[PATCH v6 2/7] dt-bindings: thermal: Add binding document for mt6873 thermal controller

[Krzysztof Kozlowski]

On 12/05/2022 14:24, Alexandre Bailon wrote:
> From: Michael Kao <michael.kao at mediatek.com>
> 
> This patch adds binding document for mt6873 thermal controller.

Thank you for your patch. There is something to discuss/improve.

> 
> Signed-off-by: Michael Kao <michael.kao at mediatek.com>
> Signed-off-by: Ben Tseng <ben.tseng at mediatek.com>
> ---
>  .../thermal/mediatek-thermal-lvts.yaml        | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml
> new file mode 100644
> index 000000000000..69ffe7b14c21
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal-lvts.yaml

filename: vendor,device
so something like mediatek,mt6873-lvts.yaml or
mediatek,mt6873-lvts-thermal.yaml

> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/mediatek-thermal-lvts.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek SoC LVTS thermal controller (DTS) binding

s/(DTS) binding//
(unless DTS means something related to hardware)

> +
> +maintainers:
> +  - Yu-Chia Chang <ethan.chang at mediatek.com>
> +  - Ben Tseng <ben.tseng at mediatek.com>
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt6873-lvts
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: lvts_clk

Skip "_clk" suffix, so just lvts.

> +
> +  "#thermal-sensor-cells":
> +    const: 0
> +
> +required:
> +  - "#thermal-sensor-cells"
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names

You should reference in allOf therma-sensor.yaml unless this is not a
thermal sensor?

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/thermal/thermal.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/mt8192-clk.h>
> +    dts: lvts at 1100b000 {

Generic node name, so thermal-sensor

> +        compatible = "mediatek,mt6873-lvts";
> +        reg = <0x1100b000 0x1000>;
> +        clocks = <&infracfg CLK_INFRA_THERM>;
> +        clock-names = "lvts_clk";
> +        #thermal-sensor-cells = <0>;
> +        interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
> +    };
> +
> +    thermal-zones {
> +        cpu_thermal: cpu-thermal {
> +            polling-delay-passive = <0>;
> +            polling-delay = <0>;
> +
> +            thermal-sensors = <&dts>;
> +            trips {
> +                cpu_alert1: cpu-alert1 {
> +                    temperature = <85000>;
> +                    hysteresis = <0>;
> +                    type = "passive";
> +                };
> +
> +                cpu_crit: cpu-crit {
> +                    temperature = <120000>;
> +                    hysteresis = <0>;
> +                    type = "critical";
> +                };
> +            };
> +
> +            cooling-maps {
> +            };

Empty node? Is it used anyhow here?

> +        };
> +    };
> +...


Best regards,
Krzysztof