[PATCH 3/7] gpiolib: of: add quirk for locating reset lines with legacy bindings

Dmitry Torokhov dmitry.torokhov at gmail.com
Tue Oct 11 15:19:31 PDT 2022


Some legacy mappings used "gpio[s]-reset" instead of "reset-gpios",
add a quirk so that gpiod API will still work on unmodified DTSes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
---
 drivers/gpio/gpiolib-of.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 619aae0c5476..576f2f0c3432 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -375,9 +375,18 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np,
 		const char *legacy_id;	/* NULL - same as con_id */
 		const char *compatible; /* NULL - don't check */
 	} gpios[] = {
+#if !IS_ENABLED(CONFIG_LCD_HX8357)
+		/* Himax LCD controllers used "gpios-reset" */
+		{ "reset",	"gpios-reset",	"himax,hx8357" },
+		{ "reset",	"gpios-reset",	"himax,hx8369" },
+#endif
 #if IS_ENABLED(CONFIG_MFD_ARIZONA)
 		{ "wlf,reset",	NULL,		NULL },
 #endif
+#if !IS_ENABLED(CONFIG_PCI_LANTIQ)
+		/* MIPS Lantiq PCI */
+		{ "reset",	"gpios-reset",	"lantiq,pci-xway" },
+#endif
 #if IS_ENABLED(CONFIG_REGULATOR)
 		/*
 		 * Some regulator bindings happened before we managed to
@@ -388,8 +397,14 @@ static struct gpio_desc *of_find_gpio_rename(struct device_node *np,
 		{ "wlf,ldo1ena", NULL,		NULL }, /* WM8994 */
 		{ "wlf,ldo2ena", NULL,		NULL }, /* WM8994 */
 #endif
+#if IS_ENABLED(CONFIG_SND_SOC_TLV320AIC3X)
+		{ "reset",	"gpio-reset",	"ti,tlv320aic3x" },
+		{ "reset",	"gpio-reset",	"ti,tlv320aic33" },
+		{ "reset",	"gpio-reset",	"ti,tlv320aic3007" },
+		{ "reset",	"gpio-reset",	"ti,tlv320aic3104" },
+		{ "reset",	"gpio-reset",	"ti,tlv320aic3106" },
+#endif
 #if IS_ENABLED(CONFIG_SPI_MASTER)
-
 		/*
 		 * The SPI GPIO bindings happened before we managed to
 		 * establish that GPIO properties should be named

-- 
b4 0.11.0-dev-5166b



More information about the Linux-mediatek mailing list