[PATCH] wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host

[Deren Wu]

SDIO may need addtional 512 bytes to align bus operation. If the tailroom
of this skb is not big enough, we would access invalid memory region.
For low level operation, take xmit_buf instead of skb to keep valid memory
access in SDIO.
Note: xmit_buf is big enough for single skb size

Error message:
[69.951] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0xe9/0x1a0
[69.951] Read of size 64 at addr ffff88811c9cf000 by task kworker/u16:7/451
[69.951] CPU: 4 PID: 451 Comm: kworker/u16:7 Tainted: G W  OE  6.1.0-rc5 #1
[69.951] Workqueue: kvub300c vub300_cmndwork_thread [vub300]
[69.951] Call Trace:
[69.951]  <TASK>
[69.952]  dump_stack_lvl+0x49/0x63
[69.952]  print_report+0x171/0x4a8
[69.952]  kasan_report+0xb4/0x130
[69.952]  kasan_check_range+0x149/0x1e0
[69.952]  memcpy+0x24/0x70
[69.952]  sg_copy_buffer+0xe9/0x1a0
[69.952]  sg_copy_to_buffer+0x12/0x20
[69.952]  __command_write_data.isra.0+0x23c/0xbf0 [vub300]
[69.952]  vub300_cmndwork_thread+0x17f3/0x58b0 [vub300]
[69.952]  process_one_work+0x7ee/0x1320
[69.952]  worker_thread+0x53c/0x1240
[69.952]  kthread+0x2b8/0x370
[69.952]  ret_from_fork+0x1f/0x30
[69.952]  </TASK>

[69.952] Allocated by task 854:
[69.952]  kasan_save_stack+0x26/0x50
[69.952]  kasan_set_track+0x25/0x30
[69.952]  kasan_save_alloc_info+0x1b/0x30
[69.952]  __kasan_kmalloc+0x87/0xa0
[69.952]  __kmalloc_node_track_caller+0x63/0x150
[69.952]  kmalloc_reserve+0x31/0xd0
[69.952]  __alloc_skb+0xfc/0x2b0
[69.952]  __mt76_mcu_msg_alloc+0xbf/0x230 [mt76]
[69.952]  mt76_mcu_send_and_get_msg+0xab/0x110 [mt76]
[69.952]  __mt76_mcu_send_firmware.cold+0x94/0x15d [mt76]
[69.952]  mt76_connac_mcu_send_ram_firmware+0x415/0x54d [mt76_connac_lib]
[69.952]  mt76_connac2_load_ram.cold+0x118/0x4bc [mt76_connac_lib]
[69.952]  mt7921_run_firmware.cold+0x2e9/0x405 [mt7921_common]
[69.952]  mt7921s_mcu_init+0x45/0x80 [mt7921s]
[69.953]  mt7921_init_work+0xe1/0x2a0 [mt7921_common]
[69.953]  process_one_work+0x7ee/0x1320
[69.953]  worker_thread+0x53c/0x1240
[69.953]  kthread+0x2b8/0x370
[69.953]  ret_from_fork+0x1f/0x30
[69.953] The buggy address belongs to the object at ffff88811c9ce800
             which belongs to the cache kmalloc-2k of size 2048
[69.953] The buggy address is located 0 bytes to the right of
             2048-byte region [ffff88811c9ce800, ffff88811c9cf000)

[69.953] Memory state around the buggy address:
[69.953]  ffff88811c9cef00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[69.953]  ffff88811c9cef80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[69.953] >ffff88811c9cf000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69.953]                    ^
[69.953]  ffff88811c9cf080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69.953]  ffff88811c9cf100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 764dee47e2c1 ("mt76: sdio: move common code in mt76_sdio module")
Tested-by: YN Chen <YN.Chen at mediatek.com>
Signed-off-by: Deren Wu <deren.wu at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/sdio_txrx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
index bfc4de50a4d2..ebea5c4e8da5 100644
--- a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
@@ -254,7 +254,8 @@ static int mt76s_tx_run_queue(struct mt76_dev *dev, struct mt76_queue *q)
 
 		if (!test_bit(MT76_STATE_MCU_RUNNING, &dev->phy.state)) {
 			__skb_put_zero(e->skb, 4);
-			err = __mt76s_xmit_queue(dev, e->skb->data,
+			memcpy(sdio->xmit_buf, e->skb->data, e->skb->len);
+			err = __mt76s_xmit_queue(dev, sdio->xmit_buf,
 						 e->skb->len);
 			if (err)
 				return err;
-- 
2.18.0