[PATCH 05/56] ASoC: bcm: Update to use set_fmt_new callback

Charles Keepax ckeepax at opensource.cirrus.com
Thu May 19 08:42:27 PDT 2022


As part of updating the core to directly tell drivers if they are clock
provider or consumer update these CPU side drivers to use the new direct
callback.

Signed-off-by: Charles Keepax <ckeepax at opensource.cirrus.com>
---
 sound/soc/bcm/bcm2835-i2s.c | 22 +++++++++++-----------
 sound/soc/bcm/cygnus-ssp.c  |  6 +++---
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
index e3fc4bee8cfdc..aa7d8e081f89a 100644
--- a/sound/soc/bcm/bcm2835-i2s.c
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -133,8 +133,8 @@ static void bcm2835_i2s_start_clock(struct bcm2835_i2s_dev *dev)
 		return;
 
 	switch (provider) {
-	case SND_SOC_DAIFMT_CBC_CFC:
-	case SND_SOC_DAIFMT_CBC_CFP:
+	case SND_SOC_DAIFMT_BP_FP:
+	case SND_SOC_DAIFMT_BP_FC:
 		clk_prepare_enable(dev->clk);
 		dev->clk_prepared = true;
 		break;
@@ -385,12 +385,12 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
 
 	/* Check if CPU is bit clock provider */
 	switch (dev->fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
-	case SND_SOC_DAIFMT_CBC_CFC:
-	case SND_SOC_DAIFMT_CBC_CFP:
+	case SND_SOC_DAIFMT_BP_FP:
+	case SND_SOC_DAIFMT_BP_FC:
 		bit_clock_provider = true;
 		break;
-	case SND_SOC_DAIFMT_CBP_CFC:
-	case SND_SOC_DAIFMT_CBP_CFP:
+	case SND_SOC_DAIFMT_BC_FP:
+	case SND_SOC_DAIFMT_BC_FC:
 		bit_clock_provider = false;
 		break;
 	default:
@@ -399,12 +399,12 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
 
 	/* Check if CPU is frame sync provider */
 	switch (dev->fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
-	case SND_SOC_DAIFMT_CBC_CFC:
-	case SND_SOC_DAIFMT_CBP_CFC:
+	case SND_SOC_DAIFMT_BP_FP:
+	case SND_SOC_DAIFMT_BC_FP:
 		frame_sync_provider = true;
 		break;
-	case SND_SOC_DAIFMT_CBC_CFP:
-	case SND_SOC_DAIFMT_CBP_CFP:
+	case SND_SOC_DAIFMT_BP_FC:
+	case SND_SOC_DAIFMT_BC_FC:
 		frame_sync_provider = false;
 		break;
 	default:
@@ -743,7 +743,7 @@ static const struct snd_soc_dai_ops bcm2835_i2s_dai_ops = {
 	.prepare	= bcm2835_i2s_prepare,
 	.trigger	= bcm2835_i2s_trigger,
 	.hw_params	= bcm2835_i2s_hw_params,
-	.set_fmt	= bcm2835_i2s_set_dai_fmt,
+	.set_fmt_new	= bcm2835_i2s_set_dai_fmt,
 	.set_bclk_ratio	= bcm2835_i2s_set_dai_bclk_ratio,
 	.set_tdm_slot	= bcm2835_i2s_set_dai_tdm_slot,
 };
diff --git a/sound/soc/bcm/cygnus-ssp.c b/sound/soc/bcm/cygnus-ssp.c
index 9698f4531c90f..257f3657bcd6e 100644
--- a/sound/soc/bcm/cygnus-ssp.c
+++ b/sound/soc/bcm/cygnus-ssp.c
@@ -849,11 +849,11 @@ static int cygnus_ssp_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
 	ssp_newcfg = 0;
 
 	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
-	case SND_SOC_DAIFMT_CBP_CFP:
+	case SND_SOC_DAIFMT_BC_FC:
 		ssp_newcfg |= BIT(I2S_OUT_CFGX_SLAVE_MODE);
 		aio->is_slave = 1;
 		break;
-	case SND_SOC_DAIFMT_CBC_CFC:
+	case SND_SOC_DAIFMT_BP_FP:
 		ssp_newcfg &= ~BIT(I2S_OUT_CFGX_SLAVE_MODE);
 		aio->is_slave = 0;
 		break;
@@ -1148,7 +1148,7 @@ static const struct snd_soc_dai_ops cygnus_ssp_dai_ops = {
 	.shutdown	= cygnus_ssp_shutdown,
 	.trigger	= cygnus_ssp_trigger,
 	.hw_params	= cygnus_ssp_hw_params,
-	.set_fmt	= cygnus_ssp_set_fmt,
+	.set_fmt_new	= cygnus_ssp_set_fmt,
 	.set_sysclk	= cygnus_ssp_set_sysclk,
 	.set_tdm_slot	= cygnus_set_dai_tdm_slot,
 };
-- 
2.30.2




More information about the Linux-mediatek mailing list