[PATCH v19 08/25] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
Nancy.Lin
nancy.lin at mediatek.com
Tue May 3 22:59:13 PDT 2022
Hi CK,
* Thanks for the review.
On Wed, 2022-05-04 at 13:28 +0800, CK Hu wrote:
> Hi, Nancy:
>
> On Tue, 2022-05-03 at 18:23 +0800, Nancy.Lin wrote:
> > Add cmdq support for mtk-mmsys config API.
> > The mmsys config register settings need to take effect with the
> > other
> > HW settings(like OVL_ADAPTOR...) at the same vblanking time.
> >
> > If we use CPU to write the mmsys reg, we can't guarantee all the
> > settings can be written in the same vblanking time.
> > Cmdq is used for this purpose. We prepare all the related HW
> > settings
> > in one cmdq packet. The first command in the packet is "wait stream
> > done",
> > and then following with all the HW settings. After the cmdq packet
> > is
> > flush to GCE HW. The GCE waits for the "stream done event" to
> > coming
> > and then starts flushing all the HW settings. This can guarantee
> > all
> > the settings flush in the same vblanking.
> >
> > Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > ---
> > drivers/soc/mediatek/mtk-mmsys.c | 52 ++++++++++++++++++----
> > ----
> > include/linux/soc/mediatek/mtk-mmsys.h | 15 ++++++--
> > 2 files changed, 48 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-mmsys.c
> > b/drivers/soc/mediatek/mtk-mmsys.c
> > index 199503dd544a..cd92db3d36fa 100644
> > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > @@ -177,6 +177,7 @@ struct mtk_mmsys {
> > spinlock_t lock; /* protects mmsys_sw_rst_b reg */
> > struct reset_controller_dev rcdev;
> > phys_addr_t io_start;
> > + struct cmdq_client_reg cmdq_base;
> > };
> >
> > static int mtk_mmsys_find_match_drvdata(struct mtk_mmsys *mmsys,
> > @@ -191,10 +192,20 @@ static int
> > mtk_mmsys_find_match_drvdata(struct
> > mtk_mmsys *mmsys,
> > return -EINVAL;
> > }
> >
> > -static void mtk_mmsys_write_reg(struct mtk_mmsys *mmsys, u32
> > offset,
> > u32 mask, u32 val)
> > +static void mtk_mmsys_write_reg(struct mtk_mmsys *mmsys, u32
> > offset,
> > u32 mask, u32 val,
> > + struct cmdq_pkt *cmdq_pkt)
> > {
> > u32 tmp;
> >
> > +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> > + if (cmdq_pkt && mmsys->cmdq_base.size) {
> > + cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
> > + mmsys->cmdq_base.offset + offset,
> > val,
> > + mask);
> > + return;
> > + }
> > +#endif
>
> How do we process the condition that cmdq_pkt != 0 and mmsys-
> > cmdq_base.size == 0? That means DRM driver want to use cmdq control
>
> but mmsys does not support cmdq function. This maybe an error that
> mmsys device node lose gce property. So I would like to print error
> message in this case.
>
> Regards,
> CK
>
OK, I will add an error message in this case.
Regards,
Nancy
> > +
> > tmp = readl_relaxed(mmsys->regs + offset);
> > tmp = (tmp & ~mask) | val;
> > writel_relaxed(tmp, mmsys->regs + offset);
> > @@ -210,7 +221,8 @@ void mtk_mmsys_ddp_connect(struct device *dev,
> >
> > for (i = 0; i < mmsys->data->num_routes; i++)
> > if (cur == routes[i].from_comp && next ==
> > routes[i].to_comp)
> > - mtk_mmsys_write_reg(mmsys, routes[i].addr,
> > routes[i].mask, routes[i].val);
> > + mtk_mmsys_write_reg(mmsys, routes[i].addr,
> > routes[i].mask, routes[i].val,
> > + NULL);
> > }
> > EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
> >
> > @@ -224,42 +236,46 @@ void mtk_mmsys_ddp_disconnect(struct device
> > *dev,
> >
> > for (i = 0; i < mmsys->data->num_routes; i++)
> > if (cur == routes[i].from_comp && next ==
> > routes[i].to_comp)
> > - mtk_mmsys_write_reg(mmsys, routes[i].addr,
> > routes[i].mask, 0);
> > + mtk_mmsys_write_reg(mmsys, routes[i].addr,
> > routes[i].mask, 0, NULL);
> > }
> > EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
> >
> > -void mtk_mmsys_merge_async_config(struct device *dev, int idx, int
> > width, int height)
> > +void mtk_mmsys_merge_async_config(struct device *dev, int idx, int
> > width, int height,
> > + struct cmdq_pkt *cmdq_pkt)
> > {
> > mtk_mmsys_write_reg(dev_get_drvdata(dev),
> > MT8195_VDO1_MERGE0_ASYNC_CFG_WD + 0x10 * idx,
> > - ~0, height << 16 | width);
> > + ~0, height << 16 | width, cmdq_pkt);
> > }
> > EXPORT_SYMBOL_GPL(mtk_mmsys_merge_async_config);
> >
> > -void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int
> > be_height)
> > +void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int
> > be_height,
> > + struct cmdq_pkt *cmdq_pkt)
> > {
> > mtk_mmsys_write_reg(dev_get_drvdata(dev),
> > MT8195_VDO1_HDRBE_ASYNC_CFG_WD, ~0,
> > - be_height << 16 | be_width);
> > + be_height << 16 | be_width, cmdq_pkt);
> > }
> > EXPORT_SYMBOL_GPL(mtk_mmsys_hdr_confing);
> >
> > void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool
> > alpha_sel, u16 alpha,
> > - u8 mode, u32 biwidth)
> > + u8 mode, u32 biwidth, struct cmdq_pkt
> > *cmdq_pkt)
> > {
> > struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
> >
> > mtk_mmsys_write_reg(mmsys, MT8195_VDO1_MIXER_IN1_ALPHA + (idx -
> > 1) * 4, ~0,
> > - alpha << 16 | alpha);
> > + alpha << 16 | alpha, cmdq_pkt);
> > mtk_mmsys_write_reg(mmsys, MT8195_VDO1_HDR_TOP_CFG, BIT(19 +
> > idx),
> > - alpha_sel << (19 + idx));
> > + alpha_sel << (19 + idx), cmdq_pkt);
> > mtk_mmsys_write_reg(mmsys, MT8195_VDO1_MIXER_IN1_PAD + (idx -
> > 1) * 4,
> > - GENMASK(31, 16) | GENMASK(1, 0), biwidth <<
> > 16 | mode);
> > + GENMASK(31, 16) | GENMASK(1, 0),
> > + biwidth << 16 | mode, cmdq_pkt);
> > }
> > EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_config);
> >
> > -void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx,
> > bool channel_swap)
> > +void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx,
> > bool channel_swap,
> > + struct cmdq_pkt *cmdq_pkt)
> > {
> > mtk_mmsys_write_reg(dev_get_drvdata(dev),
> > MT8195_VDO1_MIXER_IN1_PAD + (idx - 1) * 4,
> > - BIT(4), channel_swap << 4);
> > + BIT(4), channel_swap << 4, cmdq_pkt);
> > }
> > EXPORT_SYMBOL_GPL(mtk_mmsys_mixer_in_channel_swap);
> >
> > @@ -272,9 +288,9 @@ static int mtk_mmsys_reset_update(struct
> > reset_controller_dev *rcdev, unsigned l
> > spin_lock_irqsave(&mmsys->lock, flags);
> >
> > if (assert)
> > - mtk_mmsys_write_reg(mmsys, mmsys->data-
> > >sw0_rst_offset,
> > BIT(id), 0);
> > + mtk_mmsys_write_reg(mmsys, mmsys->data-
> > >sw0_rst_offset,
> > BIT(id), 0, NULL);
> > else
> > - mtk_mmsys_write_reg(mmsys, mmsys->data-
> > >sw0_rst_offset,
> > BIT(id), BIT(id));
> > + mtk_mmsys_write_reg(mmsys, mmsys->data-
> > >sw0_rst_offset,
> > BIT(id), BIT(id), NULL);
> >
> > spin_unlock_irqrestore(&mmsys->lock, flags);
> >
> > @@ -364,6 +380,12 @@ static int mtk_mmsys_probe(struct
> > platform_device *pdev)
> > mmsys->data = match_data->drv_data[0];
> > }
> >
> > +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> > + ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
> > + if (ret)
> > + dev_dbg(dev, "No mediatek,gce-client-reg!\n");
> > +#endif
> > +
> > platform_set_drvdata(pdev, mmsys);
> >
> > clks = platform_device_register_data(&pdev->dev, mmsys->data-
> > > clk_driver,
> >
> > diff --git a/include/linux/soc/mediatek/mtk-mmsys.h
> > b/include/linux/soc/mediatek/mtk-mmsys.h
> > index fe620929b0f9..7a73305390ba 100644
> > --- a/include/linux/soc/mediatek/mtk-mmsys.h
> > +++ b/include/linux/soc/mediatek/mtk-mmsys.h
> > @@ -6,6 +6,10 @@
> > #ifndef __MTK_MMSYS_H
> > #define __MTK_MMSYS_H
> >
> > +#include <linux/mailbox_controller.h>
> > +#include <linux/mailbox/mtk-cmdq-mailbox.h>
> > +#include <linux/soc/mediatek/mtk-cmdq.h>
> > +
> > enum mtk_ddp_comp_id;
> > struct device;
> >
> > @@ -73,13 +77,16 @@ void mtk_mmsys_ddp_disconnect(struct device
> > *dev,
> > enum mtk_ddp_comp_id cur,
> > enum mtk_ddp_comp_id next);
> >
> > -void mtk_mmsys_merge_async_config(struct device *dev, int idx, int
> > width, int height);
> > +void mtk_mmsys_merge_async_config(struct device *dev, int idx, int
> > width,
> > + int height, struct cmdq_pkt
> > *cmdq_pkt);
> >
> > -void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int
> > be_height);
> > +void mtk_mmsys_hdr_confing(struct device *dev, int be_width, int
> > be_height,
> > + struct cmdq_pkt *cmdq_pkt);
> >
> > void mtk_mmsys_mixer_in_config(struct device *dev, int idx, bool
> > alpha_sel, u16 alpha,
> > - u8 mode, u32 biwidth);
> > + u8 mode, u32 biwidth, struct cmdq_pkt
> > *cmdq_pkt);
> >
> > -void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx,
> > bool channel_swap);
> > +void mtk_mmsys_mixer_in_channel_swap(struct device *dev, int idx,
> > bool channel_swap,
> > + struct cmdq_pkt *cmdq_pkt);
> >
> > #endif /* __MTK_MMSYS_H */
>
>
More information about the Linux-mediatek
mailing list