[PATCH v2] arm64: dts: mt7986: add built-in Wi-Fi device nodes

[Krzysztof Kozlowski]

On 24/05/2022 05:24, Peter Chiu wrote:
> This enables built-in 802.11ax Wi-Fi support.
> 
> Reviewed-by: Sam Shih <sam.shih at mediatek.com>
> Reviewed-by: Ryder Lee <ryder.lee at mediatek.com>
> Signed-off-by: Peter Chiu <chui-hao.chiu at mediatek.com>
> ---
> v2: add clocks and clock-names
> ---
>  arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 41 +++++++++++++++++++
>  arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 22 ++++++++++
>  arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 43 ++++++++++++++++++++
>  3 files changed, 106 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> index 24c155c71f0d..359e14f8e9f1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> @@ -57,6 +57,13 @@
>  	status = "okay";
>  };
>  
> +&wmac {
> +	status = "okay";
> +	pinctrl-names = "default", "dbdc";
> +	pinctrl-0 = <&wf_2g_5g_pins>;
> +	pinctrl-1 = <&wf_dbdc_pins>;
> +};
> +
>  &pio {
>  	pcie_pins: pcie-pins {
>  		mux {
> @@ -99,6 +106,40 @@
>  			groups = "jtag";
>  		};
>  	};
> +
> +	wf_2g_5g_pins: wf_2g_5g-pins {
> +		mux {
> +			function = "wifi";
> +			groups = "wf_2g", "wf_5g";
> +		};
> +		conf {
> +			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> +			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> +			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> +			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
> +			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
> +			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
> +			       "WF1_TOP_CLK", "WF1_TOP_DATA";
> +			drive-strength = <4>;
> +		};
> +	};
> +
> +	wf_dbdc_pins: wf_dbdc-pins {
> +		mux {
> +			function = "wifi";
> +			groups = "wf_dbdc";
> +		};
> +		conf {
> +			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> +			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> +			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> +			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
> +			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
> +			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
> +			       "WF1_TOP_CLK", "WF1_TOP_DATA";
> +			drive-strength = <4>;
> +		};
> +	};
>  };
>  
>  &spi0 {
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> index 9663a0779416..47d719fb66fb 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> @@ -8,6 +8,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/mt7986-clk.h>
>  #include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/reset/mt7986-resets.h>
>  
>  / {
>  	interrupt-parent = <&gic>;
> @@ -80,6 +81,11 @@
>  			reg = <0 0x43000000 0 0x30000>;
>  			no-map;
>  		};
> +
> +		wmcpu_emi: wmcpu-reserved at 4fc00000 {
> +			no-map;
> +			reg = <0 0x4fc00000 0 0x00100000>;
> +		};
>  	};
>  
>  	timer {
> @@ -381,6 +387,22 @@
>  			 #reset-cells = <1>;
>  		};
>  
> +		wmac: wmac at 18000000 {

This is wifi, right? If so, then generic node name - wifi.

> +			compatible = "mediatek,mt7986-wmac";
> +			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
> +			reset-names = "consys";
> +			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
> +				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
> +			clock-names = "mcu", "ap2conn";
> +			reg = <0 0x18000000 0 0x1000000>,
> +			      <0 0x10003000 0 0x1000>,
> +			      <0 0x11d10000 0 0x1000>;
> +			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
> +			memory-region = <&wmcpu_emi>;
> +		};
>  	};
>  
>  };
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> index d4078feb4aad..f25312c9a289 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> @@ -97,3 +97,46 @@
>  &usb_phy {
>  	status = "okay";
>  };
> +
> +&wmac {
> +	status = "okay";
> +	pinctrl-names = "default", "dbdc";
> +	pinctrl-0 = <&wf_2g_5g_pins>;
> +	pinctrl-1 = <&wf_dbdc_pins>;
> +};
> +
> +&pio {
> +	wf_2g_5g_pins: wf_2g_5g-pins {

No underscores in node names, unless binding requires them... but it
should not as this is not allowed character.


Best regards,
Krzysztof