[PATCH v3 02/10] gpiolib: of: consolidate simple renames into a single quirk
Dmitry Torokhov
dmitry.torokhov at gmail.com
Mon Oct 17 22:41:03 PDT 2022
This consolidates all quirks doing simple renames (either allowing
suffix-less names or trivial renames, when index changes are not
required) into a single quirk.
Reviewed-by: Daniel Thompson <daniel.thompson at linaro.org>
Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
---
drivers/gpio/gpiolib-of.c | 183 ++++++++++++++++++----------------------------
1 file changed, 71 insertions(+), 112 deletions(-)
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index cef4f6634125..63c6fa3086f3 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -365,127 +365,90 @@ struct gpio_desc *gpiod_get_from_of_node(const struct device_node *node,
}
EXPORT_SYMBOL_GPL(gpiod_get_from_of_node);
-/*
- * The SPI GPIO bindings happened before we managed to establish that GPIO
- * properties should be named "foo-gpios" so we have this special kludge for
- * them.
- */
-static struct gpio_desc *of_find_spi_gpio(struct device_node *np,
- const char *con_id,
- unsigned int idx,
- enum of_gpio_flags *of_flags)
-{
- char prop_name[32]; /* 32 is max size of property name */
-
- /*
- * Hopefully the compiler stubs the rest of the function if this
- * is false.
- */
- if (!IS_ENABLED(CONFIG_SPI_MASTER))
- return ERR_PTR(-ENOENT);
-
- /* Allow this specifically for "spi-gpio" devices */
- if (!of_device_is_compatible(np, "spi-gpio") || !con_id)
- return ERR_PTR(-ENOENT);
-
- /* Will be "gpio-sck", "gpio-mosi" or "gpio-miso" */
- snprintf(prop_name, sizeof(prop_name), "%s-%s", "gpio", con_id);
-
- return of_get_named_gpiod_flags(np, prop_name, idx, of_flags);
-}
-
-/*
- * The old Freescale bindings use simply "gpios" as name for the chip select
- * lines rather than "cs-gpios" like all other SPI hardware. Account for this
- * with a special quirk.
- */
-static struct gpio_desc *of_find_spi_cs_gpio(struct device_node *np,
+static struct gpio_desc *of_find_gpio_rename(struct device_node *np,
const char *con_id,
unsigned int idx,
enum of_gpio_flags *of_flags)
{
- if (!IS_ENABLED(CONFIG_SPI_MASTER))
- return ERR_PTR(-ENOENT);
-
- /* Allow this specifically for Freescale and PPC devices */
- if (!of_device_is_compatible(np, "fsl,spi") &&
- !of_device_is_compatible(np, "aeroflexgaisler,spictrl") &&
- !of_device_is_compatible(np, "ibm,ppc4xx-spi"))
- return ERR_PTR(-ENOENT);
- /* Allow only if asking for "cs-gpios" */
- if (!con_id || strcmp(con_id, "cs"))
- return ERR_PTR(-ENOENT);
+ static const struct of_rename_gpio {
+ const char *con_id;
+ const char *legacy_id; /* NULL - same as con_id */
+ /*
+ * Compatible string can be set to NULL in case where
+ * matching to a particular compatible is not practical,
+ * but it should only be done for gpio names that have
+ * vendor prefix to reduce risk of false positives.
+ * Addition of such entries is strongly discouraged.
+ */
+ const char *compatible;
+ } gpios[] = {
+#if IS_ENABLED(CONFIG_MFD_ARIZONA)
+ { "wlf,reset", NULL, NULL },
+#endif
+#if IS_ENABLED(CONFIG_REGULATOR)
+ /*
+ * Some regulator bindings happened before we managed to
+ * establish that GPIO properties should be named
+ * "foo-gpios" so we have this special kludge for them.
+ */
+ { "wlf,ldoena", NULL, NULL }, /* Arizona */
+ { "wlf,ldo1ena", NULL, NULL }, /* WM8994 */
+ { "wlf,ldo2ena", NULL, NULL }, /* WM8994 */
+#endif
+#if IS_ENABLED(CONFIG_SPI_MASTER)
- /*
- * While all other SPI controllers use "cs-gpios" the Freescale
- * uses just "gpios" so translate to that when "cs-gpios" is
- * requested.
- */
- return of_get_named_gpiod_flags(np, "gpios", idx, of_flags);
-}
+ /*
+ * The SPI GPIO bindings happened before we managed to
+ * establish that GPIO properties should be named
+ * "foo-gpios" so we have this special kludge for them.
+ */
+ { "miso", "gpio-miso", "spi-gpio" },
+ { "mosi", "gpio-mosi", "spi-gpio" },
+ { "sck", "gpio-sck", "spi-gpio" },
-/*
- * Some regulator bindings happened before we managed to establish that GPIO
- * properties should be named "foo-gpios" so we have this special kludge for
- * them.
- */
-static struct gpio_desc *of_find_regulator_gpio(struct device_node *np,
- const char *con_id,
- unsigned int idx,
- enum of_gpio_flags *of_flags)
-{
- /* These are the connection IDs we accept as legacy GPIO phandles */
- const char *whitelist[] = {
- "wlf,ldoena", /* Arizona */
- "wlf,ldo1ena", /* WM8994 */
- "wlf,ldo2ena", /* WM8994 */
+ /*
+ * The old Freescale bindings use simply "gpios" as name
+ * for the chip select lines rather than "cs-gpios" like
+ * all other SPI hardware. Allow this specifically for
+ * Freescale and PPC devices.
+ */
+ { "cs", "gpios", "fsl,spi" },
+ { "cs", "gpios", "aeroflexgaisler,spictrl" },
+ { "cs", "gpios", "ibm,ppc4xx-spi" },
+#endif
+#if IS_ENABLED(CONFIG_TYPEC_FUSB302)
+ /*
+ * Fairchild FUSB302 host is using undocumented "fcs,int_n"
+ * property without the compulsory "-gpios" suffix.
+ */
+ { "fcs,int_n", NULL, "fcs,fusb302" },
+#endif
};
- int i;
-
- if (!IS_ENABLED(CONFIG_REGULATOR))
- return ERR_PTR(-ENOENT);
+ struct gpio_desc *desc;
+ const char *legacy_id;
+ unsigned int i;
if (!con_id)
return ERR_PTR(-ENOENT);
- i = match_string(whitelist, ARRAY_SIZE(whitelist), con_id);
- if (i < 0)
- return ERR_PTR(-ENOENT);
-
- return of_get_named_gpiod_flags(np, con_id, idx, of_flags);
-}
-
-static struct gpio_desc *of_find_arizona_gpio(struct device_node *np,
- const char *con_id,
- unsigned int idx,
- enum of_gpio_flags *of_flags)
-{
- if (!IS_ENABLED(CONFIG_MFD_ARIZONA))
- return ERR_PTR(-ENOENT);
-
- if (!con_id || strcmp(con_id, "wlf,reset"))
- return ERR_PTR(-ENOENT);
-
- return of_get_named_gpiod_flags(np, con_id, idx, of_flags);
-}
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ if (strcmp(con_id, gpios[i].con_id))
+ continue;
-static struct gpio_desc *of_find_usb_gpio(struct device_node *np,
- const char *con_id,
- unsigned int idx,
- enum of_gpio_flags *of_flags)
-{
- /*
- * Currently this USB quirk is only for the Fairchild FUSB302 host
- * which is using an undocumented DT GPIO line named "fcs,int_n"
- * without the compulsory "-gpios" suffix.
- */
- if (!IS_ENABLED(CONFIG_TYPEC_FUSB302))
- return ERR_PTR(-ENOENT);
+ if (gpios[i].compatible &&
+ !of_device_is_compatible(np, gpios[i].compatible))
+ continue;
- if (!con_id || strcmp(con_id, "fcs,int_n"))
- return ERR_PTR(-ENOENT);
+ legacy_id = gpios[i].legacy_id ?: gpios[i].con_id;
+ desc = of_get_named_gpiod_flags(np, legacy_id, idx, of_flags);
+ if (!gpiod_not_found(desc)) {
+ pr_info("%s uses legacy gpio name '%s' instead of '%s-gpios'\n",
+ of_node_full_name(np), legacy_id, con_id);
+ return desc;
+ }
+ }
- return of_get_named_gpiod_flags(np, con_id, idx, of_flags);
+ return ERR_PTR(-ENOENT);
}
static struct gpio_desc *of_find_mt2701_gpio(struct device_node *np,
@@ -525,11 +488,7 @@ typedef struct gpio_desc *(*of_find_gpio_quirk)(struct device_node *np,
unsigned int idx,
enum of_gpio_flags *of_flags);
static const of_find_gpio_quirk of_find_gpio_quirks[] = {
- of_find_spi_gpio,
- of_find_spi_cs_gpio,
- of_find_regulator_gpio,
- of_find_arizona_gpio,
- of_find_usb_gpio,
+ of_find_gpio_rename,
of_find_mt2701_gpio,
NULL
};
--
b4 0.11.0-dev-5166b
More information about the Linux-mediatek
mailing list