[PATCH v5 07/11] arm64: dts: mt7986: add usb related device nodes

[Frank Wunderlich]

From: Sam Shih <sam.shih at mediatek.com>

This patch adds USB support for MT7986.

Signed-off-by: Sam Shih <sam.shih at mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
---
changes compared to sams original version:
- reorder xhci-clocks based on yaml binding

v5:
 - update ranges/reg of usb-phy
 - not added RB from AngeloGioacchino for v4 because of these changes
---
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 28 ++++++++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 55 ++++++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 28 ++++++++++
 3 files changed, 111 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 006878e3f2b2..2b5d7ea31b4d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -23,6 +23,24 @@ memory at 40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &crypto {
@@ -140,6 +158,12 @@ &spi1 {
 	status = "okay";
 };
 
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
 &switch {
 	ports {
 		#address-cells = <1>;
@@ -201,6 +225,10 @@ &uart2 {
 	status = "okay";
 };
 
+&usb_phy {
+	status = "okay";
+};
+
 &wifi {
 	status = "okay";
 	pinctrl-names = "default", "dbdc";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 29da9b8ed753..c69b8bff7f4a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -281,6 +281,61 @@ spi1: spi at 1100b000 {
 			status = "disabled";
 		};
 
+		ssusb: usb at 11200000 {
+			compatible = "mediatek,mt7986-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
+				 <&infracfg CLK_INFRA_IUSB_CK>,
+				 <&infracfg CLK_INFRA_IUSB_133_CK>,
+				 <&infracfg CLK_INFRA_IUSB_66M_CK>,
+				 <&topckgen CLK_TOP_U2U3_XHCI_SEL>;
+			clock-names = "sys_ck",
+				      "ref_ck",
+				      "mcu_ck",
+				      "dma_ck",
+				      "xhci_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			status = "disabled";
+		};
+
+		usb_phy: t-phy at 11e10000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e10000 0x1700>;
+			status = "disabled";
+
+			u2port0: usb-phy at 0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port0: usb-phy at 700 {
+				reg = <0x700 0x900>;
+				clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u2port1: usb-phy at 1000 {
+				reg = <0x1000 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
 		ethsys: syscon at 15000000 {
 			 #address-cells = <1>;
 			 #size-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 2c7f1d4fb352..a98025112b5a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -23,6 +23,24 @@ memory at 40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &crypto {
@@ -167,10 +185,20 @@ &spi1 {
 	status = "okay";
 };
 
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
 
+&usb_phy {
+	status = "okay";
+};
+
 &wifi {
 	status = "okay";
 	pinctrl-names = "default", "dbdc";
-- 
2.34.1