[PATCH] dt-bindings: serial: mtk-uart: Convert txt to json-schema
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Thu May 19 03:59:28 PDT 2022
Convert the mtk-uart documentation from freeform text to a json-schema.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
.../bindings/serial/mediatek,uart.yaml | 118 ++++++++++++++++++
.../devicetree/bindings/serial/mtk-uart.txt | 59 ---------
2 files changed, 118 insertions(+), 59 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/mediatek,uart.yaml
delete mode 100644 Documentation/devicetree/bindings/serial/mtk-uart.txt
diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
new file mode 100644
index 000000000000..d5a1386162cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/mediatek,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+ - Matthias Brugger <matthias.bgg at gmail.com>
+
+allOf:
+ - $ref: serial.yaml#
+
+description: |+
+ The MediaTek UART is based on the basic 8250 UART and compatible
+ with 16550A, with enhancements for high speed baud rates and
+ support for DMA.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - mediatek,mt2701-uart
+ - mediatek,mt2712-uart
+ - mediatek,mt6580-uart
+ - mediatek,mt6582-uart
+ - mediatek,mt6589-uart
+ - mediatek,mt6755-uart
+ - mediatek,mt6765-uart
+ - mediatek,mt6779-uart
+ - mediatek,mt6795-uart
+ - mediatek,mt6797-uart
+ - mediatek,mt7622-uart
+ - mediatek,mt7623-uart
+ - mediatek,mt7629-uart
+ - mediatek,mt7986-uart
+ - mediatek,mt8127-uart
+ - mediatek,mt8135-uart
+ - mediatek,mt8173-uart
+ - mediatek,mt8183-uart
+ - mediatek,mt8186-uart
+ - mediatek,mt8192-uart
+ - mediatek,mt8195-uart
+ - mediatek,mt8516-uart
+ - const: mediatek,mt6577-uart
+
+ reg:
+ description: The base address of the UART register bank
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: The clock the baudrate is derived from
+ - description: The bus clock for register accesses
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: baud
+ - const: bus
+
+ dmas:
+ items:
+ - description: phandle to TX DMA
+ - description: phandle to RX DMA
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ description:
+ The UART interrupt and optionally the RX in-band wakeup interrupt.
+ minItems: 1
+ items:
+ - const: uart
+ - const: wakeup
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ serial at 11006000 {
+ compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
+ reg = <0x11006000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "uart", "wakeup";
+ clocks = <&uart_clk>, <&bus_clk>;
+ clock-names = "baud", "bus";
+ pinctrl-0 = <&uart_pin>;
+ pinctrl-1 = <&uart_pin_sleep>;
+ pinctrl-names = "default", "sleep";
+ };
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
deleted file mode 100644
index 113b5d6a2245..000000000000
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* MediaTek Universal Asynchronous Receiver/Transmitter (UART)
-
-Required properties:
-- compatible should contain:
- * "mediatek,mt2701-uart" for MT2701 compatible UARTS
- * "mediatek,mt2712-uart" for MT2712 compatible UARTS
- * "mediatek,mt6580-uart" for MT6580 compatible UARTS
- * "mediatek,mt6582-uart" for MT6582 compatible UARTS
- * "mediatek,mt6589-uart" for MT6589 compatible UARTS
- * "mediatek,mt6755-uart" for MT6755 compatible UARTS
- * "mediatek,mt6765-uart" for MT6765 compatible UARTS
- * "mediatek,mt6779-uart" for MT6779 compatible UARTS
- * "mediatek,mt6795-uart" for MT6795 compatible UARTS
- * "mediatek,mt6797-uart" for MT6797 compatible UARTS
- * "mediatek,mt7622-uart" for MT7622 compatible UARTS
- * "mediatek,mt7623-uart" for MT7623 compatible UARTS
- * "mediatek,mt7629-uart" for MT7629 compatible UARTS
- * "mediatek,mt7986-uart", "mediatek,mt6577-uart" for MT7986 compatible UARTS
- * "mediatek,mt8127-uart" for MT8127 compatible UARTS
- * "mediatek,mt8135-uart" for MT8135 compatible UARTS
- * "mediatek,mt8173-uart" for MT8173 compatible UARTS
- * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
- * "mediatek,mt8186-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
- * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS
- * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS
- * "mediatek,mt8516-uart" for MT8516 compatible UARTS
- * "mediatek,mt6577-uart" for MT6577 and all of the above
-
-- reg: The base address of the UART register bank.
-
-- interrupts:
- index 0: an interrupt specifier for the UART controller itself
- index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to
- support Rx in-band wake up. If one would like to use this feature,
- one must create an addtional pinctrl to reconfigure Rx pin to normal
- GPIO before suspend.
-
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names:
- - "baud": The clock the baudrate is derived from
- - "bus": The bus clock for register accesses (optional)
-
-For compatibility with older device trees an unnamed clock is used for the
-baud clock if the baudclk does not exist. Do not use this for new designs.
-
-Example:
-
- uart0: serial at 11006000 {
- compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
- reg = <0x11006000 0x400>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
- clocks = <&uart_clk>, <&bus_clk>;
- clock-names = "baud", "bus";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&uart_pin>;
- pinctrl-1 = <&uart_pin_sleep>;
- };
--
2.35.1
More information about the Linux-mediatek
mailing list