lmt = <0x7>;
> > +			snps,rd_osr_lmt = <0x7>;
> > +			snps,blen = <0 0 0 0 16 8 4>;
> > +		};
> > +
> > +		mtl_rx_setup: rx-queues-config {
> > +			snps,rx-queues-to-use = <4>;
> > +			snps,rx-sched-sp;
> > +			queue0 {
> > +				snps,dcb-algorithm;
> > +				snps,map-to-dma-channel = <0x0>;
> > +			};
> > +			queue1 {
> > +				snps,dcb-algorithm;
> > +				snps,map-to-dma-channel = <0x0>;
> > +			};
> > +			queue2 {
> > +				snps,dcb-algorithm;
> > +				snps,map-to-dma-channel = <0x0>;
> > +			};
> > +			queue3 {
> > +				snps,dcb-algorithm;
> > +				snps,map-to-dma-channel = <0x0>;
> > +			};
> > +		};
> > +
> > +		mtl_tx_setup: tx-queues-config {
> > +			snps,tx-queues-to-use = <4>;
> > +			snps,tx-sched-wrr;
> > +			queue0 {
> > +				snps,weight = <0x10>;
> > +				snps,dcb-algorithm;
> > +				snps,priority = <0x0>;
> > +			};
> > +			queue1 {
> > +				snps,weight = <0x11>;
> > +				snps,dcb-algorithm;
> > +				snps,priority = <0x1>;
> > +			};
> > +			queue2 {
> > +				snps,weight = <0x12>;
> > +				snps,dcb-algorithm;
> > +				snps,priority = <0x2>;
> > +			};
> > +			queue3 {
> > +				snps,weight = <0x13>;
> > +				snps,dcb-algorithm;
> > +				snps,priority = <0x3>;
> > +			};
> > +		};
> > +
> > +		eth: ethernet at 11021000 {
> > +			compatible = "mediatek,mt8195-gmac",
> > "snps,dwmac-5.10a";
> > +			reg = <0 0x11021000 0 0x4000>;
> > +			interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH
> > 0>;
> > +			interrupt-names = "macirq";
> > +			mac-address = [00 55 7b b5 7d f7];
> 
> How is this property of a SoC? Are you saying now that all MT8195
> SoCs
> have the same MAC address?
The mac-address here is taken as a default mac address in eth driver
rather than a randome one.
Actually, there will be a tool to customize eth mac address (e.g
through "ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx"), so every
MT8195 SoCs will get their specified mac address in real product.
> 
> Best regards,
> Krzysztof
> 
Best Regards!
Biao

More information about the Linux-mediatek mailing list