[PATCH v2] clk: mediatek: clk-mux: Add .determine_rate() callback
Maxime Ripard
maxime at cerno.tech
Thu Oct 13 01:25:04 PDT 2022
Hi
Thanks again for testing, it's very appreciated
On Thu, Oct 13, 2022 at 10:13:04AM +0200, AngeloGioacchino Del Regno wrote:
> Il 13/10/22 09:19, Maxime Ripard ha scritto:
> > On Thu, Oct 13, 2022 at 12:52:41AM +0800, Chen-Yu Tsai wrote:
> > > On Thu, Oct 13, 2022 at 12:42 AM Maxime Ripard <maxime at cerno.tech> wrote:
> > > >
> > > > On Wed, Oct 12, 2022 at 03:56:19PM +0200, Maxime Ripard wrote:
> > > > > On Wed, Oct 12, 2022 at 02:14:39PM +0200, AngeloGioacchino Del Regno wrote:
> > > > > > Il 12/10/22 13:48, Maxime Ripard ha scritto:
> > > > > > > On Wed, Oct 12, 2022 at 11:57:15AM +0200, AngeloGioacchino Del Regno wrote:
> > > > > > > > Il 12/10/22 11:40, Maxime Ripard ha scritto:
> > > > > > > > > On Wed, Oct 12, 2022 at 11:09:59AM +0200, AngeloGioacchino Del Regno wrote:
> > > > > > > > > > Il 12/10/22 10:55, Maxime Ripard ha scritto:
> > > > > > > > > > > Hi,
> > > > > > > > > > >
> > > > > > > > > > > On Tue, Oct 11, 2022 at 03:55:48PM +0200, AngeloGioacchino Del Regno wrote:
> > > > > > > > > > > > Since commit 262ca38f4b6e ("clk: Stop forwarding clk_rate_requests
> > > > > > > > > > > > to the parent"), the clk_rate_request is .. as the title says, not
> > > > > > > > > > > > forwarded anymore to the parent:
> > > > > > > > > > >
> > > > > > > > > > > It's not entirely true, the rate request should still be forwarded, but
> > > > > > > > > > > we don't pass the same instance of clk_rate_request anymore.
> > > > > > > > > > >
> > > > > > > > > > > > this produces an issue with the MediaTek clock MUX driver during GPU
> > > > > > > > > > > > DVFS on MT8195, but not on MT8192 or others.
> > > > > > > > > > > >
> > > > > > > > > > > > This is because, differently from others, like MT8192 where all of
> > > > > > > > > > > > the clocks in the MFG parents tree are of mtk_mux type, but in the
> > > > > > > > > > > > parent tree of MT8195's MFG clock, we have one mtk_mux clock and
> > > > > > > > > > > > one (clk framework generic) mux clock, like so:
> > > > > > > > > > > >
> > > > > > > > > > > > names: mfg_bg3d -> mfg_ck_fast_ref -> top_mfg_core_tmp (or) mfgpll
> > > > > > > > > > > > types: mtk_gate -> mux -> mtk_mux (or) mtk_pll
> > > > > > > > > > > >
> > > > > > > > > > > > To solve this issue and also keep the GPU DVFS clocks code working
> > > > > > > > > > > > as expected, wire up a .determine_rate() callback for the mtk_mux
> > > > > > > > > > > > ops; for that, the standard clk_mux_determine_rate_flags() was used
> > > > > > > > > > > > as it was possible to.
> > > > > > > > > > >
> > > > > > > > > > > It probably fixes things indeed, but I'm a bit worried that it just
> > > > > > > > > > > works around the actual issue instead of fixing the actual bug...
> > > > > > > > > > >
> > > > > > > > > > > > This commit was successfully tested on MT6795 Xperia M5, MT8173 Elm,
> > > > > > > > > > > > MT8192 Spherion and MT8195 Tomato; no regressions were seen.
> > > > > > > > > > > >
> > > > > > > > > > > > For the sake of some more documentation about this issue here's the
> > > > > > > > > > > > trace of it:
> > > > > > > > > > > >
> > > > > > > > > > > > [ 12.211587] ------------[ cut here ]------------
> > > > > > > > > > > > [ 12.211589] WARNING: CPU: 6 PID: 78 at drivers/clk/clk.c:1462 clk_core_init_rate_req+0x84/0x90
> > > > > > > > > > > > [ 12.211593] Modules linked in: stp crct10dif_ce mtk_adsp_common llc rfkill snd_sof_xtensa_dsp
> > > > > > > > > > > > panfrost(+) sbs_battery cros_ec_lid_angle cros_ec_sensors snd_sof_of
> > > > > > > > > > > > cros_ec_sensors_core hid_multitouch cros_usbpd_logger snd_sof gpu_sched
> > > > > > > > > > > > snd_sof_utils fuse ipv6
> > > > > > > > > > > > [ 12.211614] CPU: 6 PID: 78 Comm: kworker/u16:2 Tainted: G W 6.0.0-next-20221011+ #58
> > > > > > > > > > > > [ 12.211616] Hardware name: Acer Tomato (rev2) board (DT)
> > > > > > > > > > > > [ 12.211617] Workqueue: devfreq_wq devfreq_monitor
> > > > > > > > > > > > [ 12.211620] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > > > > > > > > > > > [ 12.211622] pc : clk_core_init_rate_req+0x84/0x90
> > > > > > > > > > > > [ 12.211625] lr : clk_core_forward_rate_req+0xa4/0xe4
> > > > > > > > > > > > [ 12.211627] sp : ffff80000893b8e0
> > > > > > > > > > > > [ 12.211628] x29: ffff80000893b8e0 x28: ffffdddf92f9b000 x27: ffff46a2c0e8bc05
> > > > > > > > > > > > [ 12.211632] x26: ffff46a2c1041200 x25: 0000000000000000 x24: 00000000173eed80
> > > > > > > > > > > > [ 12.211636] x23: ffff80000893b9c0 x22: ffff80000893b940 x21: 0000000000000000
> > > > > > > > > > > > [ 12.211641] x20: ffff46a2c1039f00 x19: ffff46a2c1039f00 x18: 0000000000000000
> > > > > > > > > > > > [ 12.211645] x17: 0000000000000038 x16: 000000000000d904 x15: 0000000000000003
> > > > > > > > > > > > [ 12.211649] x14: ffffdddf9357ce48 x13: ffffdddf935e71c8 x12: 000000000004803c
> > > > > > > > > > > > [ 12.211653] x11: 00000000a867d7ad x10: 00000000a867d7ad x9 : ffffdddf90c28df4
> > > > > > > > > > > > [ 12.211657] x8 : ffffdddf9357a980 x7 : 0000000000000000 x6 : 0000000000000004
> > > > > > > > > > > > [ 12.211661] x5 : ffffffffffffffc8 x4 : 00000000173eed80 x3 : ffff80000893b940
> > > > > > > > > > > > [ 12.211665] x2 : 00000000173eed80 x1 : ffff80000893b940 x0 : 0000000000000000
> > > > > > > > > > > > [ 12.211669] Call trace:
> > > > > > > > > > > > [ 12.211670] clk_core_init_rate_req+0x84/0x90
> > > > > > > > > > > > [ 12.211673] clk_core_round_rate_nolock+0xe8/0x10c
> > > > > > > > > > > > [ 12.211675] clk_mux_determine_rate_flags+0x174/0x1f0
> > > > > > > > > > > > [ 12.211677] clk_mux_determine_rate+0x1c/0x30
> > > > > > > > > > > > [ 12.211680] clk_core_determine_round_nolock+0x74/0x130
> > > > > > > > > > > > [ 12.211682] clk_core_round_rate_nolock+0x58/0x10c
> > > > > > > > > > > > [ 12.211684] clk_core_round_rate_nolock+0xf4/0x10c
> > > > > > > > > > > > [ 12.211686] clk_core_set_rate_nolock+0x194/0x2ac
> > > > > > > > > > > > [ 12.211688] clk_set_rate+0x40/0x94
> > > > > > > > > > > > [ 12.211691] _opp_config_clk_single+0x38/0xa0
> > > > > > > > > > > > [ 12.211693] _set_opp+0x1b0/0x500
> > > > > > > > > > > > [ 12.211695] dev_pm_opp_set_rate+0x120/0x290
> > > > > > > > > > > > [ 12.211697] panfrost_devfreq_target+0x3c/0x50 [panfrost]
> > > > > > > > > > > > [ 12.211705] devfreq_set_target+0x8c/0x2d0
> > > > > > > > > > > > [ 12.211707] devfreq_update_target+0xcc/0xf4
> > > > > > > > > > > > [ 12.211708] devfreq_monitor+0x40/0x1d0
> > > > > > > > > > > > [ 12.211710] process_one_work+0x294/0x664
> > > > > > > > > > > > [ 12.211712] worker_thread+0x7c/0x45c
> > > > > > > > > > > > [ 12.211713] kthread+0x104/0x110
> > > > > > > > > > > > [ 12.211716] ret_from_fork+0x10/0x20
> > > > > > > > > > > > [ 12.211718] irq event stamp: 7102
> > > > > > > > > > > > [ 12.211719] hardirqs last enabled at (7101): [<ffffdddf904ea5a0>] finish_task_switch.isra.0+0xec/0x2f0
> > > > > > > > > > > > [ 12.211723] hardirqs last disabled at (7102): [<ffffdddf91794b74>] el1_dbg+0x24/0x90
> > > > > > > > > > > > [ 12.211726] softirqs last enabled at (6716): [<ffffdddf90410be4>] __do_softirq+0x414/0x588
> > > > > > > > > > > > [ 12.211728] softirqs last disabled at (6507): [<ffffdddf904171d8>] ____do_softirq+0x18/0x24
> > > > > > > > > > > > [ 12.211730] ---[ end trace 0000000000000000 ]---
> > > > > > > > > > >
> > > > > > > > > > > ... Indeed, you shouldn't hit that warning at all. It happens in
> > > > > > > > > > > clk_core_round_rate_nolock, which takes (before your patch) the
> > > > > > > > > > > CLK_SET_RATE_PARENT branch. This indeed has been changed by the patch
> > > > > > > > > > > you mentioned, and will call clk_core_forward_rate_req() now, that in
> > > > > > > > > > > turn calls clk_core_init_rate_nolock().
> > > > > > > > > > >
> > > > > > > > > > > I think the warning you hit is because core->parent is NULL, which is
> > > > > > > > > > > passed to clk_core_forward_rate_req() as the parent argument, and we'll
> > > > > > > > > > > call clk_core_init_rate_req() with parent set as the core argument.
> > > > > > > > > > >
> > > > > > > > > > > In clk_core_init_rate_req(), the first thing we do is a WARN_ON(!core),
> > > > > > > > > > > which is what you hit here I think.
> > > > > > > > > > >
> > > > > > > > > > > This is different to the previous behavior that was calling
> > > > > > > > > > > clk_core_round_rate_nolock() with core->parent directly, and
> > > > > > > > > > > clk_core_round_rate_nolock() if its core argument is NULL will set
> > > > > > > > > > > req->rate to 0 and bail out without returning an error.
> > > > > > > > > > >
> > > > > > > > > > > Now, your patch probably works because now that you provide a
> > > > > > > > > > > determine_rate implementation, clk_core_can_round() returns true and
> > > > > > > > > > > you'll take a different branch in clk_core_round_rate_nolock(), avoiding
> > > > > > > > > > > that issue entirely.
> > > > > > > > > > >
> > > > > > > > > > > Does that patch work better (on top of next-20221012)?
> > > > > > > > > >
> > > > > > > > > > I admit I didn't go too deep in the research, as my brain processed that as
> > > > > > > > > > "this is a mux clock, not really different from a standard mux, this callback
> > > > > > > > > > is missing, that's not optimal"... then that fixed it and called it a day.
> > > > > > > > > >
> > > > > > > > > > I should've prolonged my research for a better understanding of what was
> > > > > > > > > > actually going on.
> > > > > > > > >
> > > > > > > > > No worries :)
> > > > > > > > >
> > > > > > > > > > What you said actually opened my mind and, with little surprise, your patch
> > > > > > > > > > works as good as mine - no warnings and the clock scales as expected!
> > > > > > > > >
> > > > > > > > > I'm actually wondering if you didn't encounter two issues. What kernel
> > > > > > > > > were you testing before? If it's older than today's next
> > > > > > > > > (next-20221012), you're likely missing
> > > > > > > > >
> > > > > > > >
> > > > > > > > I was testing next-20221011.
> > > > > > > >
> > > > > > > > > https://lore.kernel.org/linux-clk/20221010-rpi-clk-fixes-again-v1-0-d87ba82ac404@cerno.tech/
> > > > > > > > >
> > > > > > > > > Which is likely to be what fixed the clock scaling. And my patch only
> > > > > > > > > fixed the warning. Could you test next-20221012? If I'm right, you
> > > > > > > > > should only get the warning.
> > > > > > > > >
> > > > > > > >
> > > > > > > > No, I am getting the same situation even after rebasing over next-20221012, without
> > > > > > > > any of the two patches (determine_rate() for mtk mux, nor the one you shared for
> > > > > > > > clk.c), when the warning happens, I get very slow GPU operation and the same "nice"
> > > > > > > > timeout:
> > > > > > > >
> > > > > > > > [ 27.785514] panfrost 13000000.gpu: gpu sched timeout, js=1,
> > > > > > > > config=0x7b00, status=0x0, head=0xa1cb180, tail=0xa1cb180,
> > > > > > > > sched_job=00000000f07d39e3
> > > > > > > >
> > > > > > > > ...so I'm not encountering the same issue that you've fixed with the patches that
> > > > > > > > got merged in next-20221012.
> > > > > > > >
> > > > > > > > Of course, as you were expecting, the warning is also still there and still
> > > > > > > > the same:
> > > > > > > >
> > > > > > > > [ 27.750504] WARNING: CPU: 4 PID: 164 at drivers/clk/clk.c:1462
> > > > > > > > clk_core_init_rate_req+0x84/0x90
> > > > > > >
> > > > > > > Ok. I'm still a bit unsure why it actually fixes anything.
> > > > > > >
> > > > > > > In the current next, clk_core_init_rate_req (through
> > > > > > > clk_core_forward_rate_req) will bail out right away, but the patch will
> > > > > > > clear the request and set the requested rate.
> > > > > > >
> > > > > > > I don't think the req->rate assignment changes anything because our next
> > > > > > > call will be to clk_core_round_rate_nolock that will clear it in the
> > > > > > > !core path, but it might just be that we don't initialize the request
> > > > > > > and end up with some garbage data in it?
> > > > > > >
> > > > > > > Could you test, on top of next-20221012,
> > > > > >
> > > > > > No that's not the case, this patch has no effect at all (yes I've tested it).
> > > > >
> > > > > Ok. Too bad. I've tried to build a test case that was reproducing what
> > > > > you experience, but I don't seem to be able to build one for now.
> > > > >
> > > > > If we go back to your previous explanation on the clock tree, and what
> > > > > we discussed then, there's still something a bit puzzling.
> > > > >
> > > > > You were saying that are calling clk_set_rate on mfg_bg3d, which is a
> > > > > mtk_gate, registered with mtk_clk_register_gate(), and with the
> > > > > mtk_clk_gate_ops_setclr clk_ops. There's no determine_rate / round_rate
> > > > > implementation which makes sense for a gate, and CLK_SET_RATE_PARENT is
> > > > > set by mtk_clk_register_gate(). Everything's good.
> > > > >
> > > > > The clk_set_rate call will thus be forwarded to its parent,
> > > > > mfg_ck_fast_ref, which is a mux, registered with
> > > > > devm_clk_hw_register_mux(), with CLK_SET_RATE_PARENT as well. Makes
> > > > > sense too, any clk_set_rate() call will thus evaluate all of the
> > > > > mfg_ck_fast_ref parents and will either adjust the rate of a parent, or
> > > > > reparent.
> > > > >
> > > > > mfg_ck_fast_ref then has two parents, top_mfg_core_tmp and mfgpll.
> > > > > Judging from your patch, top_mfg_core_tmp is being used.
> > > > > top_mfg_core_tmp is a mtk_mux, registered by mtk_clk_register_mux()
> > > > > (through mtk_clk_register_muxes()), and using
> > > > > mtk_mux_gate_clr_set_upd_ops. CLK_SET_RATE_PARENT is set by
> > > > > mtk_clk_register_mux(). That flag still makes sense for a mux. However,
> > > > > it's really not clear to me how a mux operates without a determine_rate
> > > > > implementation to forward the rates to each of its parents.
> > > > >
> > > > > It looks like we were relying before on the fact that the request was
> > > > > indeed forwarded as is to the current parent. It looks like the parent
> > > > > was not registered at all (core->parent being NULL), and then it was
> > > > > working because of $REASON, possibly one of the muxes preferred to
> > > > > switch to some other clock source.
> > > > >
> > > > > I think we need to address this in multiple ways:
> > > > >
> > > > > - If you have ftrace enabled on that platform, running with "tp_printk
> > > > > trace_event=clk:*" in the kernel command line on a failing kernel would
> > > > > be great, so that we can figure out what is happening exactly.
> > > >
> > > > I spent more time trying to create a setup similar to yours but couldn't
> > > > find anything obviously wrong. In addition to the above, could you start
> > > > a faulty kernel with that patch:
> > > >
> > > > diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> > > > index 884a58a98b6b..774953901a35 100644
> > > > --- a/drivers/clk/clk.c
> > > > +++ b/drivers/clk/clk.c
> > > > @@ -262,6 +262,9 @@ EXPORT_SYMBOL_GPL(__clk_get_name);
> > > >
> > > > const char *clk_hw_get_name(const struct clk_hw *hw)
> > > > {
> > > > + if (!hw || !hw->core)
> > > > + return "(null)";
> > > > +
> > > > return hw->core->name;
> > > > }
> > > > EXPORT_SYMBOL_GPL(clk_hw_get_name);
> > > > @@ -1471,6 +1474,17 @@ static bool clk_core_can_round(struct clk_core * const core)
> > > > return core->ops->determine_rate || core->ops->round_rate;
> > > > }
> > > >
> > > > +static void clk_core_request_dump(const struct clk_core *core,
> > > > + const struct clk_rate_request *req)
> > > > +{
> > > > + pr_crit("%s\n", core ? core->name : "(null)");
> > > > + pr_crit("\trate %lu\n", req->rate);
> > > > + pr_crit("\tmin %lu, max %lu\n", req->min_rate, req->max_rate);
> > > > + pr_crit("\tbest parent %s, rate %lu\n",
> > > > + clk_hw_get_name(req->best_parent_hw),
> > > > + req->best_parent_rate);
> > > > +}
> > > > +
> > > > static int clk_core_round_rate_nolock(struct clk_core *core,
> > > > struct clk_rate_request *req)
> > > > {
> > > > @@ -2254,8 +2268,12 @@ static unsigned long clk_core_req_round_rate_nolock(struct clk_core *core,
> > > >
> > > > clk_core_init_rate_req(core, &req, req_rate);
> > > >
> > > > + clk_core_request_dump(core, &req);
> > > > +
> > > > ret = clk_core_round_rate_nolock(core, &req);
> > > >
> > > > + clk_core_request_dump(core, &req);
> > > > +
> > > > /* restore the protection */
> > > > clk_core_rate_restore_protect(core, cnt);
> > > >
> > > >
> > > > Alternatively, can I easily get a MT8195 device to test more easily?
> > >
> > > The Acer Spin Chromebook 513, specifically CP513-2H, should be available
> > > on Amazon in both the US and UK. No idea about France though. And it's
> > > quite pricey.
> >
> > Thanks, but I was more expecting some kind of SBC, and it's a bit too
> > expensive for me indeed :/
> >
>
> Yeah that's the one - and it's exactly the device that I'm using here.
>
> Btw, I will avoid pasting the same trace over and over again and skip to
> the output that you added with the patch.
>
> [ 11.447922] panfrost 13000000.gpu: clock rate = 699999695
> [ 11.453402] panfrost 13000000.gpu: Looking up mali-supply from device tree
> [ 11.461842] mfg_bg3d
> [ 11.471067] rate 700000000
> [ 11.473857] min 0, max 18446744073709551615
> [ 11.478123] best parent mfg_ck_fast_ref, rate 699999695
>
> ...
>
> [ 11.826631] mfg_bg3d
> [ 11.829249] rate 699999695
> [ 11.832472] min 0, max 18446744073709551615
> [ 11.837159] best parent mfg_ck_fast_ref, rate 699999695
>
> ...
>
> [ 12.190365] mfg_bg3d
> [ 12.198676] rate 390000000
> [ 12.206494] min 0, max 18446744073709551615
> [ 12.236155] best parent mfg_ck_fast_ref, rate 699999695
>
> ...
>
> [ 12.592687] mfg_bg3d
> [ 12.592693] rate 390000000
> [ 12.592698] min 0, max 18446744073709551615
> [ 12.592702] best parent mfg_ck_fast_ref, rate 390000000
Yeah, so it all seems to make sense. The parent is still the same, and
the rate is equal or close enough.
It would be interesting to get the traces after the second
clk_core_request_dump() call to see what the CCF is doing, because
there's probably some difference there. Could you enable the traces like
I pointed above, and paste them with and without the patch?
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20221013/6a0f5a03/attachment-0001.sig>
More information about the Linux-mediatek
mailing list