[PATCH] mips: ralink: mt7621: fix phy-mode of external phy on GB-PC2

[Arınç ÜNAL]

The phy-mode property must be defined on the MAC instead of the PHY. Define
phy-mode under gmac1 which the external phy is connected to.

Tested-by: Petr Louda <petr.louda at outlook.cz>
Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
 arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
index 7515555388ae..e31417569e09 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
@@ -113,13 +113,13 @@ &pcie {
 
 &gmac1 {
 	status = "okay";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy5>;
 };
 
 &mdio {
 	ethphy5: ethernet-phy at 5 {
 		reg = <5>;
-		phy-mode = "rgmii-rxid";
 	};
 };
 
-- 
2.34.1