[PATCH v2 3/7] iommu: mtk_iommu: Lookup phandle to retrieve syscon to pericfg

[Yong Wu]

On Wed, 2022-05-18 at 12:04 +0200, AngeloGioacchino Del Regno wrote:
> On some SoCs (of which only MT8195 is supported at the time of
> writing),
> the "R" and "W" (I/O) enable bits for the IOMMUs are in the
> pericfg_ao
> register space and not in the IOMMU space: as it happened already
> with
> infracfg, it is expected that this list will grow.
> 
> Instead of specifying pericfg compatibles on a per-SoC basis,
> following
> what was done with infracfg, let's lookup the syscon by phandle
> instead.
> Also following the previous infracfg change, add a warning for
> outdated
> devicetrees, in hope that the user will take action.
> 
> Signed-off-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> ---
>  drivers/iommu/mtk_iommu.c | 26 ++++++++++++++++----------
>  1 file changed, 16 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index d16b95e71ded..090cf6e15f85 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -138,6 +138,8 @@
>  /* PM and clock always on. e.g. infra iommu */
>  #define PM_CLK_AO			BIT(15)
>  #define IFA_IOMMU_PCIE_SUPPORT		BIT(16)
> +/* IOMMU I/O (r/w) is enabled using PERICFG_IOMMU_1 register */
> +#define HAS_PERI_IOMMU1_REG		BIT(17)
>  
>  #define MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, mask)	\
>  				((((pdata)->flags) & (mask)) == (_x))
> @@ -187,7 +189,6 @@ struct mtk_iommu_plat_data {
>  	u32			flags;
>  	u32			inv_sel_reg;
>  
> -	char			*pericfg_comp_str;
>  	struct list_head	*hw_list;
>  	unsigned int		iova_region_nr;
>  	const struct mtk_iommu_iova_region	*iova_region;
> @@ -1214,14 +1215,19 @@ static int mtk_iommu_probe(struct
> platform_device *pdev)
>  			goto out_runtime_disable;
>  		}
>  	} else if (MTK_IOMMU_IS_TYPE(data->plat_data,
> MTK_IOMMU_TYPE_INFRA) &&
> -		   data->plat_data->pericfg_comp_str) {
> -		infracfg = syscon_regmap_lookup_by_compatible(data-
> >plat_data->pericfg_comp_str);
> -		if (IS_ERR(infracfg)) {
> -			ret = PTR_ERR(infracfg);
> -			goto out_runtime_disable;
> -		}
> +		   MTK_IOMMU_HAS_FLAG(data->plat_data,
> HAS_PERI_IOMMU1_REG)) {
> +		data->pericfg = syscon_regmap_lookup_by_phandle(dev-
> >of_node, "mediatek,pericfg");

I'm not keen to add this property. Currently only mt8195 use this
setting. In the lastest SoC, we move this setting to ATF. thus I think
we could keep the current way, no need add a new DT property only for
mt8195.

> +		if (IS_ERR(data->pericfg)) {
> +			dev_info(dev, "Cannot find phandle to
> mediatek,pericfg:"
> +				      " Please update your
> devicetree.\n");
>  
> -		data->pericfg = infracfg;
> +			p = "mediatek,mt8195-pericfg_ao";
> +			data->pericfg =
> syscon_regmap_lookup_by_compatible(p);
> +			if (IS_ERR(data->pericfg)) {
> +				ret = PTR_ERR(data->pericfg);
> +				goto out_runtime_disable;
> +			}
> +		}
>  	}
>  
>  	platform_set_drvdata(pdev, data);
> @@ -1480,8 +1486,8 @@ static const struct mtk_iommu_plat_data
> mt8192_data = {
>  static const struct mtk_iommu_plat_data mt8195_data_infra = {
>  	.m4u_plat	  = M4U_MT8195,
>  	.flags            = WR_THROT_EN | DCM_DISABLE | STD_AXI_MODE |
> PM_CLK_AO |
> -			    MTK_IOMMU_TYPE_INFRA |
> IFA_IOMMU_PCIE_SUPPORT,
> -	.pericfg_comp_str = "mediatek,mt8195-pericfg_ao",
> +			    HAS_PERI_IOMMU1_REG | MTK_IOMMU_TYPE_INFRA
> |
> +			    IFA_IOMMU_PCIE_SUPPORT,
>  	.inv_sel_reg      = REG_MMU_INV_SEL_GEN2,
>  	.banks_num	  = 5,
>  	.banks_enable     = {true, false, false, false, true},