[PATCH v12, 00/17] media: mtk-vcodec: support for M8192 decoder
Yunfei Dong
yunfei.dong at mediatek.com
Wed May 11 19:19:33 PDT 2022
This series adds support for mt8192 h264/vp8/vp9 decoder drivers. Firstly, refactor
power/clock/interrupt interfaces for mt8192 is lat and core architecture.
Secondly, add new functions to get frame buffer size and resolution according
to decoder capability from scp side. Then add callback function to get/put
capture buffer in order to enable lat and core decoder in parallel, need to
adjust GStreamer at the same time.
Then add to support MT21C compressed mode and fix v4l2-compliance fail.
Next, extract H264 request api driver to let mt8183 and mt8192 use the same
code, and adds mt8192 frame based h264 driver for stateless decoder.
Lastly, add vp8 and vp9 stateless decoder drivers.
Patches 1 refactor power/clock/interrupt interface.
Patches 2~4 get frame buffer size and resolution according to decoder capability.
Patches 5 set capture queue bytesused.
Patches 6 adjust GStreamer.
Patch 7~11 add to support MT21C compressed mode and fix v4l2-compliance fail.
patch 12 record capture queue format type.
Patch 13~14 extract h264 driver and add mt8192 frame based driver for h264 decoder.
Patch 15~16 add vp8 and vp9 stateless decoder drivers.
Patch 17 prevent kernel crash when rmmod mtk-vcodec-dec.ko
---
changes compared with v11:
- fix __iomem not reasonable, align share memory to dram.
changes compared with v10:
- fix sparse and smatch check fail for patch 13/14/16
- fix 32bit build fail for patch 14
changes compared with v9:
- fix kernel robot build fail for patch 16
changes compared with v8:
- fix vp9 build error
- fix kernel-doc fail
changes compared with v7:
- adjust GStreamer, separate src buffer done with v4l2_ctrl_request_complete for patch 6.
- remove v4l2_m2m_set_dst_buffered.
- add new patch to set each plane bytesused in buf prepare for patch 5.
- using upstream interface to update vp9 prob tables for patch 16.
- fix maintainer comments.
- test the driver with chrome VD and GStreamer(H264/VP9/VP8/AV1).
changes compared with v6:
- rebase to the latest media stage and fix conficts
- fix memcpy to memcpy_fromio or memcpy_toio
- fix h264 crash when test field bitstream
changes compared with v5:
- fix vp9 comments for patch 15
- fix vp8 comments for patch 14.
- fix comments for patch 12.
- fix build errors.
changes compared with v4:
- fix checkpatch.pl fail.
- fix kernel-doc fail.
- rebase to the latest media codec driver.
changes compared with v3:
- remove enum mtk_chip for patch 2.
- add vp8 stateless decoder drivers for patch 14.
- add vp9 stateless decoder drivers for patch 15.
changes compared with v2:
- add new patch 11 to record capture queue format type.
- separate patch 4 according to tzung-bi's suggestion.
- re-write commit message for patch 5 according to tzung-bi's suggestion.
changes compared with v1:
- rewrite commit message for patch 12.
- rewrite cover-letter message.
---
Yunfei Dong (17):
media: mediatek: vcodec: Add vdec enable/disable hardware helpers
media: mediatek: vcodec: Using firmware type to separate different
firmware architecture
media: mediatek: vcodec: get capture queue buffer size from scp
media: mediatek: vcodec: Read max resolution from dec_capability
media: mediatek: vcodec: set each plane bytesused in buf prepare
media: mediatek: vcodec: Refactor get and put capture buffer flow
media: mediatek: vcodec: Refactor supported vdec formats and
framesizes
media: mediatek: vcodec: Getting supported decoder format types
media: mediatek: vcodec: Add format to support MT21C
media: mediatek: vcodec: disable vp8 4K capability
media: mediatek: vcodec: Fix v4l2-compliance fail
media: mediatek: vcodec: record capture queue format type
media: mediatek: vcodec: Extract H264 common code
media: mediatek: vcodec: support stateless H.264 decoding for mt8192
media: mediatek: vcodec: support stateless VP8 decoding
media: mediatek: vcodec: support stateless VP9 decoding
media: mediatek: vcodec: prevent kernel crash when rmmod
mtk-vcodec-dec.ko
.../media/platform/mediatek/vcodec/Kconfig | 1 +
.../media/platform/mediatek/vcodec/Makefile | 4 +
.../platform/mediatek/vcodec/mtk_vcodec_dec.c | 62 +-
.../mediatek/vcodec/mtk_vcodec_dec_drv.c | 8 +-
.../mediatek/vcodec/mtk_vcodec_dec_pm.c | 166 +-
.../mediatek/vcodec/mtk_vcodec_dec_pm.h | 6 +-
.../mediatek/vcodec/mtk_vcodec_dec_stateful.c | 19 +-
.../vcodec/mtk_vcodec_dec_stateless.c | 257 ++-
.../platform/mediatek/vcodec/mtk_vcodec_drv.h | 41 +-
.../mediatek/vcodec/mtk_vcodec_enc_drv.c | 5 -
.../platform/mediatek/vcodec/mtk_vcodec_fw.c | 6 +
.../platform/mediatek/vcodec/mtk_vcodec_fw.h | 1 +
.../vcodec/vdec/vdec_h264_req_common.c | 310 +++
.../vcodec/vdec/vdec_h264_req_common.h | 274 +++
.../mediatek/vcodec/vdec/vdec_h264_req_if.c | 438 +---
.../vcodec/vdec/vdec_h264_req_multi_if.c | 626 +++++
.../mediatek/vcodec/vdec/vdec_vp8_req_if.c | 437 ++++
.../vcodec/vdec/vdec_vp9_req_lat_if.c | 2030 +++++++++++++++++
.../platform/mediatek/vcodec/vdec_drv_if.c | 37 +-
.../platform/mediatek/vcodec/vdec_drv_if.h | 3 +
.../platform/mediatek/vcodec/vdec_ipi_msg.h | 36 +
.../platform/mediatek/vcodec/vdec_msg_queue.c | 2 +
.../platform/mediatek/vcodec/vdec_msg_queue.h | 2 +
.../platform/mediatek/vcodec/vdec_vpu_if.c | 53 +-
.../platform/mediatek/vcodec/vdec_vpu_if.h | 15 +
.../platform/mediatek/vcodec/venc_vpu_if.c | 2 +-
include/linux/remoteproc/mtk_scp.h | 2 +
27 files changed, 4242 insertions(+), 601 deletions(-)
create mode 100644 drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_common.c
create mode 100644 drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_common.h
create mode 100644 drivers/media/platform/mediatek/vcodec/vdec/vdec_h264_req_multi_if.c
create mode 100644 drivers/media/platform/mediatek/vcodec/vdec/vdec_vp8_req_if.c
create mode 100644 drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c
--
2.18.0
More information about the Linux-mediatek
mailing list