[PATCH v3 2/2] PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver

Johnson Wang johnson.wang at mediatek.com
Sun May 8 22:57:42 PDT 2022


On Sat, 2022-05-07 at 22:53 +0900, Chanwoo Choi wrote:
> On 22. 5. 6. 20:38, Johnson Wang wrote:
> > On Mon, 2022-04-25 at 20:55 +0800, Johnson Wang wrote:
> > > We introduce a devfreq driver for the MediaTek Cache Coherent
> > > Interconnect
> > > (CCI) used by some MediaTek SoCs.
> > > 
> > > In this driver, we use the passive devfreq driver to get target
> > > frequencies
> > > and adjust voltages accordingly. In MT8183 and MT8186, the
> > > MediaTek
> > > CCI
> > > is supplied by the same regulators with the little core CPUs.
> > > 
> > > Signed-off-by: Johnson Wang <johnson.wang at mediatek.com>
> > > Signed-off-by: Jia-Wei Chang <jia-wei.chang at mediatek.com>
> > > ---
> > > This patch depends on "devfreq-testing"[1].
> > > [1]
> > > 
https://urldefense.com/v3/__https://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git/log/?h=devfreq-testing__;!!CTRNKA9wMg0ARbw!wnTkI_sh3TsliBPFP70DFwtSZGtKyPinFu9h2BwULWX-xrWF0C21rLV-n1HhstfmLw42$
> > >  
> > > ---
> > >   drivers/devfreq/Kconfig           |  10 +
> > >   drivers/devfreq/Makefile          |   1 +
> > >   drivers/devfreq/mtk-cci-devfreq.c | 474
> > > ++++++++++++++++++++++++++++++
> > >   3 files changed, 485 insertions(+)
> > >   create mode 100644 drivers/devfreq/mtk-cci-devfreq.c
> > > 
> > > diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> > > index 87eb2b837e68..9754d8b31621 100644
> > > --- a/drivers/devfreq/Kconfig
> > > +++ b/drivers/devfreq/Kconfig
> > > @@ -120,6 +120,16 @@ config ARM_TEGRA_DEVFREQ
> > >   	  It reads ACTMON counters of memory controllers and
> > > adjusts
> > > the
> > >   	  operating frequencies and voltages with OPP support.
> > >   
> > > +config ARM_MEDIATEK_CCI_DEVFREQ
> > > +	tristate "MEDIATEK CCI DEVFREQ Driver"
> > > +	depends on ARM_MEDIATEK_CPUFREQ || COMPILE_TEST
> > > +	select DEVFREQ_GOV_PASSIVE
> > > +	help
> > > +	  This adds a devfreq driver for MediaTek Cache Coherent
> > > Interconnect
> > > +	  which is shared the same regulators with the cpu cluster. It
> > > can track
> > > +	  buck voltages and update a proper CCI frequency. Use the
> > > notification
> > > +	  to get the regulator status.
> > > +
> > >   config ARM_RK3399_DMC_DEVFREQ
> > >   	tristate "ARM RK3399 DMC DEVFREQ Driver"
> > >   	depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \
> > > diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
> > > index 0b6be92a25d9..bf40d04928d0 100644
> > > --- a/drivers/devfreq/Makefile
> > > +++ b/drivers/devfreq/Makefile
> > > @@ -11,6 +11,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+=
> > > governor_passive.o
> > >   obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
> > >   obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ)	+= imx-bus.o
> > >   obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ)	+= imx8m-ddrc.o
> > > +obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ)	+= mtk-cci-devfreq.o
> > >   obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
> > >   obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ)	+= sun8i-a33-
> > > mbus.o
> > >   obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
> > > diff --git a/drivers/devfreq/mtk-cci-devfreq.c
> > > b/drivers/devfreq/mtk-
> > > cci-devfreq.c
> > > new file mode 100644
> > > index 000000000000..b3e31c45a57c
> > > --- /dev/null
> > > +++ b/drivers/devfreq/mtk-cci-devfreq.c
> > > @@ -0,0 +1,474 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (C) 2022 MediaTek Inc.
> > > + */
> > > +
> > > +#include <linux/clk.h>
> > > +#include <linux/devfreq.h>
> > > +#include <linux/minmax.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/pm_opp.h>
> > > +#include <linux/regulator/consumer.h>
> > > +
> > > +struct mtk_ccifreq_platform_data {
> > > +	int min_volt_shift;
> > > +	int max_volt_shift;
> > > +	int proc_max_volt;
> > > +	int sram_min_volt;
> > > +	int sram_max_volt;
> > > +};
> > > +
> > > +struct mtk_ccifreq_drv {
> > > +	struct device *dev;
> > > +	struct devfreq *devfreq;
> > > +	struct regulator *proc_reg;
> > > +	struct regulator *sram_reg;
> > > +	struct clk *cci_clk;
> > > +	struct clk *inter_clk;
> > > +	int inter_voltage;
> > > +	int pre_voltage;
> > > +	unsigned long pre_freq;
> > > +	/* Avoid race condition for regulators between notify and
> > > policy */
> > > +	struct mutex reg_lock;
> > > +	struct notifier_block opp_nb;
> > > +	const struct mtk_ccifreq_platform_data *soc_data;
> > > +	int vtrack_max;
> > > +};
> > > +
> > > +static int mtk_ccifreq_set_voltage(struct mtk_ccifreq_drv *drv,
> > > int
> > > new_voltage)
> > > +{
> > > +	const struct mtk_ccifreq_platform_data *soc_data = drv-
> > > > soc_data;
> > > 
> > > +	struct device *dev = drv->dev;
> > > +	int pre_voltage, pre_vsram, new_vsram, vsram, voltage, ret;
> > > +	int retry_max = drv->vtrack_max;
> > > +
> > > +	if (!drv->sram_reg) {
> > > +		ret = regulator_set_voltage(drv->proc_reg, new_voltage,
> > > +					    drv->soc_data-
> > > > proc_max_volt);
> > > 
> > > +		goto out_set_voltage;
> > > +	}
> > > +
> > > +	pre_voltage = regulator_get_voltage(drv->proc_reg);
> > > +	if (pre_voltage < 0) {
> > > +		dev_err(dev, "invalid vproc value: %d\n", pre_voltage);
> > > +		return pre_voltage;
> > > +	}
> > > +
> > > +	pre_vsram = regulator_get_voltage(drv->sram_reg);
> > > +	if (pre_vsram < 0) {
> > > +		dev_err(dev, "invalid vsram value: %d\n", pre_vsram);
> > > +		return pre_vsram;
> > > +	}
> > > +
> > > +	new_vsram = clamp(new_voltage + soc_data->min_volt_shift,
> > > +			  soc_data->sram_min_volt, soc_data-
> > > > sram_max_volt);
> > > 
> > > +
> > > +	do {
> > > +		if (pre_voltage <= new_voltage) {
> > > +			vsram = clamp(pre_voltage + soc_data-
> > > > max_volt_shift,
> > > 
> > > +				      soc_data->sram_min_volt,
> > > new_vsram);
> > > +			ret = regulator_set_voltage(drv->sram_reg,
> > > vsram,
> > > +						    soc_data-
> > > > sram_max_volt);
> > > 
> > > +			if (ret)
> > > +				return ret;
> > > +
> > > +			if (vsram == soc_data->sram_max_volt ||
> > > +			    new_vsram == soc_data->sram_min_volt)
> > > +				voltage = new_voltage;
> > > +			else
> > > +				voltage = vsram - soc_data-
> > > > min_volt_shift;
> > > 
> > > +
> > > +			ret = regulator_set_voltage(drv->proc_reg,
> > > voltage,
> > > +						    soc_data-
> > > > proc_max_volt);
> > > 
> > > +			if (ret) {
> > > +				regulator_set_voltage(drv->sram_reg,
> > > pre_vsram,
> > > +						      soc_data-
> > > > sram_max_volt);
> > > 
> > > +				return ret;
> > > +			}
> > > +		} else if (pre_voltage > new_voltage) {
> > > +			voltage = max(new_voltage,
> > > +				      pre_vsram - soc_data-
> > > > max_volt_shift);
> > > 
> > > +			ret = regulator_set_voltage(drv->proc_reg,
> > > voltage,
> > > +						    soc_data-
> > > > proc_max_volt);
> > > 
> > > +			if (ret)
> > > +				return ret;
> > > +
> > > +			if (voltage == new_voltage)
> > > +				vsram = new_vsram;
> > > +			else
> > > +				vsram = max(new_vsram,
> > > +					    voltage + soc_data-
> > > > min_volt_shift);
> > > 
> > > +
> > > +			ret = regulator_set_voltage(drv->sram_reg,
> > > vsram,
> > > +						    soc_data-
> > > > sram_max_volt);
> > > 
> > > +			if (ret) {
> > > +				regulator_set_voltage(drv->proc_reg,
> > > pre_voltage,
> > > +						      soc_data-
> > > > proc_max_volt);
> > > 
> > > +				return ret;
> > > +			}
> > > +		}
> > > +
> > > +		pre_voltage = voltage;
> > > +		pre_vsram = vsram;
> > > +
> > > +		if (--retry_max < 0) {
> > > +			dev_err(dev,
> > > +				"over loop count, failed to set
> > > voltage\n");
> > > +			return -EINVAL;
> > > +		}
> > > +	} while (voltage != new_voltage || vsram != new_vsram);
> > > +
> > > +out_set_voltage:
> > > +	if (!ret)
> > > +		drv->pre_voltage = new_voltage;
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int mtk_ccifreq_target(struct device *dev, unsigned long
> > > *freq,
> > > +			      u32 flags)
> > > +{
> > > +	struct mtk_ccifreq_drv *drv = dev_get_drvdata(dev);
> > > +	struct clk *cci_pll = clk_get_parent(drv->cci_clk);
> > > +	struct dev_pm_opp *opp;
> > > +	unsigned long opp_rate;
> > > +	int voltage, pre_voltage, inter_voltage, target_voltage, ret;
> > > +
> > > +	if (!drv)
> > > +		return -EINVAL;
> > > +
> > > +	if (drv->pre_freq == *freq)
> > > +		return 0;
> > > +
> > > +	inter_voltage = drv->inter_voltage;
> > > +
> > > +	opp_rate = *freq;
> > > +	opp = devfreq_recommended_opp(dev, &opp_rate, 1);
> > > +	if (IS_ERR(opp)) {
> > > +		dev_err(dev, "failed to find opp for freq: %ld\n",
> > > opp_rate);
> > > +		return PTR_ERR(opp);
> > > +	}
> > > +
> > > +	mutex_lock(&drv->reg_lock);
> > > +
> > > +	voltage = dev_pm_opp_get_voltage(opp);
> > > +	dev_pm_opp_put(opp);
> > > +
> > > +	if (unlikely(drv->pre_voltage <= 0))
> > > +		pre_voltage = regulator_get_voltage(drv->proc_reg);
> > > +	else
> > > +		pre_voltage = drv->pre_voltage;
> > > +
> > > +	if (pre_voltage < 0) {
> > > +		dev_err(dev, "invalid vproc value: %d\n", pre_voltage);
> > > +		return pre_voltage;
> > > +	}
> > > +
> > > +	/* scale up: set voltage first then freq. */
> > > +	target_voltage = max(inter_voltage, voltage);
> > > +	if (pre_voltage <= target_voltage) {
> > > +		ret = mtk_ccifreq_set_voltage(drv, target_voltage);
> > > +		if (ret) {
> > > +			dev_err(dev, "failed to scale up voltage\n");
> > > +			goto out_restore_voltage;
> > > +		}
> > > +	}
> > > +
> > > +	/* switch the cci clock to intermediate clock source. */
> > > +	ret = clk_set_parent(drv->cci_clk, drv->inter_clk);
> > > +	if (ret) {
> > > +		dev_err(dev, "failed to re-parent cci clock\n");
> > > +		goto out_restore_voltage;
> > > +	}
> > > +
> > > +	/* set the original clock to target rate. */
> > > +	ret = clk_set_rate(cci_pll, *freq);
> > > +	if (ret) {
> > > +		dev_err(dev, "failed to set cci pll rate: %d\n", ret);
> > > +		clk_set_parent(drv->cci_clk, cci_pll);
> > > +		goto out_restore_voltage;
> > > +	}
> > > +
> > > +	/* switch the cci clock back to the original clock source. */
> > > +	ret = clk_set_parent(drv->cci_clk, cci_pll);
> > > +	if (ret) {
> > > +		dev_err(dev, "failed to re-parent cci clock\n");
> > > +		mtk_ccifreq_set_voltage(drv, inter_voltage);
> > > +		goto out_unlock;
> > > +	}
> > > +
> > > +	/*
> > > +	 * If the new voltage is lower than the intermediate voltage or
> > > the
> > > +	 * original voltage, scale down to the new voltage.
> > > +	 */
> > > +	if (voltage < inter_voltage || voltage < pre_voltage) {
> > > +		ret = mtk_ccifreq_set_voltage(drv, voltage);
> > > +		if (ret) {
> > > +			dev_err(dev, "failed to scale down voltage\n");
> > > +			goto out_unlock;
> > > +		}
> > > +	}
> > > +
> > > +	drv->pre_freq = *freq;
> > > +	mutex_unlock(&drv->reg_lock);
> > > +
> > > +	return 0;
> > > +
> > > +out_restore_voltage:
> > > +	mtk_ccifreq_set_voltage(drv, pre_voltage);
> > > +
> > > +out_unlock:
> > > +	mutex_unlock(&drv->reg_lock);
> > > +	return ret;
> > > +}
> > > +
> > > +static int mtk_ccifreq_opp_notifier(struct notifier_block *nb,
> > > +				    unsigned long event, void *data)
> > > +{
> > > +	struct dev_pm_opp *opp = data;
> > > +	struct mtk_ccifreq_drv *drv;
> > > +	unsigned long freq, volt;
> > > +
> > > +	drv = container_of(nb, struct mtk_ccifreq_drv, opp_nb);
> > > +
> > > +	if (event == OPP_EVENT_ADJUST_VOLTAGE) {
> > > +		freq = dev_pm_opp_get_freq(opp);
> > > +
> > > +		mutex_lock(&drv->reg_lock);
> > > +		/* current opp item is changed */
> > > +		if (freq == drv->pre_freq) {
> > > +			volt = dev_pm_opp_get_voltage(opp);
> > > +			mtk_ccifreq_set_voltage(drv, volt);
> > > +		}
> > > +		mutex_unlock(&drv->reg_lock);
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static struct devfreq_dev_profile mtk_ccifreq_profile = {
> > > +	.target = mtk_ccifreq_target,
> > > +};
> > > +
> > > +static int mtk_ccifreq_probe(struct platform_device *pdev)
> > > +{
> > > +	struct device *dev = &pdev->dev;
> > > +	struct mtk_ccifreq_drv *drv;
> > > +	struct devfreq_passive_data *passive_data;
> > > +	struct dev_pm_opp *opp;
> > > +	unsigned long rate, opp_volt;
> > > +	int ret;
> > > +
> > > +	drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
> > > +	if (!drv)
> > > +		return -ENOMEM;
> > > +
> > > +	drv->dev = dev;
> > > +	drv->soc_data = (const struct mtk_ccifreq_platform_data *)
> > > +				of_device_get_match_data(&pdev->dev);
> > > +	mutex_init(&drv->reg_lock);
> > > +	platform_set_drvdata(pdev, drv);
> > > +
> > > +	drv->cci_clk = devm_clk_get(dev, "cci");
> > > +	if (IS_ERR(drv->cci_clk)) {
> > > +		ret = PTR_ERR(drv->cci_clk);
> > > +		return dev_err_probe(dev, ret,
> > > +				     "failed to get cci clk: %d\n",
> > > ret);
> > > +	}
> > > +
> > > +	drv->inter_clk = devm_clk_get(dev, "intermediate");
> > > +	if (IS_ERR(drv->inter_clk)) {
> > > +		ret = PTR_ERR(drv->inter_clk);
> > > +		dev_err_probe(dev, ret,
> > > +			      "failed to get intermediate clk: %d\n",
> > > ret);
> > > +		goto out_free_resources;
> > > +	}
> > > +
> > > +	drv->proc_reg = devm_regulator_get_optional(dev, "proc");
> > > +	if (IS_ERR(drv->proc_reg)) {
> > > +		ret = PTR_ERR(drv->proc_reg);
> > > +		dev_err_probe(dev, ret,
> > > +			      "failed to get proc regulator: %d\n",
> > > ret);
> > > +		goto out_free_resources;
> > > +	}
> > > +
> > > +	ret = regulator_enable(drv->proc_reg);
> > > +	if (ret) {
> > > +		dev_err(dev, "failed to enable proc regulator\n");
> > > +		goto out_free_resources;
> > > +	}
> > > +
> > > +	drv->sram_reg = regulator_get_optional(dev, "sram");
> > > +	if (IS_ERR(drv->sram_reg))
> > > +		drv->sram_reg = NULL;
> > > +	else {
> > > +		ret = regulator_enable(drv->sram_reg);
> > > +		if (ret) {
> > > +			dev_err(dev, "failed to enable sram
> > > regulator\n");
> > > +			goto out_free_resources;
> > > +		}
> > > +	}
> > > +
> > > +	/*
> > > +	 * We assume min voltage is 0 and tracking target voltage using
> > > +	 * min_volt_shift for each iteration.
> > > +	 * The retry_max is 3 times of expeted iteration count.
> > > +	 */
> > > +	drv->vtrack_max = 3 * DIV_ROUND_UP(max(drv->soc_data-
> > > > sram_max_volt,
> > > 
> > > +					       drv->soc_data-
> > > > proc_max_volt),
> > > 
> > > +					   drv->soc_data-
> > > > min_volt_shift);
> > > 
> > > +
> > > +	ret = clk_prepare_enable(drv->cci_clk);
> > > +	if (ret)
> > > +		goto out_free_resources;
> > > +
> > > +	ret = clk_prepare_enable(drv->inter_clk);
> > > +	if (ret)
> > > +		goto out_disable_cci_clk;
> > > +
> > > +	ret = dev_pm_opp_of_add_table(dev);
> > > +	if (ret) {
> > > +		dev_err(dev, "failed to add opp table: %d\n", ret);
> > > +		goto out_disable_inter_clk;
> > > +	}
> > > +
> > > +	rate = clk_get_rate(drv->inter_clk);
> > > +	opp = dev_pm_opp_find_freq_ceil(dev, &rate);
> > > +	if (IS_ERR(opp)) {
> > > +		ret = PTR_ERR(opp);
> > > +		dev_err(dev, "failed to get intermediate opp: %d\n",
> > > ret);
> > > +		goto out_remove_opp_table;
> > > +	}
> > > +	drv->inter_voltage = dev_pm_opp_get_voltage(opp);
> > > +	dev_pm_opp_put(opp);
> > > +
> > > +	rate = U32_MAX;
> > > +	opp = dev_pm_opp_find_freq_floor(drv->dev, &rate);
> > > +	if (IS_ERR(opp)) {
> > > +		dev_err(dev, "failed to get opp\n");
> > > +		ret = PTR_ERR(opp);
> > > +		goto out_remove_opp_table;
> > > +	}
> > > +
> > > +	opp_volt = dev_pm_opp_get_voltage(opp);
> > > +	dev_pm_opp_put(opp);
> > > +	ret = mtk_ccifreq_set_voltage(drv, opp_volt);
> > > +	if (ret) {
> > > +		dev_err(dev, "failed to scale to highest voltage %lu in
> > > proc_reg\n",
> > > +			opp_volt);
> > > +		goto out_remove_opp_table;
> > > +	}
> > > +
> > > +	passive_data = devm_kzalloc(dev, sizeof(struct
> > > devfreq_passive_data),
> > > +				    GFP_KERNEL);
> > > +	if (!passive_data) {
> > > +		ret = -ENOMEM;
> > > +		goto out_remove_opp_table;
> > > +	}
> > > +
> > > +	passive_data->parent_type = CPUFREQ_PARENT_DEV;
> > > +	drv->devfreq = devm_devfreq_add_device(dev,
> > > &mtk_ccifreq_profile,
> > > +					       DEVFREQ_GOV_PASSIVE,
> > > +					       passive_data);
> > > +	if (IS_ERR(drv->devfreq)) {
> > > +		ret = -EPROBE_DEFER;
> > > +		dev_err(dev, "failed to add devfreq device: %d\n",
> > > +			PTR_ERR(drv->devfreq));
> > > +		goto out_remove_opp_table;
> > > +	}
> > > +
> > > +	drv->opp_nb.notifier_call = mtk_ccifreq_opp_notifier;
> > > +	ret = dev_pm_opp_register_notifier(dev, &drv->opp_nb);
> > > +	if (ret) {
> > > +		dev_err(dev, "failed to register opp notifier: %d\n",
> > > ret);
> > > +		goto out_remove_devfreq_device;
> > > +	}
> > > +	return 0;
> > > +
> > > +out_remove_devfreq_device:
> > > +	devm_devfreq_remove_device(dev, drv->devfreq);
> > > +
> > > +out_remove_opp_table:
> > > +	dev_pm_opp_of_remove_table(dev);
> > > +
> > > +out_disable_inter_clk:
> > > +	clk_disable_unprepare(drv->inter_clk);
> > > +
> > > +out_disable_cci_clk:
> > > +	clk_disable_unprepare(drv->cci_clk);
> > > +
> > > +out_free_resources:
> > > +	if (regulator_is_enabled(drv->proc_reg))
> > > +		regulator_disable(drv->proc_reg);
> > > +	if (drv->sram_reg && regulator_is_enabled(drv->sram_reg))
> > > +		regulator_disable(drv->sram_reg);
> > > +
> > > +	if (!IS_ERR(drv->proc_reg))
> > > +		regulator_put(drv->proc_reg);
> > > +	if (!IS_ERR(drv->sram_reg))
> > > +		regulator_put(drv->sram_reg);
> > > +	if (!IS_ERR(drv->cci_clk))
> > > +		clk_put(drv->cci_clk);
> > > +	if (!IS_ERR(drv->inter_clk))
> > > +		clk_put(drv->inter_clk);
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int mtk_ccifreq_remove(struct platform_device *pdev)
> > > +{
> > > +	struct device *dev = &pdev->dev;
> > > +	struct mtk_ccifreq_drv *drv;
> > > +
> > > +	drv = platform_get_drvdata(pdev);
> > > +
> > > +	dev_pm_opp_unregister_notifier(dev, &drv->opp_nb);
> > > +	dev_pm_opp_of_remove_table(dev);
> > > +	clk_disable_unprepare(drv->inter_clk);
> > > +	clk_disable_unprepare(drv->cci_clk);
> > > +	regulator_disable(drv->proc_reg);
> > > +	if (drv->sram_reg)
> > > +		regulator_disable(drv->sram_reg);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static const struct mtk_ccifreq_platform_data
> > > mt8183_platform_data =
> > > {
> > > +	.min_volt_shift = 100000,
> > > +	.max_volt_shift = 200000,
> > > +	.proc_max_volt = 1150000,
> > > +	.sram_min_volt = 0,
> > > +	.sram_max_volt = 1150000,
> > > +};
> > > +
> > > +static const struct mtk_ccifreq_platform_data
> > > mt8186_platform_data =
> > > {
> > > +	.min_volt_shift = 100000,
> > > +	.max_volt_shift = 250000,
> > > +	.proc_max_volt = 1118750,
> > > +	.sram_min_volt = 850000,
> > > +	.sram_max_volt = 1118750,
> > > +};
> > > +
> > > +static const struct of_device_id mtk_ccifreq_machines[] = {
> > > +	{ .compatible = "mediatek,mt8183-cci", .data =
> > > &mt8183_platform_data },
> > > +	{ .compatible = "mediatek,mt8186-cci", .data =
> > > &mt8186_platform_data },
> > > +	{ },
> > > +};
> > > +MODULE_DEVICE_TABLE(of, mtk_ccifreq_machines);
> > > +
> > > +static struct platform_driver mtk_ccifreq_platdrv = {
> > > +	.probe	= mtk_ccifreq_probe,
> > > +	.remove	= mtk_ccifreq_remove,
> > > +	.driver = {
> > > +		.name = "mtk-ccifreq",
> > > +		.of_match_table = mtk_ccifreq_machines,
> > > +	},
> > > +};
> > > +module_platform_driver(mtk_ccifreq_platdrv);
> > > +
> > > +MODULE_DESCRIPTION("MediaTek CCI devfreq driver");
> > > +MODULE_AUTHOR("Jia-Wei Chang <jia-wei.chang at mediatek.com>");
> > > +MODULE_LICENSE("GPL v2");
> > 
> > Hi Chanwoo,
> > 
> > Just a kindly ping.
> > Could you please give me some suggestion on this patch?
> > Thanks!
> > 
> > BRs,
> > Johnson Wang
> > 
> 
> Hi Johnson,
> 
> Sorry for late reply.But I replied it yesterday as following:
> Maybe, this reply[1] has not yet arrrived at your mail box.
> [1] 
> 
https://lore.kernel.org/lkml/0846a062-2ea2-e6d4-03c8-992c2f2e24a0@gmail.com/T/#m3bc609d805d6e74ec7a105be0511926b4afbbaef
> 
> As I described on reply[1], I updated the patches on devfreq-testing
> branch. Could you please test your patches based on devfreq-testing
> branch?
> 

Hi Chanwoo,

Thanks for your information.
I've tested this patch based on the latest devfreq-testing branch.
It encounters the same crash as Chen-Yu mentioned[1].

[1]https://lore.kernel.org/linux-pm/YniX1w+oI1eOCmCx@google.com/T/#u


BRs,
Johnson Wang




More information about the Linux-mediatek mailing list