[PATCH v18 6/6] soc: mediatek: mutex: add functions that operate registers by CMDQ

moudy.ho moudy.ho at mediatek.com
Mon May 30 20:14:24 PDT 2022


On Fri, 2022-05-27 at 17:30 +0800, CK Hu wrote:
> Hi, Moudy:
> 
> On Thu, 2022-05-12 at 16:41 +0800, Moudy Ho wrote:
> > Due to HW limitations, MDP3 is necessary to enable MUTEX in each
> > frame
> > for SOF triggering and cooperate with CMDQ control to reduce the
> > amount
> > of interrupts generated(also, reduce frame latency).
> > 
> > In response to the above situation, a new interface
> > "mtk_mutex_enable_by_cmdq" has been added to achieve the purpose.
> > 
> > Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > ---
> >  drivers/soc/mediatek/mtk-mutex.c       | 47
> > +++++++++++++++++++++++++-
> >  include/linux/soc/mediatek/mtk-mutex.h |  2 ++
> >  2 files changed, 48 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-mutex.c
> > b/drivers/soc/mediatek/mtk-mutex.c
> > index 92afdee14d43..4ec2954f2f43 100644
> > --- a/drivers/soc/mediatek/mtk-mutex.c
> > +++ b/drivers/soc/mediatek/mtk-mutex.c
> > @@ -7,10 +7,12 @@
> >  #include <linux/iopoll.h>
> >  #include <linux/module.h>
> >  #include <linux/of_device.h>
> > +#include <linux/of_address.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/regmap.h>
> >  #include <linux/soc/mediatek/mtk-mmsys.h>
> >  #include <linux/soc/mediatek/mtk-mutex.h>
> > +#include <linux/soc/mediatek/mtk-cmdq.h>
> >  
> >  #define MT2701_MUTEX0_MOD0			0x2c
> >  #define MT2701_MUTEX0_SOF0			0x30
> > @@ -176,6 +178,9 @@ struct mtk_mutex_ctx {
> >  	void __iomem			*regs;
> >  	struct mtk_mutex		mutex[10];
> >  	const struct mtk_mutex_data	*data;
> > +	phys_addr_t			addr;
> > +	struct cmdq_client_reg		cmdq_reg;
> > +	bool				has_gce_client_reg;
> 
> I think this is not necessary. If cmdq_reg.size == 0, that would
> imply
> cmdq_reg is invalid.
> 

Hi CK,

Thanks for the reminder, I'll remove this unnecessary flag.

> >  };
> >  
> >  static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] =
> > {
> > @@ -531,6 +536,30 @@ void mtk_mutex_enable(struct mtk_mutex *mutex)
> >  }
> >  EXPORT_SYMBOL_GPL(mtk_mutex_enable);
> >  
> > +int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex, void *pkt)
> > +{
> > +	struct mtk_mutex_ctx *mtx = container_of(mutex, struct
> > mtk_mutex_ctx,
> > +						 mutex[mutex->id]);
> > +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> > +	struct cmdq_pkt *cmdq_pkt = (struct cmdq_pkt *)pkt;
> > +
> > +	WARN_ON(&mtx->mutex[mutex->id] != mutex);
> > +
> > +	if (!mtx->has_gce_client_reg) {
> > +		dev_err(mtx->dev, "mediatek,gce-client-reg hasn't been
> > set in dts");
> > +		return -EINVAL;
> > +	}
> > +
> > +	cmdq_pkt_write(cmdq_pkt, mtx->cmdq_reg.subsys,
> > +		       mtx->addr + DISP_REG_MUTEX_EN(mutex->id), 1);
> > +	return 0;
> > +#else
> > +	dev_err(mtx->dev, "Not support for enable MUTEX by CMDQ");
> > +	return -ENODEV;
> > +#endif
> > +}
> > +EXPORT_SYMBOL_GPL(mtk_mutex_enable_by_cmdq);
> > +
> >  void mtk_mutex_disable(struct mtk_mutex *mutex)
> >  {
> >  	struct mtk_mutex_ctx *mtx = container_of(mutex, struct
> > mtk_mutex_ctx,
> > @@ -655,8 +684,11 @@ static int mtk_mutex_probe(struct
> > platform_device *pdev)
> >  {
> >  	struct device *dev = &pdev->dev;
> >  	struct mtk_mutex_ctx *mtx;
> > -	struct resource *regs;
> > +	struct resource *regs, addr;
> >  	int i;
> > +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> > +	int ret;
> > +#endif
> >  
> >  	mtx = devm_kzalloc(dev, sizeof(*mtx), GFP_KERNEL);
> >  	if (!mtx)
> > @@ -676,6 +708,19 @@ static int mtk_mutex_probe(struct
> > platform_device *pdev)
> >  		}
> >  	}
> >  
> > +	if (of_address_to_resource(dev->of_node, 0, &addr) < 0)
> > +		mtx->addr = 0L;
> 
> You may return error, or you should check mtx->addr when use it.
> 
> Regards,
> CK
> 

This will be fixed in the next version.

Thanks,
Moudy
> > +	else
> > +		mtx->addr = addr.start;
> > +
> > +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> > +	ret = cmdq_dev_get_client_reg(dev, &mtx->cmdq_reg, 0);
> > +	if (ret)
> > +		dev_dbg(dev, "No mediatek,gce-client-reg!\n");
> > +	else
> > +		mtx->has_gce_client_reg = true;
> > +#endif
> > +
> >  	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >  	mtx->regs = devm_ioremap_resource(dev, regs);
> >  	if (IS_ERR(mtx->regs)) {
> > diff --git a/include/linux/soc/mediatek/mtk-mutex.h
> > b/include/linux/soc/mediatek/mtk-mutex.h
> > index f174452212d6..80425ae19fb7 100644
> > --- a/include/linux/soc/mediatek/mtk-mutex.h
> > +++ b/include/linux/soc/mediatek/mtk-mutex.h
> > @@ -29,6 +29,8 @@ int mtk_mutex_prepare(struct mtk_mutex *mutex);
> >  void mtk_mutex_add_comp(struct mtk_mutex *mutex,
> >  			enum mtk_ddp_comp_id id);
> >  void mtk_mutex_enable(struct mtk_mutex *mutex);
> > +int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex,
> > +			     void *pkt);
> >  void mtk_mutex_disable(struct mtk_mutex *mutex);
> >  void mtk_mutex_remove_comp(struct mtk_mutex *mutex,
> >  			   enum mtk_ddp_comp_id id);
> 
> 




More information about the Linux-mediatek mailing list