[PATCH v5 3/9] cpufreq: mediatek: Move voltage limits to platform data

Viresh Kumar viresh.kumar at linaro.org
Thu May 5 01:52:00 PDT 2022


On 04-05-22, 21:05, Rex-BC Chen wrote:
> From: Jia-Wei Chang <jia-wei.chang at mediatek.com>
> 
> Voltages and shifts are defined as macros originally.
> There are different requirements of these values for each MediaTek SoCs.
> Therefore, we add the platform data and move these values into it.
> 
> Signed-off-by: Jia-Wei Chang <jia-wei.chang at mediatek.com>
> Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> ---
>  drivers/cpufreq/mediatek-cpufreq.c | 90 ++++++++++++++++++++----------
>  1 file changed, 61 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
> index 363ebecb2c80..80a3d4cd49ed 100644
> --- a/drivers/cpufreq/mediatek-cpufreq.c
> +++ b/drivers/cpufreq/mediatek-cpufreq.c
> @@ -10,15 +10,21 @@
>  #include <linux/cpumask.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> +#include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_opp.h>
>  #include <linux/regulator/consumer.h>
>  
> -#define MIN_VOLT_SHIFT		(100000)
> -#define MAX_VOLT_SHIFT		(200000)
> -#define MAX_VOLT_LIMIT		(1150000)
>  #define VOLT_TOL		(10000)
>  
> +struct mtk_cpufreq_platform_data {
> +	int min_volt_shift;
> +	int max_volt_shift;
> +	int proc_max_volt;
> +	int sram_min_volt;
> +	int sram_max_volt;
> +};
> +
>  /*
>   * The struct mtk_cpu_dvfs_info holds necessary information for doing CPU DVFS
>   * on each CPU power/clock domain of Mediatek SoCs. Each CPU cluster in
> @@ -46,8 +52,11 @@ struct mtk_cpu_dvfs_info {
>  	struct notifier_block opp_nb;
>  	unsigned int opp_cpu;
>  	unsigned long opp_freq;
> +	const struct mtk_cpufreq_platform_data *soc_data;
>  };
>  
> +static struct platform_device *cpufreq_pdev;
> +
>  static LIST_HEAD(dvfs_info_list);
>  
>  static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu)
> @@ -65,6 +74,7 @@ static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu)
>  static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
>  					int new_vproc)
>  {
> +	const struct mtk_cpufreq_platform_data *soc_data = info->soc_data;
>  	struct regulator *proc_reg = info->proc_reg;
>  	struct regulator *sram_reg = info->sram_reg;
>  	int pre_vproc, pre_vsram, new_vsram, vsram, vproc, ret;
> @@ -76,7 +86,8 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
>  		return pre_vproc;
>  	}
>  	/* Vsram should not exceed the maximum allowed voltage of SoC. */
> -	new_vsram = min(new_vproc + MIN_VOLT_SHIFT, MAX_VOLT_LIMIT);
> +	new_vsram = min(new_vproc + soc_data->min_volt_shift,
> +			soc_data->sram_max_volt);
>  
>  	if (pre_vproc < new_vproc) {
>  		/*
> @@ -99,10 +110,11 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
>  				return pre_vproc;
>  			}
>  
> -			vsram = min(new_vsram, pre_vproc + MAX_VOLT_SHIFT);
> +			vsram = min(new_vsram,
> +				    pre_vproc + soc_data->min_volt_shift);
>  
> -			if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) {
> -				vsram = MAX_VOLT_LIMIT;
> +			if (vsram + VOLT_TOL >= soc_data->sram_max_volt) {
> +				vsram = soc_data->sram_max_volt;
>  
>  				/*
>  				 * If the target Vsram hits the maximum voltage,
> @@ -120,7 +132,7 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
>  				ret = regulator_set_voltage(sram_reg, vsram,
>  							    vsram + VOLT_TOL);
>  
> -				vproc = vsram - MIN_VOLT_SHIFT;
> +				vproc = vsram - soc_data->min_volt_shift;
>  			}
>  			if (ret)
>  				return ret;
> @@ -154,7 +166,8 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
>  				return pre_vsram;
>  			}
>  
> -			vproc = max(new_vproc, pre_vsram - MAX_VOLT_SHIFT);
> +			vproc = max(new_vproc,
> +				    pre_vsram - soc_data->max_volt_shift);
>  			ret = regulator_set_voltage(proc_reg, vproc,
>  						    vproc + VOLT_TOL);
>  			if (ret)
> @@ -163,10 +176,11 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
>  			if (vproc == new_vproc)
>  				vsram = new_vsram;
>  			else
> -				vsram = max(new_vsram, vproc + MIN_VOLT_SHIFT);
> +				vsram = max(new_vsram,
> +					    vproc + soc_data->min_volt_shift);
>  
> -			if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) {
> -				vsram = MAX_VOLT_LIMIT;
> +			if (vsram + VOLT_TOL >= soc_data->sram_max_volt) {
> +				vsram = soc_data->sram_max_volt;
>  
>  				/*
>  				 * If the target Vsram hits the maximum voltage,
> @@ -197,13 +211,14 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
>  
>  static int mtk_cpufreq_set_voltage(struct mtk_cpu_dvfs_info *info, int vproc)
>  {
> +	const struct mtk_cpufreq_platform_data *soc_data = info->soc_data;
>  	int ret;
>  
>  	if (info->need_voltage_tracking)
>  		ret = mtk_cpufreq_voltage_tracking(info, vproc);
>  	else
>  		ret = regulator_set_voltage(info->proc_reg, vproc,
> -					    MAX_VOLT_LIMIT);
> +					    soc_data->proc_max_volt);
>  	if (!ret)
>  		info->pre_vproc = vproc;
>  
> @@ -583,9 +598,17 @@ static struct cpufreq_driver mtk_cpufreq_driver = {
>  
>  static int mtk_cpufreq_probe(struct platform_device *pdev)
>  {
> +	const struct of_device_id *match;
>  	struct mtk_cpu_dvfs_info *info, *tmp;
>  	int cpu, ret;
>  
> +	match = dev_get_platdata(&pdev->dev);
> +	if (!match || !match->data) {
> +		dev_err(&pdev->dev,
> +			"failed to get mtk cpufreq platform data\n");
> +		return -ENODEV;
> +	}
> +
>  	for_each_possible_cpu(cpu) {
>  		info = mtk_cpu_dvfs_info_lookup(cpu);
>  		if (info)
> @@ -597,6 +620,7 @@ static int mtk_cpufreq_probe(struct platform_device *pdev)
>  			goto release_dvfs_info_list;
>  		}
>  
> +		info->soc_data = match->data;
>  		ret = mtk_cpu_dvfs_info_init(info, cpu);
>  		if (ret) {
>  			dev_err(&pdev->dev,
> @@ -632,20 +656,27 @@ static struct platform_driver mtk_cpufreq_platdrv = {
>  	.probe		= mtk_cpufreq_probe,
>  };
>  
> +static const struct mtk_cpufreq_platform_data mt2701_platform_data = {
> +	.min_volt_shift = 100000,
> +	.max_volt_shift = 200000,
> +	.proc_max_volt = 1150000,
> +	.sram_min_volt = 0,
> +	.sram_max_volt = 1150000,
> +};
> +
>  /* List of machines supported by this driver */
>  static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
> -	{ .compatible = "mediatek,mt2701", },
> -	{ .compatible = "mediatek,mt2712", },
> -	{ .compatible = "mediatek,mt7622", },
> -	{ .compatible = "mediatek,mt7623", },
> -	{ .compatible = "mediatek,mt8167", },
> -	{ .compatible = "mediatek,mt817x", },
> -	{ .compatible = "mediatek,mt8173", },
> -	{ .compatible = "mediatek,mt8176", },
> -	{ .compatible = "mediatek,mt8183", },
> -	{ .compatible = "mediatek,mt8365", },
> -	{ .compatible = "mediatek,mt8516", },
> -
> +	{ .compatible = "mediatek,mt2701", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt2712", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt7622", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt7623", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt8167", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt817x", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt8173", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt8176", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt8183", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt8365", .data = &mt2701_platform_data },
> +	{ .compatible = "mediatek,mt8516", .data = &mt2701_platform_data },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, mtk_cpufreq_machines);
> @@ -654,7 +685,6 @@ static int __init mtk_cpufreq_driver_init(void)
>  {
>  	struct device_node *np;
>  	const struct of_device_id *match;
> -	struct platform_device *pdev;
>  	int err;
>  
>  	np = of_find_node_by_path("/");
> @@ -678,11 +708,12 @@ static int __init mtk_cpufreq_driver_init(void)
>  	 * and the device registration codes are put here to handle defer
>  	 * probing.
>  	 */
> -	pdev = platform_device_register_simple("mtk-cpufreq", -1, NULL, 0);
> -	if (IS_ERR(pdev)) {
> +	cpufreq_pdev = platform_device_register_data(NULL, "mtk-cpufreq", -1,
> +						     match, sizeof(*match));

Why pass match here instead of just the data ?

> +	if (IS_ERR(cpufreq_pdev)) {
>  		pr_err("failed to register mtk-cpufreq platform device\n");
>  		platform_driver_unregister(&mtk_cpufreq_platdrv);
> -		return PTR_ERR(pdev);
> +		return PTR_ERR(cpufreq_pdev);
>  	}
>  
>  	return 0;
> @@ -691,6 +722,7 @@ module_init(mtk_cpufreq_driver_init)
>  
>  static void __exit mtk_cpufreq_driver_exit(void)
>  {
> +	platform_device_unregister(cpufreq_pdev);

You fixed a bug silently :)

That's not right.

>  	platform_driver_unregister(&mtk_cpufreq_platdrv);
>  }
>  module_exit(mtk_cpufreq_driver_exit)
> -- 
> 2.18.0

-- 
viresh



More information about the Linux-mediatek mailing list