[PATCH v3 2/2] phy: mediatek: tphy: add debugfs files
Chunfeng Yun
chunfeng.yun at mediatek.com
Thu Oct 6 07:43:31 PDT 2022
These debugfs files are mainly used to make eye diagram test easier,
especially helpful to do HQA test for a new IC without efuse enabled.
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v3: fix typo of "debugfs" suggested by AngeloGioacchino
v2: add CONFIG_PHY_MTK_TPHY_DEBUGFS suggested by AngeloGioacchino
---
drivers/phy/mediatek/Kconfig | 5 +
drivers/phy/mediatek/phy-mtk-tphy.c | 403 +++++++++++++++++++++++++++-
2 files changed, 407 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 3125ecb5d119..e9fdfe9f519f 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -27,6 +27,11 @@ config PHY_MTK_TPHY
multi-ports is first version, otherwise is second version,
so you can easily distinguish them by banks layout.
+config PHY_MTK_TPHY_DEBUGFS
+ bool "Add T-PHY Debugfs Files"
+ help
+ Say Y here to add debugfs files mainly for T-PHY HQA test.
+
config PHY_MTK_UFS
tristate "MediaTek UFS M-PHY driver"
depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index e906a82791bd..99677665a9c4 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -7,6 +7,7 @@
#include <dt-bindings/phy/phy.h>
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
@@ -264,6 +265,8 @@
#define TPHY_CLKS_CNT 2
+#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
+
enum mtk_phy_version {
MTK_PHY_V1 = 1,
MTK_PHY_V2,
@@ -310,6 +313,7 @@ struct mtk_phy_instance {
struct clk_bulk_data clks[TPHY_CLKS_CNT];
u32 index;
u32 type;
+ struct dentry *dbgfs;
struct regmap *type_sw;
u32 type_sw_reg;
u32 type_sw_index;
@@ -332,10 +336,389 @@ struct mtk_tphy {
const struct mtk_phy_pdata *pdata;
struct mtk_phy_instance **phys;
int nphys;
+ struct dentry *dbgfs_root;
int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
int src_coef; /* coefficient for slew rate calibrate */
};
+#if IS_ENABLED(CONFIG_PHY_MTK_TPHY_DEBUGFS)
+
+enum u2_phy_params {
+ U2P_EYE_VRT = 0,
+ U2P_EYE_TERM,
+ U2P_EFUSE_EN,
+ U2P_EFUSE_INTR,
+ U2P_DISCTH,
+ U2P_PRE_EMPHASIS,
+};
+
+enum u3_phy_params {
+ U3P_EFUSE_EN = 0,
+ U3P_EFUSE_INTR,
+ U3P_EFUSE_TX_IMP,
+ U3P_EFUSE_RX_IMP,
+};
+
+static const char *const u2_phy_files[] = {
+ [U2P_EYE_VRT] = "vrt",
+ [U2P_EYE_TERM] = "term",
+ [U2P_EFUSE_EN] = "efuse",
+ [U2P_EFUSE_INTR] = "intr",
+ [U2P_DISCTH] = "discth",
+ [U2P_PRE_EMPHASIS] = "preemph",
+};
+
+static const char *const u3_phy_files[] = {
+ [U3P_EFUSE_EN] = "efuse",
+ [U3P_EFUSE_INTR] = "intr",
+ [U3P_EFUSE_TX_IMP] = "tx-imp",
+ [U3P_EFUSE_RX_IMP] = "rx-imp",
+};
+
+static int u2_phy_params_show(struct seq_file *sf, void *unused)
+{
+ struct mtk_phy_instance *inst = sf->private;
+ const char *fname = file_dentry(sf->file)->d_iname;
+ struct u2phy_banks *u2_banks = &inst->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 max = 0;
+ u32 tmp = 0;
+ u32 val = 0;
+ int ret;
+
+ ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+ if (ret < 0)
+ return ret;
+
+ switch (ret) {
+ case U2P_EYE_VRT:
+ tmp = readl(com + U3P_USBPHYACR1);
+ val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
+ max = FIELD_MAX(PA1_RG_VRT_SEL);
+ break;
+
+ case U2P_EYE_TERM:
+ tmp = readl(com + U3P_USBPHYACR1);
+ val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
+ max = FIELD_MAX(PA1_RG_TERM_SEL);
+ break;
+
+ case U2P_EFUSE_EN:
+ if (u2_banks->misc) {
+ tmp = readl(u2_banks->misc + U3P_MISC_REG1);
+ max = 1;
+ }
+
+ val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
+ break;
+
+ case U2P_EFUSE_INTR:
+ tmp = readl(com + U3P_USBPHYACR1);
+ val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
+ max = FIELD_MAX(PA1_RG_INTR_CAL);
+ break;
+
+ case U2P_DISCTH:
+ tmp = readl(com + U3P_USBPHYACR6);
+ val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
+ max = FIELD_MAX(PA6_RG_U2_DISCTH);
+ break;
+
+ case U2P_PRE_EMPHASIS:
+ tmp = readl(com + U3P_USBPHYACR6);
+ val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
+ max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
+ break;
+
+ default:
+ seq_printf(sf, "invalid, %d\n", ret);
+ break;
+ }
+
+ seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+ return 0;
+}
+
+static int u2_phy_params_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, u2_phy_params_show, inode->i_private);
+}
+
+static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ const char *fname = file_dentry(file)->d_iname;
+ struct seq_file *sf = file->private_data;
+ struct mtk_phy_instance *inst = sf->private;
+ struct u2phy_banks *u2_banks = &inst->u2_banks;
+ void __iomem *com = u2_banks->com;
+ ssize_t rc;
+ u32 val;
+ int ret;
+
+ rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+ if (rc)
+ return rc;
+
+ ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+ if (ret < 0)
+ return (ssize_t)ret;
+
+ switch (ret) {
+ case U2P_EYE_VRT:
+ mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val);
+ break;
+
+ case U2P_EYE_TERM:
+ mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val);
+ break;
+
+ case U2P_EFUSE_EN:
+ if (u2_banks->misc)
+ mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1,
+ MR1_EFUSE_AUTO_LOAD_DIS, !!val);
+ break;
+
+ case U2P_EFUSE_INTR:
+ mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val);
+ break;
+
+ case U2P_DISCTH:
+ mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val);
+ break;
+
+ case U2P_PRE_EMPHASIS:
+ mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val);
+ break;
+
+ default:
+ break;
+ }
+
+ return count;
+}
+
+static const struct file_operations u2_phy_fops = {
+ .open = u2_phy_params_open,
+ .write = u2_phy_params_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+ u32 count = ARRAY_SIZE(u2_phy_files);
+ int i;
+
+ for (i = 0; i < count; i++)
+ debugfs_create_file(u2_phy_files[i], 0644, inst->dbgfs, inst, &u2_phy_fops);
+}
+
+static int u3_phy_params_show(struct seq_file *sf, void *unused)
+{
+ struct mtk_phy_instance *inst = sf->private;
+ const char *fname = file_dentry(sf->file)->d_iname;
+ struct u3phy_banks *u3_banks = &inst->u3_banks;
+ u32 val, tmp, max;
+ int ret;
+
+ ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+ if (ret < 0)
+ return ret;
+
+ switch (ret) {
+ case U3P_EFUSE_EN:
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
+ val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
+ max = 1;
+ break;
+
+ case U3P_EFUSE_INTR:
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+ val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
+ max = FIELD_MAX(P3A_RG_IEXT_INTR);
+ break;
+
+ case U3P_EFUSE_TX_IMP:
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+ val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
+ max = FIELD_MAX(P3D_RG_TX_IMPEL);
+ break;
+
+ case U3P_EFUSE_RX_IMP:
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+ val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
+ max = FIELD_MAX(P3D_RG_RX_IMPEL);
+ break;
+
+ default:
+ seq_printf(sf, "invalid, %d\n", ret);
+ break;
+ }
+
+ seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+ return 0;
+}
+
+static int u3_phy_params_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, u3_phy_params_show, inode->i_private);
+}
+
+static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ const char *fname = file_dentry(file)->d_iname;
+ struct seq_file *sf = file->private_data;
+ struct mtk_phy_instance *inst = sf->private;
+ struct u3phy_banks *u3_banks = &inst->u3_banks;
+ void __iomem *phyd = u3_banks->phyd;
+ ssize_t rc;
+ u32 val;
+ int ret;
+
+ rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+ if (rc)
+ return rc;
+
+ ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+ if (ret < 0)
+ return (ssize_t)ret;
+
+ switch (ret) {
+ case U3P_EFUSE_EN:
+ mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
+ P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val);
+ break;
+
+ case U3P_EFUSE_INTR:
+ mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR, val);
+ break;
+
+ case U3P_EFUSE_TX_IMP:
+ mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val);
+ mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
+ break;
+
+ case U3P_EFUSE_RX_IMP:
+ mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val);
+ mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
+ break;
+
+ default:
+ break;
+ }
+
+ return count;
+}
+
+static const struct file_operations u3_phy_fops = {
+ .open = u3_phy_params_open,
+ .write = u3_phy_params_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+ u32 count = ARRAY_SIZE(u3_phy_files);
+ int i;
+
+ for (i = 0; i < count; i++)
+ debugfs_create_file(u3_phy_files[i], 0644, inst->dbgfs, inst, &u3_phy_fops);
+}
+
+static int tphy_type_show(struct seq_file *sf, void *unused)
+{
+ struct mtk_phy_instance *inst = sf->private;
+ const char *type;
+
+ switch (inst->type) {
+ case PHY_TYPE_USB2:
+ type = "USB2";
+ break;
+ case PHY_TYPE_USB3:
+ type = "USB3";
+ break;
+ case PHY_TYPE_PCIE:
+ type = "PCIe";
+ break;
+ case PHY_TYPE_SGMII:
+ type = "SGMII";
+ break;
+ case PHY_TYPE_SATA:
+ type = "SATA";
+ break;
+ default:
+ type = "";
+ }
+
+ seq_printf(sf, "%s\n", type);
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(tphy_type);
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{
+ char name[16];
+
+ snprintf(name, sizeof(name) - 1, "phy.%d", inst->index);
+ inst->dbgfs = debugfs_create_dir(name, tphy->dbgfs_root);
+
+ debugfs_create_file("type", 0444, inst->dbgfs, inst, &tphy_type_fops);
+
+ switch (inst->type) {
+ case PHY_TYPE_USB2:
+ u2_phy_dbgfs_files_create(inst);
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ u3_phy_dbgfs_files_create(inst);
+ break;
+ default:
+ break;
+ }
+}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{
+ debugfs_remove_recursive(inst->dbgfs);
+ inst->dbgfs = NULL;
+}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{
+ tphy->dbgfs_root = debugfs_create_dir(dev_name(tphy->dev), phy_debug_root);
+}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{
+ debugfs_remove_recursive(tphy->dbgfs_root);
+ tphy->dbgfs_root = NULL;
+}
+
+#else
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{}
+
+#endif
+
static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
@@ -1032,6 +1415,8 @@ static int mtk_phy_init(struct phy *phy)
return -EINVAL;
}
+ tphy_debugfs_init(tphy, instance);
+
return 0;
}
@@ -1068,6 +1453,8 @@ static int mtk_phy_exit(struct phy *phy)
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+ tphy_debugfs_exit(instance);
+
if (instance->type == PHY_TYPE_USB2)
u2_phy_instance_exit(tphy, instance);
@@ -1295,15 +1682,29 @@ static int mtk_tphy_probe(struct platform_device *pdev)
}
provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
+ if (IS_ERR(provider))
+ return dev_err_probe(dev, PTR_ERR(provider), "probe failed\n");
+
+ tphy_debugfs_root_create(tphy);
+ return 0;
- return PTR_ERR_OR_ZERO(provider);
put_child:
of_node_put(child_np);
return retval;
}
+static int mtk_tphy_remove(struct platform_device *pdev)
+{
+ struct mtk_tphy *tphy;
+
+ tphy = platform_get_drvdata(pdev);
+ tphy_debugfs_root_remove(tphy);
+ return 0;
+}
+
static struct platform_driver mtk_tphy_driver = {
.probe = mtk_tphy_probe,
+ .remove = mtk_tphy_remove,
.driver = {
.name = "mtk-tphy",
.of_match_table = mtk_tphy_id_table,
--
2.18.0
More information about the Linux-mediatek
mailing list