[PATCH net-next 1/5] net: ethernet: mtk_wed: return status value in mtk_wdma_rx_reset

[Alexander Lobakin]

From: Lorenzo Bianconi <lorenzo at kernel.org>
Date: Mon, 21 Nov 2022 09:59:21 +0100

> Move MTK_WDMA_RESET_IDX configuration in mtk_wdma_rx_reset routine.
> This is a preliminary patch to add Wireless Ethernet Dispatcher reset
> support.
> 
> Co-developed-by: Sujuan Chen <sujuan.chen at mediatek.com>
> Signed-off-by: Sujuan Chen <sujuan.chen at mediatek.com>
> Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
> ---
>  drivers/net/ethernet/mediatek/mtk_wed.c | 25 ++++++++++++-------------
>  1 file changed, 12 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mediatek/mtk_wed.c b/drivers/net/ethernet/mediatek/mtk_wed.c
> index 7d8842378c2b..dc898ded2f05 100644
> --- a/drivers/net/ethernet/mediatek/mtk_wed.c
> +++ b/drivers/net/ethernet/mediatek/mtk_wed.c
> @@ -101,17 +101,21 @@ mtk_wdma_read_reset(struct mtk_wed_device *dev)
>  	return wdma_r32(dev, MTK_WDMA_GLO_CFG);
>  }
>  
> -static void
> +static int
>  mtk_wdma_rx_reset(struct mtk_wed_device *dev)
>  {
>  	u32 status, mask = MTK_WDMA_GLO_CFG_RX_DMA_BUSY;
> -	int i;
> +	int i, ret;
>  
>  	wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_RX_DMA_EN);
> -	if (readx_poll_timeout(mtk_wdma_read_reset, dev, status,
> -			       !(status & mask), 0, 1000))
> +	ret = readx_poll_timeout(mtk_wdma_read_reset, dev, status,
> +				 !(status & mask), 0, 10000);

You didn't mention anywhere this change of the timeout from 1000 to
10000, and for example for me it's not clear from the code why you
did this. Maybe leave a comment in the commitmsg?
Same in 2/5 for Tx, also 1000 -> 10000.

> +	if (ret)
>  		dev_err(dev->hw->dev, "rx reset failed\n");
>  
> +	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
> +	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
> +
>  	for (i = 0; i < ARRAY_SIZE(dev->rx_wdma); i++) {
>  		if (dev->rx_wdma[i].desc)
>  			continue;

[...]

> -- 
> 2.38.1

Thanks,
Olek