[RFC v2 4/4] arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board

[Vladimir Oltean]

On Sat, Apr 30, 2022 at 03:03:47PM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> Add Device Tree node for mt7531 switch connected to gmac0.
> 
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> ---
> v2:
> - drop status=disabled
> ---
>  .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 48 +++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> index ed2f2bd9a016..f0ffbe818170 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
> @@ -437,6 +437,54 @@ &i2c5 {
>  	status = "disabled";
>  };
>  
> +&mdio0 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	switch at 0 {

I think the preferable names are the newer "ethernet-switch at 0",
"ethernet-ports", "ethernet-port at 0".

Otherwise

Reviewed-by: Vladimir Oltean <olteanv at gmail.com>

> +		compatible = "mediatek,mt7531";
> +		reg = <0>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 1 {
> +				reg = <1>;
> +				label = "lan0";
> +			};
> +
> +			port at 2 {
> +				reg = <2>;
> +				label = "lan1";
> +			};
> +
> +			port at 3 {
> +				reg = <3>;
> +				label = "lan2";
> +			};
> +
> +			port at 4 {
> +				reg = <4>;
> +				label = "lan3";
> +			};
> +
> +			port at 5 {
> +				reg = <5>;
> +				label = "cpu";
> +				ethernet = <&gmac0>;
> +				phy-mode = "rgmii";
> +
> +				fixed-link {
> +					speed = <1000>;
> +					full-duplex;
> +					pause;
> +				};
> +			};
> +		};
> +	};
> +};
> +
>  &mdio1 {
>  	rgmii_phy1: ethernet-phy at 0 {
>  		compatible = "ethernet-phy-ieee802.3-c22";
> -- 
> 2.25.1
>