[PATCH v2 4/4] soc: mediatek: svs: add support for mt8195
Jia-Wei Chang
jia-wei.chang at mediatek.com
Thu May 19 22:08:38 PDT 2022
On Thu, 2022-05-19 at 10:34 +0200, AngeloGioacchino Del Regno wrote:
> Il 19/05/22 08:09, Tim Chang ha scritto:
> > From: Jia-Wei Chang <jia-wei.chang at mediatek.com>
> >
> > To support svs on MT8195, add corresponding bank information,
> > platform
> > data, probe and parsing function.
> >
> > Signed-off-by: Jia-Wei Chang <jia-wei.chang at mediatek.com>
>
> Hello Jia-Wei,
> thanks for the patch!
>
> However, there are a few things to improve...
>
> > ---
> > drivers/soc/mediatek/mtk-svs.c | 193
> > +++++++++++++++++++++++++++++++++
> > 1 file changed, 193 insertions(+)
> >
> > diff --git a/drivers/soc/mediatek/mtk-svs.c
> > b/drivers/soc/mediatek/mtk-svs.c
> > index 656d0361ff7d..919226faee6d 100644
> > --- a/drivers/soc/mediatek/mtk-svs.c
> > +++ b/drivers/soc/mediatek/mtk-svs.c
> > @@ -1680,6 +1680,92 @@ static int svs_bank_resource_setup(struct
> > svs_platform *svsp)
> > return 0;
> > }
> >
> > +static bool svs_mt8195_efuse_parsing(struct svs_platform *svsp)
> > +{
> > + struct svs_bank *svsb;
> > + struct nvmem_cell *cell;
> > + u32 idx, i, ft_pgm, vmin, golden_temp;
> > +
> > + for (i = 0; i < svsp->efuse_max; i++)
> > + if (svsp->efuse[i])
> > + dev_info(svsp->dev, "M_HW_RES%d: 0x%08x\n",
> > + i, svsp->efuse[i]);
> > +
> > + if (!svsp->efuse[10]) {
> > + dev_notice(svsp->dev, "svs_efuse[10] = 0x0?\n");
> > + return false;
> > + }
> > +
> > + /* Svs efuse parsing */
> > + ft_pgm = svsp->efuse[0] & GENMASK(7, 0);
> > + vmin = (svsp->efuse[19] >> 4) & GENMASK(1, 0);
> > +
> > + for (idx = 0; idx < svsp->bank_max; idx++) {
> > + svsb = &svsp->banks[idx];
> > +
> > + if (svsb->sw_id != SVSB_GPU)
> > + return false;
> > +
> > + if (vmin == 0x1)
> > + svsb->vmin = 0x1e;
> > +
> > + if (ft_pgm == 0)
> > + svsb->volt_flags |= SVSB_INIT01_VOLT_IGNORE;
> > +
> > + if (svsb->type == SVSB_LOW) {
> > + svsb->mtdes = svsp->efuse[10] & GENMASK(7, 0);
> > + svsb->bdes = (svsp->efuse[10] >> 16) &
> > GENMASK(7, 0);
> > + svsb->mdes = (svsp->efuse[10] >> 24) &
> > GENMASK(7, 0);
> > + svsb->dcbdet = (svsp->efuse[8]) & GENMASK(7,
> > 0);
> > + svsb->dcmdet = (svsp->efuse[8] >> 8) &
> > GENMASK(7, 0);
> > + } else if (svsb->type == SVSB_HIGH) {
> > + svsb->mtdes = svsp->efuse[9] & GENMASK(7, 0);
> > + svsb->bdes = (svsp->efuse[9] >> 16) &
> > GENMASK(7, 0);
> > + svsb->mdes = (svsp->efuse[9] >> 24) &
> > GENMASK(7, 0);
> > + svsb->dcbdet = (svsp->efuse[8]) & GENMASK(7,
> > 0);
> > + svsb->dcmdet = (svsp->efuse[8] >> 8) &
> > GENMASK(7, 0);
> > + }
> > +
> > + svsb->vmax += svsb->dvt_fixed;
> > + }
> > +
> > + /* Thermal efuse parsing */
> > + cell = nvmem_cell_get(svsp->dev, "t-calibration-data");
> > + if (IS_ERR_OR_NULL(cell)) {
> > + dev_err(svsp->dev, "no \"t-calibration-data\"? %ld\n",
> > + PTR_ERR(cell));
> > + return false;
> > + }
> > +
> > + svsp->tefuse = nvmem_cell_read(cell, &svsp->tefuse_max);
> > + if (IS_ERR(svsp->tefuse)) {
> > + dev_err(svsp->dev, "cannot read thermal efuse: %ld\n",
> > + PTR_ERR(svsp->tefuse));
> > + nvmem_cell_put(cell);
> > + return false;
> > + }
> > +
> > + svsp->tefuse_max /= sizeof(u32);
> > + nvmem_cell_put(cell);
> > +
> > + for (i = 0; i < svsp->tefuse_max; i++)
> > + if (svsp->tefuse[i] != 0)
> > + break;
> > +
> > + if (i == svsp->tefuse_max)
> > + golden_temp = 50; /* All thermal efuse data are 0 */
> > + else
> > + golden_temp = (svsp->tefuse[0] >> 24) & GENMASK(7, 0);
> > +
> > + for (idx = 0; idx < svsp->bank_max; idx++) {
> > + svsb = &svsp->banks[idx];
> > + svsb->mts = 500;
> > + svsb->bts = (((500 * golden_temp + 250460) / 1000) -
> > 25) * 4;
> > + }
> > +
> > + return true;
> > +}
> > +
> > static bool svs_mt8192_efuse_parsing(struct svs_platform *svsp)
> > {
> > struct svs_bank *svsb;
> > @@ -2141,6 +2227,39 @@ static struct device
> > *svs_add_device_link(struct svs_platform *svsp,
> > return dev;
> > }
> >
> > +static int svs_mt8195_platform_probe(struct svs_platform *svsp)
>
> We can reuse svs_mt8192_platform_probe() for MT8195, as this is
> simply
> a duplicate of that.
Sure, I will remove svs_mt8195_platform_probe and reuse
svs_mt8192_platform_probe instead in the next version.
>
> > +{
> > + struct device *dev;
> > + struct svs_bank *svsb;
> > + u32 idx;
> > +
> > + svsp->rst = devm_reset_control_get_optional(svsp->dev,
> > "svs_rst");
> > + if (IS_ERR(svsp->rst))
> > + return dev_err_probe(svsp->dev, PTR_ERR(svsp->rst),
> > + "cannot get svs reset control\n");
> > +
> > + dev = svs_add_device_link(svsp, "lvts");
> > + if (IS_ERR(dev))
> > + return dev_err_probe(svsp->dev, PTR_ERR(dev),
> > + "failed to get lvts device\n");
> > +
> > + for (idx = 0; idx < svsp->bank_max; idx++) {
> > + svsb = &svsp->banks[idx];
> > +
> > + if (svsb->type == SVSB_HIGH)
> > + svsb->opp_dev = svs_add_device_link(svsp,
> > "mali");
> > + else if (svsb->type == SVSB_LOW)
> > + svsb->opp_dev = svs_get_subsys_device(svsp,
> > "mali");
> > +
> > + if (IS_ERR(svsb->opp_dev))
> > + return dev_err_probe(svsp->dev, PTR_ERR(svsb-
> > >opp_dev),
> > + "failed to get OPP device
> > for bank %d\n",
> > + idx);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int svs_mt8192_platform_probe(struct svs_platform *svsp)
> > {
> > struct device *dev;
> > @@ -2257,6 +2376,67 @@ static int svs_mt8183_platform_probe(struct
> > svs_platform *svsp)
> > return 0;
> > }
> >
> > +static struct svs_bank svs_mt8195_banks[] = {
> > + {
> > + .sw_id = SVSB_GPU,
> > + .type = SVSB_LOW,
> > + .set_freq_pct = svs_set_bank_freq_pct_v3,
> > + .get_volts = svs_get_bank_volts_v3,
> > + .tzone_name = "gpu1",
> > + .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT,
> > + .mode_support = SVSB_MODE_INIT02,
> > + .opp_count = MAX_OPP_ENTRIES,
> > + .freq_base = 640000000,
> > + .turn_freq_base = 640000000,
> > + .volt_step = 6250,
> > + .volt_base = 400000,
> > + .vmax = 0x38,
> > + .vmin = 0x14,
> > + .age_config = 0x555555,
> > + .dc_config = 0x1,
> > + .dvt_fixed = 0x1,
> > + .vco = 0x18,
> > + .chk_shift = 0x87,
> > + .core_sel = 0x0fff0100,
> > + .int_st = BIT(0),
> > + .ctl0 = 0x00540003,
>
>
> > + .tzone_htemp = 85000,
> > + .tzone_htemp_voffset = 0,
> > + .tzone_ltemp = 25000,
> > + .tzone_ltemp_voffset = 7,
>
> tzone_{h,l}temp(_voffset) params are used only when (volt_flags &
> SVSB_MODE_MON).
> On this entry, there's no MON mode, so these four are useless: please
> remove.
Sure, I will remove them in the next version.
>
> > + },
> > + {
> > + .sw_id = SVSB_GPU,
> > + .type = SVSB_HIGH,
> > + .set_freq_pct = svs_set_bank_freq_pct_v3,
> > + .get_volts = svs_get_bank_volts_v3,
> > + .tzone_name = "gpu1",
> > + .volt_flags = SVSB_REMOVE_DVTFIXED_VOLT |
> > + SVSB_MON_VOLT_IGNORE,
> > + .mode_support = SVSB_MODE_INIT02 |
> > SVSB_MODE_MON,
> > + .opp_count = MAX_OPP_ENTRIES,
> > + .freq_base = 880000000,
> > + .turn_freq_base = 640000000,
> > + .vboot = 0x38,
> > + .volt_step = 6250,
> > + .volt_base = 400000,
> > + .vmax = 0x38,
> > + .vmin = 0x14,
> > + .age_config = 0x555555,
> > + .dc_config = 0x1,
> > + .dvt_fixed = 0x6,
> > + .vco = 0x18,
> > + .chk_shift = 0x87,
> > + .core_sel = 0x0fff0101,
> > + .int_st = BIT(1),
> > + .ctl0 = 0x00540003,
> > + .tzone_htemp = 85000,
> > + .tzone_htemp_voffset = 0,
> > + .tzone_ltemp = 25000,
> > + .tzone_ltemp_voffset = 7,
> > + },
> > +};
> > +
> > static struct svs_bank svs_mt8192_banks[] = {
> > {
> > .sw_id = SVSB_GPU,
> > @@ -2559,6 +2739,16 @@ static struct svs_bank svs_mt8183_banks[] =
> > {
> > },
> > };
> >
> > +static const struct svs_platform_data svs_mt8195_platform_data = {
> > + .name = "mt8195-svs",
> > + .banks = svs_mt8195_banks,
> > + .efuse_parsing = svs_mt8195_efuse_parsing,
> > + .probe = svs_mt8195_platform_probe,
>
> .probe = svs_mt8192_platform_probe,
I will use mt8192's instead in the next version.
Thanks.
>
> > + .irqflags = IRQF_TRIGGER_HIGH,
> > + .regs = svs_regs_v2,
> > + .bank_max = ARRAY_SIZE(svs_mt8195_banks),
> > +};
> > +
>
> Regards,
> Angelo
>
More information about the Linux-mediatek
mailing list