[PATCH v2] arm64: dts: mt8192: Follow binding order for SCP registers
Matthias Brugger
matthias.bgg at gmail.com
Thu May 5 06:40:03 PDT 2022
On 04/05/2022 23:45, Nícolas F. R. A. Prado wrote:
> The dt-binding for SCP documents the reg-names order as sram, cfg,
> l1tcm. Update the SCP node on the mt8192 devicetree to follow that
> order, which gets rid of a dtbs_check warning. This doesn't change any
> behavior since the SCP driver accesses the memory regions through the
> names anyway.
>
> Fixes: c63556ec6bfe ("arm64: dts: mt8192: Add SCP node")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
>
Applied thanks!
> ---
>
> Changes in v2:
> - Added missing Fixes tag
>
> arch/arm64/boot/dts/mediatek/mt8192.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index 26dbe9ecc528..733aec2e7f77 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -699,9 +699,9 @@ spi7: spi at 1101e000 {
> scp: scp at 10500000 {
> compatible = "mediatek,mt8192-scp";
> reg = <0 0x10500000 0 0x100000>,
> - <0 0x10700000 0 0x8000>,
> - <0 0x10720000 0 0xe0000>;
> - reg-names = "sram", "l1tcm", "cfg";
> + <0 0x10720000 0 0xe0000>,
> + <0 0x10700000 0 0x8000>;
> + reg-names = "sram", "cfg", "l1tcm";
> interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>;
> clocks = <&infracfg CLK_INFRA_SCPSYS>;
> clock-names = "main";
More information about the Linux-mediatek
mailing list