[RFC PATCH v6] media: mediatek: vcodec: support stateless AV1 decoder
Andrzej Pietrasiewicz
andrzej.p at collabora.com
Fri Nov 18 04:26:25 PST 2022
Hi again,
W dniu 17.11.2022 o 13:42, Andrzej Pietrasiewicz pisze:
> Hi Xiaoyong Lu,
>
> Sorry about chiming in only at v6. Please see inline below.
>
> Andrzej
>
> W dniu 17.11.2022 o 07:17, Xiaoyong Lu pisze:
>> Add mediatek av1 decoder linux driver which use the stateless API in
>> MT8195.
>>
>> Signed-off-by: Xiaoyong Lu<xiaoyong.lu at mediatek.com>
>> ---
>> Changes from v5:
>>
>> - change av1 PROFILE and LEVEL cfg
>> - test by av1 fluster, result is 173/239
>>
>> Changes from v4:
>>
>> - convert vb2_find_timestamp to vb2_find_buffer
>> - test by av1 fluster, result is 173/239
>>
>> Changes from v3:
>>
>> - modify comment for struct vdec_av1_slice_slot
>> - add define SEG_LVL_ALT_Q
>> - change use_lr/use_chroma_lr parse from av1 spec
>> - use ARRAY_SIZE to replace size for loop_filter_level and
>> loop_filter_mode_deltas
>> - change array size of loop_filter_mode_deltas from 4 to 2
>> - add define SECONDARY_FILTER_STRENGTH_NUM_BITS
>> - change some hex values from upper case to lower case
>> - change *dpb_sz equal to V4L2_AV1_TOTAL_REFS_PER_FRAME + 1
>> - test by av1 fluster, result is 173/239
>>
>> Changes from v2:
>>
>> - Match with av1 uapi v3 modify
>> - test by av1 fluster, result is 173/239
>>
>> ---
>> Reference series:
>> [1]: v3 of this series is presend by Daniel Almeida.
>> message-id: 20220825225312.564619-1-daniel.almeida at collabora.com
>>
>> .../media/platform/mediatek/vcodec/Makefile | 1 +
>> .../vcodec/mtk_vcodec_dec_stateless.c | 47 +-
>> .../platform/mediatek/vcodec/mtk_vcodec_drv.h | 1 +
>> .../vcodec/vdec/vdec_av1_req_lat_if.c | 2234 +++++++++++++++++
>> .../platform/mediatek/vcodec/vdec_drv_if.c | 4 +
>> .../platform/mediatek/vcodec/vdec_drv_if.h | 1 +
>> .../platform/mediatek/vcodec/vdec_msg_queue.c | 27 +
>> .../platform/mediatek/vcodec/vdec_msg_queue.h | 4 +
>> 8 files changed, 2318 insertions(+), 1 deletion(-)
>> create mode 100644
>> drivers/media/platform/mediatek/vcodec/vdec/vdec_av1_req_lat_if.c
>>
<snip>
>> +
>> +static void *vdec_av1_get_ctrl_ptr(struct mtk_vcodec_ctx *ctx, int id)
>> +{
>> + struct v4l2_ctrl *ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl, id);
>> +
>> + if (!ctrl)
>> + return ERR_PTR(-EINVAL);
>> +
>> + return ctrl->p_cur.p;
>> +}
>
> I see we keep repeating this kind of a v4l2_ctrl_find() wrapper in drivers.
> The only reason this code cannot be factored out is the "context" struct pointer
> pointing at structs of different types. Maybe we could
>
> #define v4l2_get_ctrl_ptr(ctx, member, id) \
> __v4l2_get_ctrl_ptr((ctx), offsetof(typeof(*ctx), (member)), (id))
>
> void *__v4l2_get_ctrl_ptr(void *ctx, size_t offset, u32 id)
> {
> struct v4l2_ctrl_handler *hdl = (struct v4l2_ctrl_handler *)(ctx + offset);
> struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, id);
>
> if (!ctrl)
> return ERR_PTR(-EINVAL);
>
> return ctrl->p_cur.p;
> }
>
> and reuse v4l2_get_ctrl_ptr() in drivers?
>
> A similar kind of void* arithmetic happens in container_of, only with '-'.
>
When I think of it it seems a bit over-engineered to me now, it would
be better to give up the macro and simply pass struct v4l2_ctrl_handler *hdl.
Another second thought is that including such a wrapper in this patch
would make it too noisy if all potential users were to be updated.
A separate series would make more sense.
Regards,
Andrzej
More information about the Linux-mediatek
mailing list