[PATCH 1/5] wifi: mt76: mt7915: fix scene detection flow of spatial reuse

[Ryder Lee]

Firmware is in the driving seat while sr_scene_detect is enabled,
so driver needs to skip operation to avoid mangling scene detection
algorithm.

Fixes: a633503 ("wifi: mt76: mt7915: add support to configure spatial reuse parameter set")
Signed-off-by: Ryder Lee <ryder.lee at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 9e479d41eab5..718e52744994 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -3535,22 +3535,22 @@ int mt7915_mcu_add_obss_spr(struct mt7915_phy *phy, struct ieee80211_vif *vif,
 	if (ret)
 		return ret;
 
+	/* firmware dynamically adjusts PD threshold so skip manual control */
+	if (sr_scene_detect && !he_obss_pd->enable)
+		return 0;
+
 	/* enable spatial reuse */
 	ret = mt7915_mcu_enable_obss_spr(phy, SPR_ENABLE, he_obss_pd->enable);
 	if (ret)
 		return ret;
 
-	if (!he_obss_pd->enable)
+	if (sr_scene_detect || !he_obss_pd->enable)
 		return 0;
 
 	ret = mt7915_mcu_enable_obss_spr(phy, SPR_ENABLE_TX, true);
 	if (ret)
 		return ret;
 
-	/* firmware dynamically adjusts PD threshold so skip manual control */
-	if (sr_scene_detect)
-		return 0;
-
 	/* set SRG/non-SRG OBSS PD threshold */
 	ret = mt7915_mcu_set_obss_spr_pd(phy, he_obss_pd);
 	if (ret)
-- 
2.18.0