[PATCH] wifi: mt76: mt7915: add wds support when wed is enabled
Sujuan Chen (陈素娟)
Sujuan.Chen at mediatek.com
Tue Nov 22 02:03:45 PST 2022
On Mon, 2022-11-21 at 14:29 +0100, Lorenzo Bianconi wrote:
> > The current WED only supports 256 wcid, whereas mt7986 can support
> > up to 512 entries,
> > so firmware provides a rule to get sta_info by DA when wcid is set
> > to 0x3ff by txd.
> > Also, WED provides a register to overwrite txd wcid, that is,
> > wcid[9:8] can
> > be overwritten by 0x3 and wcid[7:0] is set to 0xff by host driver.
> >
> > However, firmware is unable to get sta_info from DA as DA != RA for
> > 4addr cases,
> > so firmware and wifi host driver both use wcid (256 - 271) and (768
> > ~ 783)
> > for sync up to get correct sta_info
> >
> > Tested-by: Sujuan Chen <sujuan.chen at mediatek.com>
> > Co-developed-by: Bo Jiao <bo.jiao at mediatek.com>
> > Signed-off-by: Bo Jiao <bo.jiao at mediatek.com>
> > Signed-off-by: Sujuan Chen <sujuan.chen at mediatek.com>
> > ---
> > This patch is based on
> >
https://patchwork.kernel.org/project/linux-mediatek/list/?series=697444
> > ---
> > drivers/net/wireless/mediatek/mt76/mt76.h | 6 +++
> > .../net/wireless/mediatek/mt76/mt7603/main.c | 2 +-
> > .../net/wireless/mediatek/mt76/mt7615/main.c | 2 +-
> > .../wireless/mediatek/mt76/mt7615/pci_init.c | 2 +-
> > .../wireless/mediatek/mt76/mt7615/usb_sdio.c | 2 +-
> > .../net/wireless/mediatek/mt76/mt76x02_util.c | 2 +-
> > .../net/wireless/mediatek/mt76/mt7915/init.c | 2 +-
> > .../net/wireless/mediatek/mt76/mt7915/main.c | 24 +++++++++--
> > .../net/wireless/mediatek/mt76/mt7915/mcu.c | 11 ++++-
> > .../net/wireless/mediatek/mt76/mt7915/mcu.h | 1 +
> > .../net/wireless/mediatek/mt76/mt7915/mmio.c | 3 ++
> > .../net/wireless/mediatek/mt76/mt7921/init.c | 2 +-
> > .../net/wireless/mediatek/mt76/mt7921/main.c | 2 +-
> > .../net/wireless/mediatek/mt76/mt7996/init.c | 2 +-
> > .../net/wireless/mediatek/mt76/mt7996/main.c | 2 +-
> > drivers/net/wireless/mediatek/mt76/util.c | 42
> > ++++++++++++++++++-
> > drivers/net/wireless/mediatek/mt76/util.h | 2 +-
> > 17 files changed, 91 insertions(+), 18 deletions(-)
> >
>
> Hi Sujuan,
>
> I took just a brief look at the patch, but I think you can
> significantly
> reduce the patch size doing something like:
>
> int __mt76_wcid_alloc(u32 *mask, int size, u8 flag)
> {
> ...
> }
>
> static inline int mt76_wcid_alloc(u32 *mask, int size)
> {
> return __mt76_wcid_alloc(, 0);
> }
>
Hi Lore,
ack, thanks. I will do it in v2.
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h
> > b/drivers/net/wireless/mediatek/mt76/mt76.h
> > index 33f87e518d68..1763b582c020 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> > +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> > @@ -38,6 +38,12 @@
> > #define MT_WED_Q_RX(_n) __MT_WED_Q(MT76_WED_Q_RX, _n)
> > #define MT_WED_Q_TXFREE __MT_WED_Q(MT76_WED_Q_TXFREE,
> > 0)
> >
> > +enum mt76_wed_state {
> > + MT76_WED_DISABLED,
> > + MT76_WED_ACTIVE,
> > + MT76_WED_WDS_ACTIVE,
> > +};
> > +
> > struct mt76_dev;
> > struct mt76_phy;
> > struct mt76_wcid;
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/main.c
> > b/drivers/net/wireless/mediatek/mt76/mt7603/main.c
> > index ca50feb0b3a9..d788bb59a113 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7603/main.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7603/main.c
> > @@ -347,7 +347,7 @@ mt7603_sta_add(struct mt76_dev *mdev, struct
> > ieee80211_vif *vif,
> > int idx;
> > int ret = 0;
> >
> > - idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7603_WTBL_STA -
> > 1);
> > + idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7603_WTBL_STA - 1,
> > 0);
> > if (idx < 0)
> > return -ENOSPC;
> >
>
> [...]
>
> > mt76_connac_mcu_wtbl_update_hdr_trans(&dev->mt76, vif, sta);
> > }
> >
> > @@ -1448,15 +1462,19 @@ mt7915_net_fill_forward_path(struct
> > ieee80211_hw *hw,
> > if (!mtk_wed_device_active(wed))
> > return -ENODEV;
> >
> > - if (msta->wcid.idx > 0xff)
> > + if (msta->wcid.idx > MT7915_WTBL_STA)
> > return -EIO;
> >
> > path->type = DEV_PATH_MTK_WDMA;
> > path->dev = ctx->dev;
> > path->mtk_wdma.wdma_idx = wed->wdma_idx;
> > path->mtk_wdma.bss = mvif->mt76.idx;
> > - path->mtk_wdma.wcid = is_mt7915(&dev->mt76) ? msta->wcid.idx :
> > 0x3ff;
> > path->mtk_wdma.queue = phy != &dev->phy;
> > + if (test_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags) ||
> > + is_mt7915(&dev->mt76))
> > + path->mtk_wdma.wcid = msta->wcid.idx;
> > + else
> > + path->mtk_wdma.wcid = 0x3ff;
> >
> > ctx->dev = NULL;
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > index 2769d6c897d9..aeeeff9b2143 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> > @@ -2303,8 +2303,15 @@ int mt7915_mcu_init_firmware(struct
> > mt7915_dev *dev)
> > if (ret)
> > return ret;
> >
> > - if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
> > is_mt7915(&dev->mt76))
> > - mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0,
> > 0, 0);
> > + if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
> > + if (is_mt7915(&dev->mt76))
> > + mt7915_mcu_wa_cmd(dev,
> > MCU_WA_PARAM_CMD(CAPABILITY),
> > + 0, 0, 0);
> > + else
> > + mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
> > + MCU_WA_PARAM_WED_VERSION,
> > + dev->mt76.mmio.wed.rev_id,
> > 0);
> > + }
>
> can you please honor mt7915_mcu_wa_cmd() returned value?
>
Ack.
> >
> > ret = mt7915_mcu_set_mwds(dev, 1);
> > if (ret)
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> > b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> > index c19b5d66c0e1..59e1ea35f77f 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> > @@ -260,6 +260,7 @@ enum {
> > MCU_WA_PARAM_PDMA_RX = 0x04,
> > MCU_WA_PARAM_CPU_UTIL = 0x0b,
> > MCU_WA_PARAM_RED = 0x0e,
> > + MCU_WA_PARAM_WED_VERSION = 0x32,
> > };
> >
> > enum mcu_mmps_mode {
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > index 1fcf34f57a16..d90793d082b8 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
> > @@ -773,6 +773,9 @@ int mt7915_mmio_wed_init(struct mt7915_dev
> > *dev, void *pdev_ptr,
> >
> > dev->mt76.rx_token_size = wed->wlan.rx_npkt;
> >
> > + if (!is_mt7915(&dev->mt76))
> > + wed->wlan.wcid_512 = true;
> > +
> > if (mtk_wed_device_attach(wed))
> > return 0;
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > index 79b8055ce4c4..702ff300f8f7 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > @@ -283,7 +283,7 @@ static int mt7921_init_wcid(struct mt7921_dev
> > *dev)
> > int idx;
> >
> > /* Beacon and mgmt frames should occupy wcid 0 */
> > - idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7921_WTBL_STA -
> > 1);
> > + idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7921_WTBL_STA - 1,
> > 0);
> > if (idx)
> > return -ENOSPC;
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > index 41df17efdb3a..3d8771fcb847 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > @@ -814,7 +814,7 @@ int mt7921_mac_sta_add(struct mt76_dev *mdev,
> > struct ieee80211_vif *vif,
> > struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
> > int ret, idx;
> >
> > - idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7921_WTBL_STA -
> > 1);
> > + idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7921_WTBL_STA - 1,
> > 0);
> > if (idx < 0)
> > return -ENOSPC;
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
> > b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
> > index cd1657e3585d..4cf055040519 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
> > @@ -433,7 +433,7 @@ static int mt7996_init_hardware(struct
> > mt7996_dev *dev)
> > return ret;
> >
> > /* Beacon and mgmt frames should occupy wcid 0 */
> > - idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7996_WTBL_STA);
> > + idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7996_WTBL_STA, 0);
> > if (idx)
> > return -ENOSPC;
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
> > b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
> > index 21dea3fa7dc1..fd40b515cc5b 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
> > @@ -579,7 +579,7 @@ int mt7996_mac_sta_add(struct mt76_dev *mdev,
> > struct ieee80211_vif *vif,
> > u8 band_idx = mvif->phy->mt76->band_idx;
> > int ret, idx;
> >
> > - idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7996_WTBL_STA);
> > + idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7996_WTBL_STA, 0);
> > if (idx < 0)
> > return -ENOSPC;
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/util.c
> > b/drivers/net/wireless/mediatek/mt76/util.c
> > index 581964425468..0850149f4200 100644
> > --- a/drivers/net/wireless/mediatek/mt76/util.c
> > +++ b/drivers/net/wireless/mediatek/mt76/util.c
> > @@ -42,9 +42,14 @@ bool __mt76_poll_msec(struct mt76_dev *dev, u32
> > offset, u32 mask, u32 val,
> > }
> > EXPORT_SYMBOL_GPL(__mt76_poll_msec);
> >
> > -int mt76_wcid_alloc(u32 *mask, int size)
> > +int mt76_wcid_alloc(u32 *mask, int size, u8 flag)
> > {
> > +#define MT76_WED_WDS_MIN 256
> > +#define MT76_WED_WDS_CNT 16
> > +
> > int i, idx = 0, cur;
> > + int min = MT76_WED_WDS_MIN;
> > + int max = min + MT76_WED_WDS_CNT;
> >
> > for (i = 0; i < DIV_ROUND_UP(size, 32); i++) {
> > idx = ffs(~mask[i]);
> > @@ -53,13 +58,46 @@ int mt76_wcid_alloc(u32 *mask, int size)
> >
> > idx--;
> > cur = i * 32 + idx;
> > - if (cur >= size)
>
> I think it easier to understand the code if you run the code below
> just if wed
> is active, right?
>
> if (!mtk_wed_device_active())
> break;
>
mtk_wed_device_active() need mt76_dev to get wed.
!mtk_wed_device_active() is include in MT76_WED_DISABLED.
Would it be better to run if (!mtk_wed_device_active())?
Actually, the logic is a bit more complicated.
Using only mtk_wed_device_active() cannot cover all cases.
wcid(256~271) is special using for WDS when WED is enabled.
and wcid(256~271) will be used for normal sta when wcid(exclude
256~271) is run out.
I will change MT76_WED_DISABLED to MT76_WED_DEFAULT which includes
below situation:
(wed is disabled || beacon wcid(0))
is it ok?
> Regards,
> Lorenzo
>
> > +
> > + switch (flag) {
> > + case MT76_WED_DISABLED:
> > + if (cur >= size)
> > + goto error;
> > +
> > break;
> > + case MT76_WED_ACTIVE:
> > + if (cur >= min && cur < max)
> > + continue;
> > +
> > + if (cur >= size) {
> > + u32 end = MT76_WED_WDS_CNT - 1;
> > +
> > + i = min / 32;
> > + idx = ffs(~mask[i] & GENMASK(end, 0));
> > + if (!idx)
> > + goto error;
> > + idx--;
> > + cur = min + idx;
> > + }
> > +
> > + break;
> > + case MT76_WED_WDS_ACTIVE:
> > + if (cur < min)
> > + continue;
> > + if (cur >= max)
> > + goto error;
> > +
> > + break;
> > + default:
> > + WARN_ON(1);
> > + break;
> > + }
> >
> > mask[i] |= BIT(idx);
> > return cur;
> > }
> >
> > +error:
> > return -1;
> > }
> > EXPORT_SYMBOL_GPL(mt76_wcid_alloc);
> > diff --git a/drivers/net/wireless/mediatek/mt76/util.h
> > b/drivers/net/wireless/mediatek/mt76/util.h
> > index 260965dde94c..c72460e78389 100644
> > --- a/drivers/net/wireless/mediatek/mt76/util.h
> > +++ b/drivers/net/wireless/mediatek/mt76/util.h
> > @@ -27,7 +27,7 @@ enum {
> > #define MT76_INCR(_var, _size) \
> > (_var = (((_var) + 1) % (_size)))
> >
> > -int mt76_wcid_alloc(u32 *mask, int size);
> > +int mt76_wcid_alloc(u32 *mask, int size, u8 flag);
> >
> > static inline void
> > mt76_wcid_mask_set(u32 *mask, int idx)
> > --
> > 2.18.0
> >
More information about the Linux-mediatek
mailing list