[PATCH v3] arm64: dts: mt8173: Fix elm panel DT node

[Pin-yen Lin]

Friendly ping again on this thread.

On Mon, Jul 25, 2022 at 4:25 PM Pin-yen Lin <treapking at chromium.org> wrote:
>
> Hi Matthias.
>
> Gentle ping on this thread. Any feedback or suggestions?
>
> Regards,
> Pin-yen
>
> On Mon, Jul 11, 2022 at 11:09 AM Pin-yen Lin <treapking at chromium.org> wrote:
> >
> > All we know is that the functions mentioned in the commit message were
> > working in 4.19 kernel, but not in the latest kernel tree.
> >
> > Unfortunately, we don't know which patch breaks the driver.
> >
> > Best regards,
> > Pin-yen
> >
> > On Thu, Jul 7, 2022 at 10:50 PM Matthias Brugger <matthias.bgg at gmail.com> wrote:
> > >
> > >
> > >
> > > On 21/06/2022 11:18, Pin-Yen Lin wrote:
> > > > Move the panel DT node under `aux-bus` node, so it won't use the buggy
> > > > `ps8640_bridge_get_edid` to get the display modes. Also, change the
> > > > compatible string from "lg,lp120up1" to "edp-panel", so the panel-edp
> > > > driver gets the displays modes from the EDID instead of using the
> > > > predefined display mode (`lg_lp129qe_mode`) in the driver, which is
> > > > actually not working.
> > > >
> > >
> > > Do we need a fixes tag here? I'm not quite sure if we fix an upstream bug here,
> > > to be honest.
> > >
> > > Regards,
> > > Matthias
> > >
> > > > Signed-off-by: Pin-Yen Lin <treapking at chromium.org>
> > > > ---
> > > >
> > > > Changes in v3:
> > > > - Include more details in the commit message.
> > > >
> > > > Changes in v2:
> > > > - Remove the Fixes tag because this change is not compatible with the
> > > >    old kernel versions.
> > > >
> > > >   arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 26 +++++++++++---------
> > > >   1 file changed, 14 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > > > index 9c75fbb31f98..1e0802a6f6d2 100644
> > > > --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > > > @@ -90,18 +90,6 @@ volume_up {
> > > >               };
> > > >       };
> > > >
> > > > -     panel: panel {
> > > > -             compatible = "lg,lp120up1";
> > > > -             power-supply = <&panel_fixed_3v3>;
> > > > -             backlight = <&backlight>;
> > > > -
> > > > -             port {
> > > > -                     panel_in: endpoint {
> > > > -                             remote-endpoint = <&ps8640_out>;
> > > > -                     };
> > > > -             };
> > > > -     };
> > > > -
> > > >       panel_fixed_3v3: regulator1 {
> > > >               compatible = "regulator-fixed";
> > > >               regulator-name = "PANEL_3V3";
> > > > @@ -282,6 +270,20 @@ ps8640_out: endpoint {
> > > >                               };
> > > >                       };
> > > >               };
> > > > +
> > > > +             aux-bus {
> > > > +                     panel {
> > > > +                             compatible = "edp-panel";
> > > > +                             power-supply = <&panel_fixed_3v3>;
> > > > +                             backlight = <&backlight>;
> > > > +
> > > > +                             port {
> > > > +                                     panel_in: endpoint {
> > > > +                                             remote-endpoint = <&ps8640_out>;
> > > > +                                     };
> > > > +                             };
> > > > +                     };
> > > > +             };
> > > >       };
> > > >   };
> > > >