[PATCH v7 2/2] iommu/mediatek: Allow page table PA up to 35bit
yf.wang at mediatek.com
yf.wang at mediatek.com
Mon May 30 01:04:29 PDT 2022
From: Yunfei Wang <yf.wang at mediatek.com>
Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA. So add
the quirk IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT to let level 1 and level 2
pgtable support at most 35bit PA.
Signed-off-by: Ning Li <ning.li at mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang at mediatek.com>
---
drivers/iommu/mtk_iommu.c | 29 +++++++++++++++++++++++++----
1 file changed, 25 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 6fd75a60abd6..dd9661690ca6 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -33,6 +33,9 @@
#define REG_MMU_PT_BASE_ADDR 0x000
#define MMU_PT_ADDR_MASK GENMASK(31, 7)
+/* Mediatek extend ttbr bits[2:0] for PA bits[34:32] */
+#define MMU_PT_35BIT_PA(pa) \
+ ((pa & GENMASK_ULL(31, 7)) | ((pa & GENMASK_ULL(34, 32)) >> 32))
#define REG_MMU_INVALIDATE 0x020
#define F_ALL_INVLD 0x2
@@ -118,6 +121,7 @@
#define WR_THROT_EN BIT(6)
#define HAS_LEGACY_IVRP_PADDR BIT(7)
#define IOVA_34_EN BIT(8)
+#define PGTABLE_PA_35_EN BIT(9)
#define MTK_IOMMU_HAS_FLAG(pdata, _x) \
((((pdata)->flags) & (_x)) == (_x))
@@ -401,6 +405,9 @@ static int mtk_iommu_domain_finalise(struct mtk_iommu_domain *dom,
.iommu_dev = data->dev,
};
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, PGTABLE_PA_35_EN))
+ dom->cfg.quirks |= IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT;
+
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE))
dom->cfg.oas = data->enable_4GB ? 33 : 32;
else
@@ -450,6 +457,7 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
struct device *m4udev = data->dev;
int ret, domid;
+ u32 regval;
domid = mtk_iommu_get_domain_id(dev, data->plat_data);
if (domid < 0)
@@ -472,8 +480,13 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
return ret;
}
data->m4u_dom = dom;
- writel(dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
- data->base + REG_MMU_PT_BASE_ADDR);
+
+ /* Bits[6:3] are invalid for mediatek platform */
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, PGTABLE_PA_35_EN))
+ regval = MMU_PT_35BIT_PA(dom->cfg.arm_v7s_cfg.ttbr);
+ else
+ regval = dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK;
+ writel(regval, data->base + REG_MMU_PT_BASE_ADDR);
pm_runtime_put(m4udev);
}
@@ -987,6 +1000,7 @@ static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
struct mtk_iommu_suspend_reg *reg = &data->reg;
struct mtk_iommu_domain *m4u_dom = data->m4u_dom;
void __iomem *base = data->base;
+ u32 regval;
int ret;
ret = clk_prepare_enable(data->bclk);
@@ -1010,7 +1024,13 @@ static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
writel_relaxed(reg->vld_pa_rng, base + REG_MMU_VLD_PA_RNG);
- writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK, base + REG_MMU_PT_BASE_ADDR);
+
+ /* Bits[6:3] are invalid for mediatek platform */
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, PGTABLE_PA_35_EN))
+ regval = MMU_PT_35BIT_PA(m4u_dom->cfg.arm_v7s_cfg.ttbr);
+ else
+ regval = m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK;
+ writel(regval, base + REG_MMU_PT_BASE_ADDR);
/*
* Users may allocate dma buffer before they call pm_runtime_get,
@@ -1038,7 +1058,8 @@ static const struct mtk_iommu_plat_data mt2712_data = {
static const struct mtk_iommu_plat_data mt6779_data = {
.m4u_plat = M4U_MT6779,
- .flags = HAS_SUB_COMM | OUT_ORDER_WR_EN | WR_THROT_EN,
+ .flags = HAS_SUB_COMM | OUT_ORDER_WR_EN | WR_THROT_EN |
+ PGTABLE_PA_35_EN,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
--
2.18.0
More information about the Linux-mediatek
mailing list