[PATCH net-next 01/14] arm64: dts: mediatek: mt7986: introduce ethernet nodes

[Lorenzo Bianconi]

Introduce ethernet nodes in mt7986 bindings in order to
enable mt7986a/mt7986b ethernet support.

Co-developed-by: Sam Shih <sam.shih at mediatek.com>
Signed-off-by: Sam Shih <sam.shih at mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
---
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 95 ++++++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 39 ++++++++
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 91 +++++++++++++++++++
 3 files changed, 225 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 21e420829572..c5a4e999234c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -25,6 +25,101 @@ memory at 40000000 {
 	};
 };
 
+&eth {
+	status = "okay";
+
+	gmac0: mac at 0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac at 1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	phy5: phy at 5 {
+		compatible = "ethernet-phy-id67c9.de0a";
+		reg = <5>;
+		reset-gpios = <&pio 6 1>;
+		reset-deassert-us = <20000>;
+		phy-mode = "2500base-x";
+	};
+
+	phy6: phy at 6 {
+		compatible = "ethernet-phy-id67c9.de0a";
+		reg = <6>;
+		phy-mode = "2500base-x";
+	};
+
+	switch: switch at 0 {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		reset-gpios = <&pio 5 0>;
+	};
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			reg = <0>;
+			label = "lan0";
+		};
+
+		port at 1 {
+			reg = <1>;
+			label = "lan1";
+		};
+
+		port at 2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port at 3 {
+			reg = <3>;
+			label = "lan3";
+		};
+
+		port at 6 {
+			reg = <6>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 694acf8f5b70..d2636a0ed152 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -222,6 +222,45 @@ ethsys: syscon at 15000000 {
 			 #reset-cells = <1>;
 		};
 
+		eth: ethernet at 15100000 {
+			compatible = "mediatek,mt7986-eth";
+			reg = <0 0x15100000 0 0x80000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ethsys CLK_ETH_FE_EN>,
+				 <&ethsys CLK_ETH_GP2_EN>,
+				 <&ethsys CLK_ETH_GP1_EN>,
+				 <&ethsys CLK_ETH_WOCPU1_EN>,
+				 <&ethsys CLK_ETH_WOCPU0_EN>,
+				 <&sgmiisys0 CLK_SGMII0_TX250M_EN>,
+				 <&sgmiisys0 CLK_SGMII0_RX250M_EN>,
+				 <&sgmiisys0 CLK_SGMII0_CDR_REF>,
+				 <&sgmiisys0 CLK_SGMII0_CDR_FB>,
+				 <&sgmiisys1 CLK_SGMII1_TX250M_EN>,
+				 <&sgmiisys1 CLK_SGMII1_RX250M_EN>,
+				 <&sgmiisys1 CLK_SGMII1_CDR_REF>,
+				 <&sgmiisys1 CLK_SGMII1_CDR_FB>,
+				 <&topckgen CLK_TOP_NETSYS_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_500M_SEL>;
+			clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
+				      "sgmii_tx250m", "sgmii_rx250m",
+				      "sgmii_cdr_ref", "sgmii_cdr_fb",
+				      "sgmii2_tx250m", "sgmii2_rx250m",
+				      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+				      "netsys0", "netsys1";
+			assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+					  <&topckgen CLK_TOP_SGM_325M_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+			#reset-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 	};
 
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index d73467ea3641..5ed275dcd3dc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -28,3 +28,94 @@ memory at 40000000 {
 &uart0 {
 	status = "okay";
 };
+
+&eth {
+	status = "okay";
+
+	gmac0: mac at 0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac at 1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy5: phy at 5 {
+			compatible = "ethernet-phy-id67c9.de0a";
+			reg = <5>;
+			reset-gpios = <&pio 6 1>;
+			reset-deassert-us = <20000>;
+			phy-mode = "2500base-x";
+		};
+
+		phy6: phy at 6 {
+			compatible = "ethernet-phy-id67c9.de0a";
+			reg = <6>;
+			phy-mode = "2500base-x";
+		};
+
+		switch at 0 {
+			compatible = "mediatek,mt7531";
+			reg = <31>;
+			reset-gpios = <&pio 5 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port at 1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port at 2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port at 3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port at 6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
-- 
2.35.1