[PATCH v8, 3/4] mailbox: mtk-cmdq: add gce ddr enable support flow

[AngeloGioacchino Del Regno]

Il 30/09/22 18:06, Yongqiang Niu ha scritto:
> add gce ddr enable control flow when gce suspend/resume
> 
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> ---
>   drivers/mailbox/mtk-cmdq-mailbox.c | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 04eb44d89119..2db82ff838ed 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -94,6 +94,18 @@ struct gce_plat {
>   	u32 gce_num;
>   };
>   
> +static void cmdq_sw_ddr_enable(struct cmdq *cmdq, bool enable)
> +{
> +	WARN_ON(clk_bulk_enable(cmdq->gce_num, cmdq->clocks));
> +
> +	if (enable)
> +		writel(GCE_DDR_EN | GCE_CTRL_BY_SW, cmdq->base + GCE_GCTL_VALUE);

My only concern here is about the previous value stored in the GCE_GCTL_VALUE
register, as you're overwriting it in its entirety with
GCE_DDR_EN | GCE_CTRL_BY_SW.

Can you guarantee that this register is not pre-initialized with some value,
and that these are the only bits to be `1` in this register?

Otherwise, you will have to readl and modify the bits instead... by the way,
if this register doesn't get any changes during runtime, you may cache it
at probe time to avoid reading it for every suspend/resume operation.

Regards,
Angelo