[PATCH v24 0/7] soc: mediatek: SVS: introduce MTK SVS
Kevin Hilman
khilman at kernel.org
Mon May 2 15:07:58 PDT 2022
Chen-Yu Tsai <wenst at chromium.org> writes:
> On Fri, Apr 22, 2022 at 11:38 PM Matthias Brugger
> <matthias.bgg at gmail.com> wrote:
>>
>>
>>
>> On 22/04/2022 04:24, Roger Lu wrote:
>> > Hi Kevin,
>> >
>> > On Thu, 2022-04-21 at 12:41 -0700, Kevin Hilman wrote:
>> >> Hi Roger,
>> >>
>> >> Roger Lu <roger.lu at mediatek.com> writes:
>> >>
>> >>> On Wed, 2022-04-20 at 16:22 -0700, Kevin Hilman wrote:
>> >>
>> >> [...]
>> >>
>> >>>> That being said, it would be really nice to see an integration tree
>> >>>> where this was all tested on mainline (e.g. v5.17, or v5.18-rc)
>> >>>>
>> >>>> For example, I can apply this to v5.18-rc2 and boot on my mt8183-pumpkin
>> >>>> board, it fails to probe[1] because there is no CCI node in the upstream
>> >>>> mt8183.dtsi.
>> >>>>
>> >>>> I'm assuming this series is also not very useful without the CPUfreq
>> >>>> series from Rex, so being able to test this, CCI and CPUfreq together on
>> >>>> MT8183 on a mainline kernel would be very helpful.
>> >>>>
>> >>>> Kevin
>> >>>>
>> >>>> [1]
>> >>>> [ 0.573332] mtk-svs 1100b000.svs: cannot find cci node
>> >>>> [ 0.574061] mtk-svs 1100b000.svs: error -ENODEV: svs platform probe
>> >>>> fail
>> >>>
>> >>> Just share. I've tested this series on below two platforms and it works as
>> >>> expected.
>> >>> - mt8183-Krane (kernel-v5.10)
>> >>> - mt8192-Hayato (kernel-v5.4)
>> >>
>> >> Unfortunately testing on v5.4 and v5.10 with lots of other additional
>> >> out-of-tree patches does not give much confidence that this series works
>> >> with upstream, especially when I've given a few reasons why it will not
>> >> work uptream.
>> >>
>> >> The examples I gave above for CCI and CPUs/cluster disable are good
>> >> examples, but another one I forgot to mention is the dependency on Mali.
>> >> The SVS driver will never probe because it also depens on a "mali" node,
>> >> which doesn't exist upstream either (but panfrost does, and acutually
>> >> loads/probes fine on v5.17/v5.18) so this should be fixed to work with
>> >> upstream panfrost.
>> >>
>> >> IMO, in order for this to be merged upstream, it should at least have
>> >> some basic validation with upstream, and so far I have not even been
>> >> able to make it successfuly probe. To do that, you will need to either
>> >> provide a list of the dependencies for testing this with mainline
>> >> (e.g. CCI series, CPUfreq series, any DT changes), or even better, an
>> >> integration tree based on recent mainline (e.g. v5.17 stable, or
>> >> v5.18-rc) which shows all the patches (in addition to this series) used
>> >> to validate this on mainline.
>> >
>> > No problem. We'll find a machine that can be run correctly with recent mainline
>> > (e.g. v5.17 stable, or v5.18-rc) and add patches (CCI series + CPUfreq series +
>> > any DT changes) to test this SVS series. Thanks very much.
>> >
>>
>> Thanks Roger. I'll wait until this got tested with upstream Linux, before I will
>> apply all the patches.
>
> Hi everyone,
>
> I've put together an integration test branch:
>
> https://github.com/wens/linux/commits/mt8183-cpufreq-cci-svs-test
>
> This branch is based on next-20220422 and includes the following series:
>
> - ANX7625 DPI support v2
> https://lore.kernel.org/all/20220422084720.959271-1-xji@analogixsemi.com/
> - MTK SVS v24
> https://lore.kernel.org/all/20220420102044.10832-1-roger.lu@mediatek.com/
> - MTK cpufreq v4
> https://lore.kernel.org/all/20220422075239.16437-1-rex-bc.chen@mediatek.com/
> - PM / devfreq core patches from
> http://git.kernel.org/chanwoo/h/devfreq-testing
> PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
> PM / devfreq: Add cpu based scaling support to passive governor
> PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
> PM / devfreq: passive: Update frequency when start governor
> - CCI devfreq v2
> https://lore.kernel.org/all/20220408052150.22536-1-johnson.wang@mediatek.com/
>
> And some patches of my own to fix some errors. See the last handful of
> patches including and after the fixup! one.
Thanks for setting up this branch.
> This was tested on Juniper (Acer Chromebook Spin 311) that has MT8183.
Is there an upstream DT for this platform?
I tried this series on mt8183-pumpkin, and since the upstream DT doesn't
define a CCI regulator, the CCI driver fails to probe. Without CCI, the
SVS driver also fails to probe. So the platform boots, but has neither
CCI nor SVS.
If I add a regulator for CCI[1], it goes farther, but then fails more
noisly[2]
> Looking at the mcu_*_sel clocks from /sys/kernel/debug/clk/clk_summary ,
> it does seem like things are happening, though I'm not sure how to
> thoroughly test this, especially SVS.
I think you're probably seeing CPU DVFS (CPUfreq) working, but I suspect
neither CCI or SVS have successfully loaded.
Kevin
[1]
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index b288b508fa4c..e064c06dc0d7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -384,6 +384,10 @@ &mfg {
domain-supply = <&mt6358_vgpu_reg>;
};
+&cci {
+ proc-supply = <&mt6358_vproc12_reg>;
+};
+
&cpu0 {
proc-supply = <&mt6358_vproc12_reg>;
};
[2]
[ 0.560083] mtk-ccifreq cci: devfreq_add_device: Unable to start governor for the device
[ 0.576083] ------------[ cut here ]------------
[ 0.576670] WARNING: CPU: 3 PID: 1 at drivers/devfreq/governor_passive.c:382 devfreq_passive_event_handler+0x80/0x3a0
[ 0.578021] Modules linked in:
[ 0.578413] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc3-next-20220422-05886-g9cd0610279c1-dirty #58
[ 0.579653] Hardware name: Pumpkin MT8183 (DT)
[ 0.580217] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.581097] pc : devfreq_passive_event_handler+0x80/0x3a0
[ 0.581780] lr : devfreq_passive_event_handler+0x7c/0x3a0
[ 0.582463] sp : ffff80000808ba40
[ 0.582883] x29: ffff80000808ba40 x28: 0000000000000000 x27: fffffffffffffdfb
[ 0.583788] x26: ffff0000037ba810 x25: ffff80000808bb40 x24: ffff80000a406640
[ 0.584691] x23: ffff8000099153c8 x22: ffff0000037ba800 x21: 0000000000000000
[ 0.585595] x20: ffff0000035c40a0 x19: ffff0000035c4080 x18: 0000000000000000
[ 0.586267] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 0.586498] x17: 6f6620726f6e7265 x16: 766f672074726174 x15: 000006837f6218f7
[ 0.588233] x14: 0000000000000320 x13: 0000000000000001 x12: 0000000000000000
[ 0.589137] x11: 0000000000000001 x10: 0000000000000a50 x9 : ffff80000808b7a0
[ 0.590041] x8 : ffff0000028b0ab0 x7 : ffff00007fb19d00 x6 : 00000000076832c3
[ 0.590945] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : ffff80000a3f70e8
[ 0.591849] x2 : 0000000000000000 x1 : ffff0000028b0000 x0 : 00000000fffffffe
[ 0.592753] Call trace:
[ 0.593065] devfreq_passive_event_handler+0x80/0x3a0
[ 0.593706] devfreq_remove_device+0x38/0xd0
[ 0.594247] devfreq_add_device+0x328/0x5f0
[ 0.594778] devm_devfreq_add_device+0x64/0xb0
[ 0.595341] mtk_ccifreq_probe+0x340/0x4e0
[ 0.595860] platform_probe+0x68/0xe0
[ 0.596330] really_probe.part.0+0x9c/0x29c
[ 0.596862] __driver_probe_device+0x98/0x144
[ 0.597416] driver_probe_device+0xac/0x140
[ 0.597948] __driver_attach+0xf8/0x190
[ 0.598436] bus_for_each_dev+0x70/0xd0
[ 0.598925] driver_attach+0x24/0x30
[ 0.599380] bus_add_driver+0x14c/0x1f0
[ 0.599868] driver_register+0x78/0x130
[ 0.600356] __platform_driver_register+0x28/0x34
[ 0.600954] mtk_ccifreq_platdrv_init+0x1c/0x28
[ 0.601531] do_one_initcall+0x50/0x1c0
[ 0.602021] kernel_init_freeable+0x20c/0x290
[ 0.602576] kernel_init+0x28/0x13c
[ 0.603024] ret_from_fork+0x10/0x20
[ 0.603480] ---[ end trace 0000000000000000 ]---
More information about the Linux-mediatek
mailing list