[PATCH 22/38] ASoC: rt1019: Add endianness flag in snd_soc_component_driver

[Charles Keepax]

The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.

Signed-off-by: Charles Keepax <ckeepax at opensource.cirrus.com>
---
 sound/soc/codecs/rt1019.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt1019.c b/sound/soc/codecs/rt1019.c
index d45d14fe5c427..f3f15fbe85d0e 100644
--- a/sound/soc/codecs/rt1019.c
+++ b/sound/soc/codecs/rt1019.c
@@ -515,7 +515,7 @@ static struct snd_soc_dai_driver rt1019_dai[] = {
 };
 
 static const struct snd_soc_component_driver soc_component_dev_rt1019 = {
-	.probe = rt1019_probe,
+	.probe			= rt1019_probe,
 	.controls		= rt1019_snd_controls,
 	.num_controls		= ARRAY_SIZE(rt1019_snd_controls),
 	.dapm_widgets		= rt1019_dapm_widgets,
@@ -523,6 +523,7 @@ static const struct snd_soc_component_driver soc_component_dev_rt1019 = {
 	.dapm_routes		= rt1019_dapm_routes,
 	.num_dapm_routes	= ARRAY_SIZE(rt1019_dapm_routes),
 	.non_legacy_dai_naming	= 1,
+	.endianness		= 1,
 };
 
 static const struct regmap_config rt1019_regmap = {
-- 
2.30.2