[PATCH v6 07/11] arm64: dts: mt7986: add usb related device nodes
Chunfeng Yun (云春峰)
Chunfeng.Yun at mediatek.com
Sun Nov 20 23:38:36 PST 2022
On Fri, 2022-11-18 at 20:01 +0100, Frank Wunderlich wrote:
> From: Sam Shih <sam.shih at mediatek.com>
>
> This patch adds USB support for MT7986.
>
> Signed-off-by: Sam Shih <sam.shih at mediatek.com>
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> ---
> changes compared to sams original version:
> - reorder xhci-clocks based on yaml binding
>
> v5:
> - update ranges/reg of usb-phy
> - not added RB from AngeloGioacchino for v4 because of these changes
>
> v6:
> - remove unused usb regulators
> - remove 3v3 regulator (will be added with emmc-patch)
> ---
> arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 8 +++
> arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 55
> ++++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 8 +++
> 3 files changed, 71 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> index 006878e3f2b2..828d504a4e48 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> @@ -140,6 +140,10 @@ &spi1 {
> status = "okay";
> };
>
> +&ssusb {
> + status = "okay";
> +};
> +
> &switch {
> ports {
> #address-cells = <1>;
> @@ -201,6 +205,10 @@ &uart2 {
> status = "okay";
> };
>
> +&usb_phy {
> + status = "okay";
> +};
> +
> &wifi {
> status = "okay";
> pinctrl-names = "default", "dbdc";
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> index 29da9b8ed753..c69b8bff7f4a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> @@ -281,6 +281,61 @@ spi1: spi at 1100b000 {
> status = "disabled";
> };
>
> + ssusb: usb at 11200000 {
> + compatible = "mediatek,mt7986-xhci",
> + "mediatek,mtk-xhci";
> + reg = <0 0x11200000 0 0x2e00>,
> + <0 0x11203e00 0 0x0100>;
> + reg-names = "mac", "ippc";
> + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
> + <&infracfg CLK_INFRA_IUSB_CK>,
> + <&infracfg CLK_INFRA_IUSB_133_CK>,
> + <&infracfg CLK_INFRA_IUSB_66M_CK>,
> + <&topckgen CLK_TOP_U2U3_XHCI_SEL>;
> + clock-names = "sys_ck",
> + "ref_ck",
> + "mcu_ck",
> + "dma_ck",
> + "xhci_ck";
> + phys = <&u2port0 PHY_TYPE_USB2>,
> + <&u3port0 PHY_TYPE_USB3>,
> + <&u2port1 PHY_TYPE_USB2>;
> + status = "disabled";
> + };
> +
> + usb_phy: t-phy at 11e10000 {
> + compatible = "mediatek,mt7986-tphy",
> + "mediatek,generic-tphy-v2";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x11e10000 0x1700>;
> + status = "disabled";
> +
> + u2port0: usb-phy at 0 {
> + reg = <0x0 0x700>;
> + clocks = <&topckgen
> CLK_TOP_DA_U2_REFSEL>,
> + <&topckgen
> CLK_TOP_DA_U2_CK_1P_SEL>;
> + clock-names = "ref", "da_ref";
> + #phy-cells = <1>;
> + };
> +
> + u3port0: usb-phy at 700 {
> + reg = <0x700 0x900>;
> + clocks = <&topckgen
> CLK_TOP_USB3_PHY_SEL>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + };
> +
> + u2port1: usb-phy at 1000 {
> + reg = <0x1000 0x700>;
> + clocks = <&topckgen
> CLK_TOP_DA_U2_REFSEL>,
> + <&topckgen
> CLK_TOP_DA_U2_CK_1P_SEL>;
> + clock-names = "ref", "da_ref";
> + #phy-cells = <1>;
> + };
> + };
> +
> ethsys: syscon at 15000000 {
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> index 2c7f1d4fb352..cdfc292002cf 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> @@ -167,10 +167,18 @@ &spi1 {
> status = "okay";
> };
>
> +&ssusb {
> + status = "okay";
> +};
> +
> &uart0 {
> status = "okay";
> };
>
> +&usb_phy {
> + status = "okay";
> +};
> +
> &wifi {
> status = "okay";
> pinctrl-names = "default", "dbdc";
Reviewed-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
Thanks a lot
More information about the Linux-mediatek
mailing list