[PATCH v5 3/7] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Mon Nov 21 05:35:33 PST 2022
Il 18/11/22 12:30, Yassine Oudjana ha scritto:
> From: Yassine Oudjana <y.oudjana at protonmail.com>
>
> Combine MT6795 pin controller document into MT6779 one. In the
> process, amend the example with comments and additional pinctrl
> nodes from the MT6795 example, replace the current interrupts
> property description with the one from the MT6795 document since
> it makes more sense and define its items using conditionals
> as they now vary between variants. Also use conditionals to define
> valid values for the drive-strength property as well as items of
> the interrupts property for each variant since they are different
> on MT6795.
>
> Signed-off-by: Yassine Oudjana <y.oudjana at protonmail.com>
> ---
> .../pinctrl/mediatek,mt6779-pinctrl.yaml | 78 +++++-
> .../pinctrl/mediatek,pinctrl-mt6795.yaml | 227 ------------------
> 2 files changed, 73 insertions(+), 232 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> index 9d481311cc6b..f26584af5c8c 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> @@ -8,6 +8,7 @@ title: Mediatek MT6779 Pin Controller
>
> maintainers:
> - Andy Teng <andy.teng at mediatek.com>
> + - AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> - Sean Wang <sean.wang at kernel.org>
>
> description:
> @@ -18,6 +19,7 @@ properties:
> compatible:
> enum:
> - mediatek,mt6779-pinctrl
> + - mediatek,mt6795-pinctrl
> - mediatek,mt6797-pinctrl
>
> reg:
> @@ -43,9 +45,7 @@ properties:
> interrupt-controller: true
>
> interrupts:
> - maxItems: 1
> - description: |
> - Specifies the summary IRQ.
> + description: Interrupt outputs to the system interrupt controller (sysirq).
>
> "#interrupt-cells":
> const: 2
> @@ -81,6 +81,48 @@ allOf:
> - const: iocfg_lt
> - const: iocfg_tl
> - const: eint
> +
> + interrupts:
> + items:
> + - description: EINT interrupt
> +
> + patternProperties:
> + '-pins$':
> + patternProperties:
> + '^pins':
> + properties:
> + drive-strength:
> + enum: [2, 4, 8, 12, 16]
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt6795-pinctrl
> + then:
> + properties:
> + reg:
> + minItems: 2
> + maxItems: 2
> +
> + reg-names:
> + items:
> + - const: base
> + - const: eint
> +
> + interrupts:
> + items:
> + - description: EINT interrupt
> + - description: EINT event_b interrupt
On MT6795 (and many others!), event_b is optional.
minItems: 1
Regards,
Angelo
> +
> + patternProperties:
> + '-pins$':
> + patternProperties:
> + '^pins':
> + properties:
> + drive-strength:
> + enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +
> - if:
> properties:
> compatible:
> @@ -99,6 +141,19 @@ allOf:
> - const: iocfgb
> - const: iocfgr
> - const: iocfgt
> +
> + interrupts:
> + items:
> + - description: EINT interrupt
> +
> + patternProperties:
> + '-pins$':
> + patternProperties:
> + '^pins':
> + properties:
> + drive-strength:
> + enum: [2, 4, 8, 12, 16]
> +
> - if:
> properties:
> reg-names:
> @@ -169,8 +224,7 @@ patternProperties:
>
> input-schmitt-disable: true
>
> - drive-strength:
> - enum: [2, 4, 8, 12, 16]
> + drive-strength: true
>
> slew-rate:
> enum: [0, 1]
> @@ -260,6 +314,20 @@ examples:
> mediatek,pull-up-adv = <0>;
> };
> };
> +
> + /* GPIO0 set as multifunction GPIO0 */
> + gpio-pins {
> + pins {
> + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
> + };
> + };
> +
> + /* GPIO52 set as multifunction SDA0 */
> + i2c0-pins {
> + pins {
> + pinmux = <PINMUX_GPIO52__FUNC_SDA0>;
> + };
> + };
> };
>
> mmc0 {
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
> deleted file mode 100644
> index 9399e0215526..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
> +++ /dev/null
> @@ -1,227 +0,0 @@
> -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/pinctrl/mediatek,pinctrl-mt6795.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Mediatek MT6795 Pin Controller
> -
> -maintainers:
> - - AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> - - Sean Wang <sean.wang at kernel.org>
> -
> -description: |
> - The Mediatek's Pin controller is used to control SoC pins.
> -
> -properties:
> - compatible:
> - const: mediatek,mt6795-pinctrl
> -
> - gpio-controller: true
> -
> - '#gpio-cells':
> - description: |
> - Number of cells in GPIO specifier. Since the generic GPIO binding is used,
> - the amount of cells must be specified as 2. See the below
> - mentioned gpio binding representation for description of particular cells.
> - const: 2
> -
> - gpio-ranges:
> - description: GPIO valid number range.
> - maxItems: 1
> -
> - reg:
> - description:
> - Physical address base for gpio base and eint registers.
> - minItems: 2
> -
> - reg-names:
> - items:
> - - const: base
> - - const: eint
> -
> - interrupt-controller: true
> -
> - '#interrupt-cells':
> - const: 2
> -
> - interrupts:
> - description: Interrupt outputs to the system interrupt controller (sysirq).
> - minItems: 1
> - items:
> - - description: EINT interrupt
> - - description: EINT event_b interrupt
> -
> -# PIN CONFIGURATION NODES
> -patternProperties:
> - '-pins$':
> - type: object
> - additionalProperties: false
> - patternProperties:
> - '^pins':
> - type: object
> - additionalProperties: false
> - description: |
> - A pinctrl node should contain at least one subnodes representing the
> - pinctrl groups available on the machine. Each subnode will list the
> - pins it needs, and how they should be configured, with regard to muxer
> - configuration, pullups, drive strength, input enable/disable and
> - input schmitt.
> - An example of using macro:
> - pincontroller {
> - /* GPIO0 set as multifunction GPIO0 */
> - gpio-pins {
> - pins {
> - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
> - }
> - };
> - /* GPIO45 set as multifunction SDA0 */
> - i2c0-pins {
> - pins {
> - pinmux = <PINMUX_GPIO45__FUNC_SDA0>;
> - }
> - };
> - };
> - $ref: "pinmux-node.yaml"
> -
> - properties:
> - pinmux:
> - description: |
> - Integer array, represents gpio pin number and mux setting.
> - Supported pin number and mux varies for different SoCs, and are
> - defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
> - directly.
> -
> - drive-strength:
> - enum: [2, 4, 6, 8, 10, 12, 14, 16]
> -
> - bias-pull-down:
> - oneOf:
> - - type: boolean
> - - enum: [100, 101, 102, 103]
> - description: mt6795 pull down PUPD/R0/R1 type define value.
> - description: |
> - For normal pull down type, it is not necessary to specify R1R0
> - values; When pull down type is PUPD/R0/R1, adding R1R0 defines
> - will set different resistance values.
> -
> - bias-pull-up:
> - oneOf:
> - - type: boolean
> - - enum: [100, 101, 102, 103]
> - description: mt6795 pull up PUPD/R0/R1 type define value.
> - description: |
> - For normal pull up type, it is not necessary to specify R1R0
> - values; When pull up type is PUPD/R0/R1, adding R1R0 defines
> - will set different resistance values.
> -
> - bias-disable: true
> -
> - output-high: true
> -
> - output-low: true
> -
> - input-enable: true
> -
> - input-disable: true
> -
> - input-schmitt-enable: true
> -
> - input-schmitt-disable: true
> -
> - mediatek,pull-up-adv:
> - description: |
> - Pull up setings for 2 pull resistors, R0 and R1. User can
> - configure those special pins. Valid arguments are described as below:
> - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
> - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
> - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
> - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
> - $ref: /schemas/types.yaml#/definitions/uint32
> - enum: [0, 1, 2, 3]
> -
> - mediatek,pull-down-adv:
> - description: |
> - Pull down settings for 2 pull resistors, R0 and R1. User can
> - configure those special pins. Valid arguments are described as below:
> - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
> - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
> - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
> - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
> - $ref: /schemas/types.yaml#/definitions/uint32
> - enum: [0, 1, 2, 3]
> -
> - required:
> - - pinmux
> -
> -allOf:
> - - $ref: "pinctrl.yaml#"
> -
> -required:
> - - compatible
> - - reg
> - - reg-names
> - - interrupts
> - - interrupt-controller
> - - '#interrupt-cells'
> - - gpio-controller
> - - '#gpio-cells'
> - - gpio-ranges
> -
> -additionalProperties: false
> -
> -examples:
> - - |
> - #include <dt-bindings/interrupt-controller/arm-gic.h>
> - #include <dt-bindings/interrupt-controller/irq.h>
> - #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
> -
> - soc {
> - #address-cells = <2>;
> - #size-cells = <2>;
> -
> - pio: pinctrl at 10005000 {
> - compatible = "mediatek,mt6795-pinctrl";
> - reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
> - reg-names = "base", "eint";
> - gpio-controller;
> - #gpio-cells = <2>;
> - gpio-ranges = <&pio 0 0 196>;
> - interrupt-controller;
> - interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> - #interrupt-cells = <2>;
> -
> - i2c0-pins {
> - pins-sda-scl {
> - pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
> - <PINMUX_GPIO46__FUNC_SCL0>;
> - };
> - };
> -
> - mmc0-pins {
> - pins-cmd-dat {
> - pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
> - <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
> - <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
> - <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
> - <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
> - <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
> - <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
> - <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
> - <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
> - input-enable;
> - bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> - };
> -
> - pins-clk {
> - pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
> - bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> - };
> -
> - pins-rst {
> - pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
> - bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> - };
> - };
> - };
> - };
More information about the Linux-mediatek
mailing list