[PATCH v2 3/3] mt76: mt7921: introduce ACPI SAR config in tx power

Deren Wu Deren.Wu at mediatek.com
Fri May 20 02:03:39 PDT 2022


From: Deren Wu <deren.wu at mediatek.com>

Add new function mt7921_set_tx_sar_pwr() to update SAR power from
.set_sar_specs and ACPI setting. Both settings would be merged into
mt76_freq_range_power for final tx power value.

Reviewed-by: Sean Wang <sean.wang at mediatek.com>
Co-developed-by: Ming Yen Hsieh <mingyen.hsieh at mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh at mediatek.com>
Signed-off-by: Deren Wu <deren.wu at mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt7921/init.c  |  3 +-
 .../net/wireless/mediatek/mt76/mt7921/main.c  | 31 +++++++++++++------
 .../wireless/mediatek/mt76/mt7921/mt7921.h    |  2 ++
 3 files changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
index 0c4e973d002e..48a10aaecc62 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
@@ -34,14 +34,13 @@ mt7921_regd_notifier(struct wiphy *wiphy,
 {
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct mt7921_dev *dev = mt7921_hw_dev(hw);
-	struct mt7921_phy *phy = mt7921_hw_phy(hw);
 
 	memcpy(dev->mt76.alpha2, request->alpha2, sizeof(dev->mt76.alpha2));
 	dev->mt76.region = request->dfs_region;
 
 	mt7921_mutex_acquire(dev);
 	mt76_connac_mcu_set_channel_domain(hw->priv);
-	mt76_connac_mcu_set_rate_txpower(phy->mt76);
+	mt7921_set_tx_sar_pwr(hw, NULL);
 	mt7921_mutex_release(dev);
 }
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 80279f342109..acf6567368b7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -257,7 +257,7 @@ int __mt7921_start(struct mt7921_phy *phy)
 	if (err)
 		return err;
 
-	err = mt76_connac_mcu_set_rate_txpower(phy->mt76);
+	err = mt7921_set_tx_sar_pwr(mphy->hw, NULL);
 	if (err)
 		return err;
 
@@ -548,7 +548,7 @@ static int mt7921_config(struct ieee80211_hw *hw, u32 changed)
 	mt7921_mutex_acquire(dev);
 
 	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		ret = mt76_connac_mcu_set_rate_txpower(phy->mt76);
+		ret = mt7921_set_tx_sar_pwr(hw, NULL);
 		if (ret)
 			goto out;
 	}
@@ -1469,20 +1469,33 @@ static void mt7921_ipv6_addr_change(struct ieee80211_hw *hw,
 }
 #endif
 
+int mt7921_set_tx_sar_pwr(struct ieee80211_hw *hw,
+			  const struct cfg80211_sar_specs *sar)
+{
+	struct mt76_phy *mphy = hw->priv;
+	int err;
+
+	if (sar) {
+		err = mt76_init_sar_power(hw, sar);
+		if (err)
+			return err;
+	}
+
+	mt7921_init_acpi_sar_power(mt7921_hw_phy(hw), !sar);
+
+	err = mt76_connac_mcu_set_rate_txpower(mphy);
+
+	return err;
+}
+
 static int mt7921_set_sar_specs(struct ieee80211_hw *hw,
 				const struct cfg80211_sar_specs *sar)
 {
 	struct mt7921_dev *dev = mt7921_hw_dev(hw);
-	struct mt76_phy *mphy = hw->priv;
 	int err;
 
 	mt7921_mutex_acquire(dev);
-	err = mt76_init_sar_power(hw, sar);
-	if (err)
-		goto out;
-
-	err = mt76_connac_mcu_set_rate_txpower(mphy);
-out:
+	err = mt7921_set_tx_sar_pwr(hw, sar);
 	mt7921_mutex_release(dev);
 
 	return err;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
index 8b26bece28ae..d9fc457e420d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
@@ -501,4 +501,6 @@ mt7921_init_acpi_sar_power(struct mt7921_phy *phy, bool set_default)
 	return 0;
 }
 #endif
+int mt7921_set_tx_sar_pwr(struct ieee80211_hw *hw,
+			  const struct cfg80211_sar_specs *sar);
 #endif
-- 
2.18.0




More information about the Linux-mediatek mailing list